nouveau error with gtx 560
Hello I use debian whezzy with kernel 3.2.19
I have a Zotac GTX 560 mit 2 GB VRam installed an the kernel brings this
log and freeze. Can oyu help me ? This is the log from dmseg from fist
[drm] line
[ 8.379902] [drm] Initialized drm 1.1.0 20060810
[ 8.393686] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 8.393730] snd_hda_intel 0000:00:1b.0: irq 71 for MSI/MSI-X
[ 8.393748] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 8.403776] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.416745] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver
chip loaded successfully
[ 8.421620] flexcop-pci: will use the HW PID filter.
[ 8.421622] flexcop-pci: card revision 2
[ 8.421627] b2c2_flexcop_pci 0000:07:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 8.433956] DVB: registering new adapter (FlexCop Digital TV device)
[ 8.436032] b2c2-flexcop: MAC address = 00:d0:d7:13:9d:40
[ 8.472717] b2c2-flexcop: ISL6421 successfully attached
[ 8.553100] MXM: GUID detected in BIOS
[ 8.553132] nouveau 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 8.553136] nouveau 0000:02:00.0: setting latency timer to 64
[ 8.553977] [drm] nouveau 0000:02:00.0: Detected an NVc0 generation card
(0x0ce080a1)
[ 8.559044] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image
from PRAMIN
[ 8.574299] ITD1000: successfully identified (ID: 0)
[ 8.600796] b2c2-flexcop: ITD1000 successfully attached
[ 8.600798] b2c2-flexcop: found 'Samsung S5H1420/PnpNetwork PN1010 DVB-S' .
[ 8.600801] DVB: registering adapter 0 frontend 0 (Samsung
S5H1420/PnpNetwork PN1010 DVB-S)...
[ 8.600911] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev
2.7a/u' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 8.664212] [drm] nouveau 0000:02:00.0: ... appears to be valid
[ 8.664215] [drm] nouveau 0000:02:00.0: BIT BIOS found
[ 8.664217] [drm] nouveau 0000:02:00.0: Bios version 70.24.2d.00
[ 8.664219] [drm] nouveau 0000:02:00.0: TMDS table version 2.0
[ 8.664220] [drm] nouveau 0000:02:00.0: Found Display Configuration
Block version 4.0
[ 8.664223] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 04000310 00000000
[ 8.664224] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000312 00020030
[ 8.664226] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 02011380 00000000
[ 8.664228] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 08011382 00020030
[ 8.664229] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 02022362 00020010
[ 8.664231] [drm] nouveau 0000:02:00.0: Raw DCB entry 5: 040333b6 0f200010
[ 8.664233] [drm] nouveau 0000:02:00.0: Raw DCB entry 6: 04033372 00020010
[ 8.664235] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5
16 4
[ 8.664237] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0
tag 0x07
[ 8.664239] [drm] nouveau 0000:02:00.0: 1: 0x00010130: type 0x30 idx 1
tag 0x51
[ 8.664241] [drm] nouveau 0000:02:00.0: 2: 0x00002261: type 0x61 idx 2
tag 0x08
[ 8.664243] [drm] nouveau 0000:02:00.0: 3: 0x00220346: type 0x46 idx 3
tag 0x52
[ 8.664247] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at
offset 0x6EB0
[ 8.684210] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at
offset 0x75B0
[ 8.688883] [drm] nouveau 0000:02:00.0: unknown i2c port 51
[ 8.688938] [drm] nouveau 0000:02:00.0: 0x8A2D: Failed parsing init
table opcode: INIT_I2C_LONG_IF -19
[ 8.689002] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at
offset 0x8C88
[ 8.689004] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at
offset 0x8C92
[ 8.689060] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at
offset 0x8E71
[ 8.689062] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at
offset 0x8ED6
[ 8.708880] [drm] nouveau 0000:02:00.0: 0x8ED6: Condition still not met
after 20ms, skipping following opcodes
[ 8.708945] [drm] nouveau 0000:02:00.0: unknown i2c port 51
[ 8.709000] [drm] nouveau 0000:02:00.0: 3 available performance level(s)
[ 8.709003] [drm] nouveau 0000:02:00.0: 0: core 50MHz shader 101MHz
memory 135MHz timing 5 voltage 950mV
[ 8.709007] [drm] nouveau 0000:02:00.0: 1: core 405MHz shader 810MHz
memory 324MHz timing 4 voltage 950mV
[ 8.709011] [drm] nouveau 0000:02:00.0: 3: core 820MHz shader 1640MHz
memory 2004MHz timing 3 voltage 962mV-1050mV
[ 8.709095] [drm] nouveau 0000:02:00.0: c: core 50MHz shader 101MHz
memory 135MHz voltage 950mV
[ 8.717909] [TTM] Zone kernel: Available graphics memory: 3060906 kiB.
[ 8.717912] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 8.717915] [TTM] Initializing pool allocator.
[ 8.717928] [drm] nouveau 0000:02:00.0: Detected 2048MiB VRAM
[ 8.717935] mtrr: type mismatch for d8000000,8000000 old: write-back
new: write-combining
[ 8.717949] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture)
[ 8.816926] hda_codec: AD1989B: BIOS auto-probing.
[ 8.816986] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input5
[ 8.831073] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.831075] [drm] No driver support for vblank timestamp query.
[ 8.831088] [drm] nouveau 0000:02:00.0: unknown i2c port 49
[ 8.831147] [drm] nouveau 0000:02:00.0: unknown i2c port 49
[ 8.875798] [drm] nouveau 0000:02:00.0: unknown i2c port 56
[ 8.875856] [drm] nouveau 0000:02:00.0: unknown i2c port 56
[ 8.920502] [drm] nouveau 0000:02:00.0: unknown i2c port 54
[ 8.920598] [drm] nouveau 0000:02:00.0: unknown i2c port 55
[ 8.920653] No connectors reported connected with modes
[ 8.920655] [drm] Cannot find any crtc or sizes - going 1024x768
[ 8.921932] [drm] nouveau 0000:02:00.0: allocated 1024x768 fb: 0x1c0000,
bo ffff8801b460c000
[ 8.922109] fbcon: nouveaufb (fb0) is primary device
[ 8.932104] Console: switching to colour frame buffer device 128x48
[ 8.936535] fb0: nouveaufb frame buffer device
[ 8.936536] drm: registered panic notifier
[ 8.936541] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0
on minor 0
[ 8.936621] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 34 (level, low)
-> IRQ 34
[ 8.936625] hda_intel: Disabling MSI
[ 8.936674] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 9.756021] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.787973] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.819929] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.851889] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 9.867958] input: HDA NVidia HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input6
[ 9.868156] input: HDA NVidia HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input7
[ 9.868301] input: HDA NVidia HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input8
[ 9.868422] input: HDA NVidia HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9
[ 10.850198] Adding 12564476k swap on /dev/sda5. Priority:-1 extents:1
across:12564476k
[ 10.863894] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.016205] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.146879] loop: module loaded
[ 11.999430] RPC: Registered named UNIX socket transport module.
[ 11.999432] RPC: Registered udp transport module.
[ 11.999433] RPC: Registered tcp transport module.
[ 11.999434] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.062490] FS-Cache: Loaded
[ 12.124575] FS-Cache: Netfs 'nfs' registered for caching
[ 12.133297] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.164276] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input10
[ 12.509739] sky2 0000:05:00.0: eth0: enabling interface
[ 12.510333] ADDRCONF(NETDEV_UP): eth0: link is not ready
Reply to: