Bug#720538: installation-reports ; elilo could not be installed
Package: installation-reports
Boot method: netboot
Image version: Debian version: 7 (wheezy) Installer build: 20130613
Date: 2013-Aug-19
Machine: hp rx2800i2 AH395A
Processor: Itanium(R) Processor 9340 (1.6 GHz, 20 MB)
Memory: 12179 MB (11.89 GB)
Partitions: --
Output of lspci -nn and lspci -vnn:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [E -> O] *1
Partition hard drives: [O ]
Install base system: [O ]
Clock/timezone setup: [O ]
User/password setup: [O ]
Install tasks: [O ]
Install boot loader: [E ] *2
Overall install: [ ]
Comments/Problems:
(*1)
When starting installer-kernel, smart arry disk was not detected by kernel.
By the HPUX-11iv3 , 2disks are identified. P410i controller mode is HBA
xxx@rx2800a:~/tools#ioscan -m dsf
Persistent DSF Legacy DSF(s)
========================================
/dev/rdisk/disk11 /dev/rdsk/c0t8d6 ------- for debian
/dev/rdisk/disk12 /dev/rdsk/c0t8d7 -------- for HPUX
/dev/rdisk/disk12_p1 /dev/rdsk/c0t8d7s1
/dev/rdisk/disk12_p2 /dev/rdsk/c0t8d7s2
/dev/rdisk/disk12_p3 /dev/rdsk/c0t8d7s3
/dev/rdisk/disk17 /dev/rdsk/c2t0d0-------dvd
After reconfigured p410i to RAID mode, hpsa driver detected disk as sda and sdb.
#ioscan -m dsf
# ioscan -m dsf
Persistent DSF Legacy DSF(s)
========================================
/dev/rdisk/disk3 /dev/rdsk/c0t0d0 ------ for hpux : sda
/dev/rdisk/disk3_p1 /dev/rdsk/c0t0d0s1
/dev/rdisk/disk3_p2 /dev/rdsk/c0t0d0s2
/dev/rdisk/disk3_p3 /dev/rdsk/c0t0d0s3
/dev/rdisk/disk4 /dev/rdsk/c0t0d1 ------ for debian : sdb
/dev/rdisk/disk6 /dev/rdsk/c2t0d0
(*2)
To install elilo.efi failed. it seems to be a same bug Debian Bug report logs - #685186
lqqqqqqqu [!!] Install the elilo boot loader on a hard disk tqqqqqqqk
x x
x No boot partitions detected x
x There were no suitable partitions found for elilo to use. Elilo x
x needs a partition with a FAT file system, and the boot flag set. x
x x
x <Continue> x
in the rescue shell
~ # mount
rootfs on / type rootfs (rw)
none on /run type tmpfs (rw,nosuid,relatime,size=1232800k,mode=755)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=755)
none on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
/dev/sdb2 on /target type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered)
/dev/sdb1 on /target/boot/efi type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=utf8,shortname=mixed,errors=remount-ro)
/dev/sdb2 on /dev/.static/dev type ext4 (rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered)
tmpfs on /target/dev type tmpfs (rw,relatime,mode=755)
~ # lsmod
Module Size Used by
nls_utf8 1984 1
nls_cp437 6313 1
dm_mod 153660 0
md_mod 233761 0
xfs 1124239 0
jfs 371400 0
ext4 605201 1
crc16 1447 1 ext4
jbd2 128138 1 ext4
ext3 277761 0
jbd 116754 1 ext3
crc32c 3624 1
libcrc32c 1674 0
zlib_deflate 49587 0
vfat 22167 1
fat 108504 1 vfat
ext2 143117 0
mbcache 12522 3 ext2,ext3,ext4
sr_mod 34681 0
cdrom 75511 1 sr_mod
sd_mod 76738 4
sg 48599 0
crc_t10dif 1436 1 sd_mod
ahci 30709 0
libahci 45630 1 ahci
libata 337246 2 libahci,ahci
hpsa 105439 3
usb_storage 76351 0
scsi_mod 255995 6 usb_storage,hpsa,libata,sg,sd_mod,sr_mod
usbhid 63086 0
hid 150716 1 usbhid
uhci_hcd 55889 0
ehci_hcd 96948 0
usbcore 302704 5 ehci_hcd,uhci_hcd,usbhid,usb_storage
igb 269080 0
usb_common 970 1 usbcore
e1000e 346662 0
Reply to: