[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#707641: overriding root device on TS-419 non-working



Package: flash-kernel
Version: 3.3
Severity: serious

Hi!

  Overriding the RootFS device for the initramfs doesn't seem to
work. Might well also be a bug in initramfs-tools. Setting serious
because it prevents this system from booting, feel free to change.

[   17.714542] IP-Config: eth0 hardware address 00:08:9b:d1:4b:10 mtu 1500 DHCP RARP
[   17.714549] IP-Config: eth0 complete (dhcp from 10.70.255.1):
[   17.714552]  address: 10.42.0.6        broadcast: 10.255.255.255   netmask: 255.0.0.0       
[   17.714556]  gateway: 10.130.130.130   dns0     : 172.16.0.1       dns1   : 0.0.0.0         
[   17.714559]  domain : asgard                                                          
[   17.714563]  rootserver: 10.42.23.2 rootpath: 
[   17.714566]  filename  : F_TS-419P2+
[   17.728125] Begin: Assembling all MD arrays ... 
[   17.776829] md: md0 stopped.
[   17.786608] md: bind<sdb1>
[   17.786976] md: bind<sdc1>
[   17.787305] md: bind<sdd1>
[   17.787987] md: bind<sda1>
[   17.981071] raid6: int32x1    122 MB/s
[   18.151049] raid6: int32x2    192 MB/s
[   18.321192] raid6: int32x4    200 MB/s
[   18.491240] raid6: int32x8    254 MB/s
[   18.491265] raid6: using algorithm int32x8 (254 MB/s)
[   18.494632] async_tx: api initialized (async)
[   18.495755] xor: measuring software checksum speed
[   18.541021]    arm4regs  :  1810.400 MB/sec
[   18.591022]    8regs     :  1086.000 MB/sec
[   18.641019]    32regs    :  1503.600 MB/sec
[   18.641042] xor: using function: arm4regs (1810.400 MB/sec)
[   18.667005] md: raid6 personality registered for level 6
[   18.667054] md: raid5 personality registered for level 5
[   18.667073] md: raid4 personality registered for level 4
[   18.667836] bio: create slab <bio-1> at 1
[   18.667889] md/raid:md0: not clean -- starting background reconstruction
[   18.667926] md/raid:md0: device sda1 operational as raid disk 0
[   18.667950] md/raid:md0: device sdd1 operational as raid disk 3
[   18.667972] md/raid:md0: device sdc1 operational as raid disk 2
[   18.667992] md/raid:md0: device sdb1 operational as raid disk 1
[   18.668728] md/raid:md0: allocated 4218kB
[   18.668834] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[   18.668983] md0: detected capacity change from 0 to 6000789159936
[   18.669072] mdadm: /dev/md/0 has been started with 4 drives.
[   18.685574]  md0: unknown partition table
[   18.869802] Success: assembled all arrays.
[   18.869948] done.
[   18.871347] + [ -e /conf/param.conf ]
[   18.871682] + . /conf/param.conf
[   18.871914] + ROOT=/dev/mapper/root-root
[   18.872071] + debug=y
[   18.872208] + rootdelay=2
[   18.872366] + /scripts/local-top/lvm2
[   18.882717] device-mapper: uevent: version 1.0.3
[   18.883977] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   18.922123]   Volume group "root" not found
[   18.922443]   Skipping volume group root
[   18.923555] Unable to find LVM volume root/root
[   18.924038] + [ -e /conf/param.conf ]
[   18.924365] + . /conf/param.conf
[   18.924596] + ROOT=/dev/mapper/root-root
[   18.924752] + debug=y
[   18.924889] + rootdelay=2
[   18.925046] + /scripts/local-top/cryptroot
[   18.959385] Unlocking the disk /dev/disk/by-uuid/b55ee1d9-d00e-42c4-946c-a4d85e169d3b (md0_crypt)
[   18.959467] Enter passphrase: [   26.957381]   Reading all physical volumes.  This may take a while...
[   26.971742]   Found volume group "root" using metadata type lvm2
[   27.038792]   1 logical volume(s) in volume group "root" now active
[   28.453053] /scripts/local-top/cryptroot: line 1: can't open /dev/ram: no such file
[   28.453760] cryptsetup: md0_crypt set up successfully
[   28.458560] + [ -e /conf/param.conf ]
[   28.458905] + . /conf/param.conf
[   28.459138] + ROOT=/dev/mapper/root-root
[   28.459293] + debug=y
[   28.459430] + rootdelay=2
[   28.459566] + ROOT=/dev/ram
[   28.459749] + [ n != y ]
[   28.460065] + log_end_msg
[   28.460194] + _log_msg done.\n
[   28.460374] + [ n = y ]
[   28.460684] + printf done.\n
[   28.460832] done.
[   28.460892] + wait_for_udev 10
[   28.461121] + command -v udevadm
[   28.461408] + udevadm settle --timeout=10
[   28.465738] + [ -n  ]
[   28.466096] + [ /ram = /dev/ram ]
[   28.466429] + [ ! -e /dev/ram ]
[   28.466765] + log_begin_msg Waiting for root file system
[   28.466958] + _log_msg Begin: Waiting for root file system ... 
[   28.467149] + [ n = y ]
[   28.467469] + printf Begin: Waiting for root file system ... 
[   28.467623] Begin: Waiting for root file system ... + slumber=2
[   28.467868] + slumber=20
[   28.468017] + [ ! -e /dev/ram ]
[   28.468337] + /bin/sleep 0.1
[   28.570103] + slumber=19
[   28.570297] + [ 19 -gt 0 ]
[   28.570654] + [ ! -e /dev/ram ]
[   28.570988] + /bin/sleep 0.1
[   28.672723] + slumber=18
[   28.672912] + [ 18 -gt 0 ]
[   28.673252] + [ ! -e /dev/ram ]
[   28.673579] + /bin/sleep 0.1
[   28.775280] + slumber=17
[   28.775468] + [ 17 -gt 0 ]
[   28.775805] + [ ! -e /dev/ram ]
[   28.776141] + /bin/sleep 0.1
[   28.877808] + slumber=16
[   28.877998] + [ 16 -gt 0 ]
[   28.878335] + [ ! -e /dev/ram ]
[   28.878678] + /bin/sleep 0.1
[   28.980349] + slumber=15
[   28.980538] + [ 15 -gt 0 ]
[   28.980876] + [ ! -e /dev/ram ]
[   28.981239] + /bin/sleep 0.1
[   29.082903] + slumber=14
[   29.083090] + [ 14 -gt 0 ]
[   29.083430] + [ ! -e /dev/ram ]
[   29.083769] + /bin/sleep 0.1
[   29.185442] + slumber=13
[   29.185633] + [ 13 -gt 0 ]
[   29.185977] + [ ! -e /dev/ram ]
[   29.186315] + /bin/sleep 0.1
[   29.287976] + slumber=12
[   29.288162] + [ 12 -gt 0 ]
[   29.288497] + [ ! -e /dev/ram ]
[   29.288835] + /bin/sleep 0.1
[   29.390511] + slumber=11
[   29.390698] + [ 11 -gt 0 ]
[   29.391066] + [ ! -e /dev/ram ]
[   29.391399] + /bin/sleep 0.1
[   29.493045] + slumber=10
[   29.493238] + [ 10 -gt 0 ]
[   29.493575] + [ ! -e /dev/ram ]
[   29.493914] + /bin/sleep 0.1
[   29.595577] + slumber=9
[   29.595763] + [ 9 -gt 0 ]
[   29.596103] + [ ! -e /dev/ram ]
[   29.596441] + /bin/sleep 0.1
[   29.698122] + slumber=8
[   29.698314] + [ 8 -gt 0 ]
[   29.698651] + [ ! -e /dev/ram ]
[   29.698993] + /bin/sleep 0.1
[   29.800691] + slumber=7
[   29.800882] + [ 7 -gt 0 ]
[   29.801242] + [ ! -e /dev/ram ]
[   29.801583] + /bin/sleep 0.1
[   29.903261] + slumber=6
[   29.903451] + [ 6 -gt 0 ]
[   29.903790] + [ ! -e /dev/ram ]
[   29.904129] + /bin/sleep 0.1
[   30.005795] + slumber=5
[   30.005982] + [ 5 -gt 0 ]
[   30.006319] + [ ! -e /dev/ram ]
[   30.006661] + /bin/sleep 0.1
[   30.108320] + slumber=4
[   30.108509] + [ 4 -gt 0 ]
[   30.108848] + [ ! -e /dev/ram ]
[   30.109185] + /bin/sleep 0.1
[   30.210854] + slumber=3
[   30.211062] + [ 3 -gt 0 ]
[   30.211404] + [ ! -e /dev/ram ]
[   30.211728] + /bin/sleep 0.1
[   30.313385] + slumber=2
[   30.313571] + [ 2 -gt 0 ]
[   30.313908] + [ ! -e /dev/ram ]
[   30.314244] + /bin/sleep 0.1
[   30.415913] + slumber=1
[   30.416102] + [ 1 -gt 0 ]
[   30.416442] + [ ! -e /dev/ram ]
[   30.416784] + /bin/sleep 0.1
[   30.518439] + slumber=0
[   30.518629] + [ 0 -gt 0 ]
[   30.518956] + break
[   30.519107] + [ 0 -gt 0 ]
[   30.519434] + log_end_msg 1
[   30.519612] + _log_msg done.\n
[   30.519795] + [ n = y ]
[   30.520108] + printf done.\n
[   30.520259] done.
[   30.520329] + [ ! -e /dev/ram ]
[   30.520671] + echo Gave up waiting for root device.  Common problems:
[   30.520824] Gave up waiting for root device.  Common problems:
[   30.520888] + echo  - Boot args (cat /proc/cmdline)
[   30.521056]  - Boot args (cat /proc/cmdline)
[   30.521129] + echo    - Check rootdelay= (did the system wait long enough?)
[   30.521281]    - Check rootdelay= (did the system wait long enough?)
[   30.521354] + echo    - Check root= (did the system wait for the right device?)
[   30.521508]    - Check root= (did the system wait for the right device?)
[   30.521574] + echo  - Missing modules (cat /proc/modules; ls /dev)
[   30.521720]  - Missing modules (cat /proc/modules; ls /dev)
[   30.521788] + panic ALERT!  /dev/ram does not exist.  Dropping to a shell!
[   30.522005] + command -v chvt
[   30.522243] + chvt 1
[   30.524437] + echo ALERT!  /dev/ram does not exist.  Dropping to a shell!
[   30.524650] ALERT!  /dev/ram does not exist.  Dropping to a shell!
[   30.524736] + [ -n  ]
[   30.525018] + modprobe -v i8042
[   30.528594] modprobe: module i8042 not found in modules.dep
[   30.528875] + true
[   30.529058] + modprobe -v atkbd
[   30.531966] + modprobe -v ehci-hcd
[   30.535580] modprobe: module ehci-hcd not found in modules.dep
[   30.535854] + true
[   30.536031] + modprobe -v uhci-hcd
[   30.539640] modprobe: module uhci-hcd not found in modules.dep
[   30.539916] + true
[   30.540100] + modprobe -v ohci-hcd
[   30.543704] modprobe: module ohci-hcd not found in modules.dep
[   30.543977] + true
[   30.544157] + modprobe -v usbhid
[   30.547765] modprobe: module usbhid not found in modules.dep
[   30.548045] + true
[   30.548283] + REASON=ALERT!  /dev/ram does not exist.  Dropping to a shell! PS1=(initramfs)  /bin/sh -i



-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.4-trunk-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash


Reply to: