[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#657154: marked as done (Fwd: Testing Net-intall bug)

Your message dated Tue, 30 Jul 2013 11:34:46 +0200
with message-id <201307301135.02366.holger@layer-acht.org>
and subject line dealing with old installation-reports
has caused the Debian Bug report #657154,
regarding Fwd: Testing Net-intall bug
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
657154: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=657154
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

Boot method: CD and USB key
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/
debian-testing-i386-netinst.iso              23 and 24-Jan-2012
Date: 23 and 24-Jan-2012

Machine: Dell Optiplex 260 and Dell Latitude D410
Processor: Petium 4 CPU 2GHz
Memory: 1Go
Partitions: NO SIGNIFICANT
/dev/sda3              62G  9,4G   49G  16% /
/dev/sdb1             184G  188M  174G   1% /data

Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 01)
    Kernel driver in use: agpgart-intel
    Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [8086:2561] (rev 01)
    Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01)
    Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01)
    Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01)
    Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01)
    Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 81)
    Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 01)
    Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 01)
    Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
    Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV17 [GeForce4 MX 420] [10de:0172] (rev a3)
    Kernel driver in use: nouveau
    Kernel modules: nvidiafb, rivafb, nouveau
02:0c.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
    Kernel driver in use: e1000
    Kernel modules: e1000


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [E]
Configure network:      [E]
Detect CD:              [O]
Load installer modules: [E]  it stop here.
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:
 * First warning message just after the language choice :
"No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of installer and the kernel version availablein the archive. [...] COntinue the install without loadig kernel modules?"

If I choose to continue the ethernet card is not recognize :
"No ethernet card was detected.[...]"
"Driver needed by your Ethernet card :
    No ethernet card
    hdlc
    none of above"

Fisrt two choices loop back
Third choice :
"A driver for your hardware is not available. [...] Load missing drivers from removable media ?"
If I choose Yes, the USB key not recognized.

Here the installation stops.

Thanks !
Bertrand


--- End Message ---
--- Begin Message --- 
reassign 709005 xserver-xorg-video-nouveau
reassign 706880 network-manager
reassign 658344 xserver-xorg
severity 666547 normal 
# 666547 is "lovely". close?
thanks

Hi,

thank you for submitting installation reports, much appreciated.

I read through all the bugs mentioned here (and I'm sure they were read by 
several people at the time they were submitted) and am closing them now as/if
- they (finally) indicated success and/or
- I know from first hand experience that the functionality is working in 
Wheezy and/or
- they only contained very little information and/or
- they contained user errors and/or
- they were caused by broken hardware and/or
- they have been from a development phase where things were not stable and/or
- they are very old (and due to the above reasons very probably fixed by now).

If I've closed a bug incorrectly please do reply (it's easy to reopen and I'll 
do if requested) or just file a new one - thats often better, as the bug log 
will be clearer and shorter and not contain cruft.


cheers,
        Holger

Attachment: signature.asc
Description: This is a digitally signed message part.


--- End Message ---
Reply to: