Package: installation-reports Boot method: DVD Image version: debian-live-7.0.0-i386-xfce-desktop.iso http://cdimage.debian.org/cdimage/archive/7.0.0/i386/iso-dvd/ Date: Sep 28 06:22 Machine: GIGABYTE GA-E7AUM-DS2H LGA 775 NVIDIA GeForce 9400 HDMI Micro ATX Intel Motherboard Processor: Intel Pentium E6300 Wolfdale 2.8GHz LGA 775 65W Dual-Core Processor Memory: Crucial 2GB 240-Pin DDR2 SDRAM DDR2 667 (PC2 5300) Desktop Memory Partitions: output of "fdisk -l" from sysresccd 3.6.0: Disk /dev/sda: 500.1 GB, 500106780160 bytes, 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3bdc Device Boot Start End Blocks Id System /dev/sda1 16065 16305974 8144955 83 Linux /dev/sda2 * 16305975 94654979 39174502+ c W95 FAT32 (LBA) /dev/sda3 94654980 173003984 39174502+ 7 HPFS/NTFS/exFAT /dev/sda4 173004046 976768064 401882009+ f W95 Ext'd (LBA) /dev/sda5 173004048 329701994 78348973+ c W95 FAT32 (LBA) /dev/sda6 329702058 486400004 78348973+ c W95 FAT32 (LBA) /dev/sda7 486400068 643098014 78348973+ c W95 FAT32 (LBA) /dev/sda8 643098078 799796024 78348973+ c W95 FAT32 (LBA) /dev/sda9 799796088 832375844 16289878+ 83 Linux /dev/sda10 832375908 864955664 16289878+ 83 Linux /dev/sda11 864955728 897535484 16289878+ 83 Linux /dev/sda12 897535548 930115304 16289878+ 83 Linux /dev/sda13 930115368 946405214 8144923+ 83 Linux /dev/sda14 946405278 962695124 8144923+ 83 Linux /dev/sda15 962695188 976768064 7036438+ 82 Linux swap / Solaris pci data: output of "lspci -knn" from sysresccd 3.6.0: 00:00.0 Host bridge [0600]: NVIDIA Corporation MCP79 Host Bridge [10de:0a80] (rev b1) 00:00.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a88] (rev b1) 00:03.0 ISA bridge [0601]: NVIDIA Corporation MCP79 LPC Bridge [10de:0aac] (rev b2) Subsystem: Giga-byte Technology Device [1458:5001] 00:03.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0aa4] (rev b1) 00:03.2 SMBus [0c05]: NVIDIA Corporation MCP79 SMBus [10de:0aa2] (rev b1) Subsystem: Giga-byte Technology Device [1458:0aa2] Kernel driver in use: nForce2_smbus Kernel modules: i2c_nforce2 00:03.3 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a89] (rev b1) 00:03.4 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a98] (rev b1) Subsystem: NVIDIA Corporation iMac 9,1 [10de:cb79] 00:03.5 Co-processor [0b40]: NVIDIA Corporation MCP79 Co-processor [10de:0aa3] (rev b1) Subsystem: NVIDIA Corporation Apple iMac 9,1 [10de:cb79] 00:04.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) Subsystem: Giga-byte Technology Device [1458:5004] Kernel driver in use: ohci_hcd 00:04.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) Subsystem: Giga-byte Technology Device [1458:5004] Kernel driver in use: ehci_hcd 00:06.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) Subsystem: Giga-byte Technology Device [1458:5004] Kernel driver in use: ohci_hcd 00:06.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) Subsystem: Giga-byte Technology Device [1458:5004] Kernel driver in use: ehci_hcd 00:08.0 Audio device [0403]: NVIDIA Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1) Subsystem: Giga-byte Technology Device [1458:a102] 00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) 00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP79 Ethernet [10de:0ab0] (rev b1) Subsystem: Giga-byte Technology Device [1458:e000] Kernel driver in use: forcedeth Kernel modules: forcedeth 00:0b.0 IDE interface [0101]: NVIDIA Corporation MCP79 SATA Controller [10de:0ab4] (rev b1) Subsystem: Giga-byte Technology Device [1458:b002] Kernel driver in use: ahci Kernel modules: pata_acpi, ata_generic 00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) Kernel modules: shpchp 00:16.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) Kernel driver in use: pcieport Kernel modules: shpchp 01:05.0 Serial controller [0700]: 3Com Corp, Modem Division 56K FaxModem Model 5610 [12b9:1008] (rev 01) Subsystem: 3Com Corp, Modem Division USR 56k Internal FAX Modem (Model 2977) [12b9:00a2] Kernel driver in use: serial 01:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] Subsystem: Giga-byte Technology Motherboard [1458:1000] Kernel driver in use: firewire_ohci Kernel modules: firewire_ohci 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400] [10de:086a] (rev b1) Subsystem: Giga-byte Technology Device [1458:d000] Kernel driver in use: nouveau Kernel modules: nouveau 03:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] Subsystem: Giga-byte Technology Device [1458:b000] Kernel driver in use: pata_jmicron Kernel modules: pata_jmicron, pata_acpi, ata_generic /var/log/installer/syslog is attached. Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [o] Detect network card: [o] Configure network: [ ] Detect CD: [o] Load installer modules: [o] Detect hard drives: [o] Partition hard drives: [ ] Install base system: [o] Clock/timezone setup: [o] User/password setup: [o] Install tasks: [e] Install boot loader: [e] Overall install: [e] Comments/Problems: the install fails to install grub. the install produces a system not bootable from the hard drive. Description of the install: no network connection was available for the install. the disk was already properly partitioned. the live dvd contains the graphical installer. the installer copied base system files without error. then the following sequence occurred: [newscreen] configure the package manager <go back> <continue> [newscreen] install the grub boot loader on a hard disk [errorbox] grub installation failed. the grub-pc package failed to install into /target/ without the grub boot loader the installed system will not boot <go back> <continue> [errorbox] installation step failed. an installation step failed. you can try to run the failing item again from the menu or skip it and choose something else. the failing step is install the grub boot loader on a hard disk. <go back> <continue> [newscreen] continue without boot loader [errorbox] no boot loader installed. no boot loader has been installed. either because you choose not to or because one specific architecture doesn't support a boot loader yet. you will need to boot manually with the /vmlinuz kernel on partition /dev/sda10 and root=/dev/sda10 passed as a kernel argument. <go back> <continue> -- http://www.fastmail.fm - Email service worth paying for. Try it for free
Attachment:
syslog
Description: Binary data