Your message dated Sun, 25 Aug 2013 12:42:38 +0200 with message-id <201308251243.25305.holger@layer-acht.org> and subject line dealing with old installation-reports has caused the Debian Bug report #680555, regarding installation-reports bug to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 680555: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680555 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-reports bug
- From: Damian Montaldo <damianmontaldo@gmail.com>
- Date: Fri, 6 Jul 2012 15:40:20 -0300
- Message-id: <CAFb4Da+gXcLHert7wjoxYrJ-oZv4vtoq8nriykXdF5fJNjH4pg@mail.gmail.com>
Package: installation-reports Boot method: netboot Image version: http://ftp.nl.debian.org/debian/dists/wheezy/main/installer-amd64/current/images/netboot/netboot.tar.gz Date: 06 July 2012 Machine: Processor: Intel Core i7 CPU 950 @3.07GHz Memory: 4GB Partitions: not partion Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) Subsystem: Intel Corporation Device [8086:5042] 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) Kernel driver in use: pcieport 00:10.0 PIC [0800]: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 [8086:3425] (rev 13) 00:10.1 PIC [0800]: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 13) 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) Kernel driver in use: i7core_edac 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) 00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-2 Gigabit Network Connection [8086:10cc] Subsystem: Intel Corporation Device [8086:0000] Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: Intel Corporation Device [8086:0022] Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 [8086:3a42] Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Intel Corporation Device [8086:5042] 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: ata_piix 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1044] Kernel driver in use: nvidia 02:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device [19da:1044] Kernel driver in use: snd_hda_intel 03:00.0 3D controller [0302]: NVIDIA Corporation GT200 [Tesla C1060] [10de:05e7] (rev a1) Subsystem: NVIDIA Corporation Device [10de:066a] Kernel driver in use: nvidia 07:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] [104c:8023] Subsystem: Intel Corporation Device [8086:5042] Kernel driver in use: firewire_ohci 3f:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder [8086:2c01] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0 [8086:2c10] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 [8086:2c11] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller [8086:2c18] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers [8086:2c1c] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05) Subsystem: Intel Corporation Device [8086:8086] 3f:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [E] Detect network card: [ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system: [ ] Clock/timezone setup: [ ] User/password setup: [ ] Install tasks: [ ] Install boot loader: [ ] Overall install: [ ] Comments/Problems: After boot the kernel, it freeze with the 3 led of the keyboard on... I can't get more information. It boot ok with the netboot of squeeze.
--- End Message ---
--- Begin Message ---
- To: 696737-done@bugs.debian.org, 607698-done@bugs.debian.org, 606496-done@bugs.debian.org, 603960-done@bugs.debian.org, 701827-done@bugs.debian.org, 686786-done@bugs.debian.org, 685681-done@bugs.debian.org, 685515-done@bugs.debian.org, 685047-done@bugs.debian.org, 685308-done@bugs.debian.org, 684639-done@bugs.debian.org, 683706-done@bugs.debian.org, 683705-done@bugs.debian.org, 683381-done@bugs.debian.org, 682753-done@bugs.debian.org, 682507-done@bugs.debian.org, 682008-done@bugs.debian.org, 680555-done@bugs.debian.org, 681673-done@bugs.debian.org, 680026-done@bugs.debian.org, 679795-done@bugs.debian.org, 675127-done@bugs.debian.org, 674855-done@bugs.debian.org, 672317-done@bugs.debian.org, 673649-done@bugs.debian.org, 605076-done@bugs.debian.org, 690752-done@bugs.debian.org, control@bugs.debian.org
- Subject: dealing with old installation-reports
- From: Holger Levsen <holger@layer-acht.org>
- Date: Sun, 25 Aug 2013 12:42:38 +0200
- Message-id: <201308251243.25305.holger@layer-acht.org>
reassign 701201 src:linux retitle 701201 libata.atapi_passthru16=0 is needed by some hardware forcemerge 690985 686954 thanks Hi, thank you for submitting installation reports, much appreciated. I read through all the bugs mentioned here (and I'm sure they were read by several people at the time they were submitted) and am closing them now as/if - they (finally) indicated success and/or - I know from first hand experience that the functionality is working in Wheezy and/or - they only contained very little information and/or - they contained user errors and/or - they were caused by broken hardware and/or - they have been from a development phase where things were not stable and/or - they are quite old (and thus likely fixed today) and/or - moreinfo was asked and not given. If I've closed a bug incorrectly please do reply (it's easy to reopen and I'll do if requested) or just file a new one - thats often better, as the bug log will be clearer and shorter and not contain cruft. cheers, HolgerAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---