Bug#1230: lilo-1.3.11 bootdisk 25th July fails
Package: (bootdisk)
Version: lilo-1.3.11-bootdisk-24-Jul-95
(This message was, I think, lost the first time around. If this is
the second copy you see let me know ASAP at iwj10@thor.cam.ac.uk, as
it means that some other message was lost.)
This bootdisk gets very badly confused while trying to talk to my SCSI
controller. The messages I see are (typed in from a piece of paper,
so not necessarily completely accurate; `...' indicates something that
didn't seem relevant which I didn't write down):
hda: Conner ....
ide0: primary interface on irq 14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a 8727A
aha152x: porttest failed
BusLogic SCSI: buslogic_out: failed (4): BusLogic SCSI: buslogic_stat
status=39 intrflags=84
BusLogic SCSI: setup_mailboxes failed
Configuring Adaptec at IO:330, IRQ 11, DMA priority 5
eata_dma ... skipping ...
scsi0 : Adaptec 1542
scsi : 1 host
scsi : aborting command due to timeout : pid 0 scsi 0, channel 0, id
0, lun 0, inquiry 00 00 00 ff 00
scsi : aborting command due to timeout : pid 0 scsi 0, channel 0, id
0, lun 0, inquiry 00 00 00 ff 00
and it just goes downhill from there. The SCSI disk light comes on
and stays on sometime around the aha142x or BusLogic probe.
The message about my Adaptec, a 1542B, looks right - it's the same one
as I normally see. My /proc/interrupts, /proc/ioports and /proc/dma
are below.
As a complication, the single IDE hard disk I have is not in the
CMOS. I don't think this is relevant, though.
Ian.
chiark:~> cat /proc/interrupts
0: 42459 timer
1: 2690 keyboard
2: 0 + cascade
4: 1164 + serial
5: 1 3c503
9: 26 + serial
11: 3549 aha1542
13: 1 math error
14: 898 + ide0
15: 0 + sound
chiark:~> cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-0060 : kbd
0064-0064 : kbd
0070-007f : rtc
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00f1 : npu
00f8-00ff : npu
01f0-01f7 : ide0
02a0-02a7 : serial(set)
02a8-02af : serial(set)
02b0-02b7 : serial(set)
02b8-02bf : serial(set)
02e0-02ef : 3c503
02f8-02ff : serial(set)
0330-0333 : aha1542
0378-037a : lp
03d4-03d5 : ega+
03f6-03f6 : ide0
03f8-03ff : serial(set)
chiark:~> cat /proc/dma
4: cascade
5: aha1542
chiark:~>
Reply to: