[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#605468: marked as done (beta1 installer, upgrade to grub2, doesn't show other boot options on reboot)

Your message dated Sun, 5 Dec 2010 15:04:30 +0100
with message-id <20101205140430.GH5678@mykerinos.kheops.frmug.org>
and subject line Re: Bug#605468: beta1 installer, upgrade to grub2,  doesn't show other boot options on reboot
has caused the Debian Bug report #605468,
regarding beta1 installer, upgrade to grub2,  doesn't show other boot options on reboot
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
605468: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=605468
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 

Package: installation-reports

Boot method: <Debian Installer
beta1 netinst CD>
Image version:
<http://cdimage.debian.org/cdimage/squeeze_di_beta1/amd64/iso-cd/debian-squeeze-di-beta1-amd64-netinst.iso>
Date: <2010-11-24>

Machine: <Acer Extensa 4420
Laptop>
Processor: AMD Athlon 64 X2 Dual-Core Processor TK-57
Memory: 4GB
Partitions: 
<Filesystem    Type  
1K-blocks      Used Available Use% Mounted on
/dev/sda6     ext4   
11187352   5174932   5444124  49% /
tmpfs        tmpfs    
1901276         0   1901276   0% /lib/init/rw
udev         tmpfs    
1896560       240   1896320   1% /dev
tmpfs        tmpfs    
1901276         0   1901276   0% /dev/shm>

Output of lspci
-knn (or lspci -nn):
00:00.0 Host bridge [0600]: ATI Technologies Inc
RS690 Host Bridge [1002:7910]
    Subsystem: Acer Incorporated [ALI]
Device [1025:0123]
00:01.0 PCI bridge [0604]: ATI Technologies Inc
RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
00:04.0 PCI bridge
[0604]: ATI Technologies Inc Device [1002:7914]
    Kernel driver in
use: pcieport
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS690
PCI to PCI Bridge (PCI Express Port 1) [1002:7915]
    Kernel driver
in use: pcieport
00:06.0 PCI bridge [0604]: ATI Technologies Inc
RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916]
    Kernel
driver in use: pcieport
00:12.0 SATA controller [0106]: ATI
Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
    Subsystem:
Acer Incorporated [ALI] Device [1025:0123]
    Kernel driver in use:
ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB
(OHCI0) [1002:4387]
    Subsystem: Acer Incorporated [ALI] Device
[1025:0123]
    Kernel driver in use: ohci_hcd
00:13.1 USB
Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
    Subsystem: Acer Incorporated [ALI] Device [1025:0123]
   
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI
Technologies Inc SB600 USB (OHCI2) [1002:4389]
    Subsystem: Acer
Incorporated [ALI] Device [1025:0123]
    Kernel driver in use:
ohci_hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600
USB (OHCI3) [1002:438a]
    Subsystem: Acer Incorporated [ALI] Device
[1025:0123]
    Kernel driver in use: ohci_hcd
00:13.4 USB
Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
    Subsystem: Acer Incorporated [ALI] Device [1025:0123]
   
Kernel driver in use: ohci_hcd
00:13.5 USB Controller [0c03]: ATI
Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
   
Subsystem: Acer Incorporated [ALI] Device [1025:0123]
    Kernel
driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc
SBx00 SMBus Controller [1002:4385] (rev 14)
    Subsystem: Acer
Incorporated [ALI] Device [1025:0123]
    Kernel driver in use:
piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600
IDE [1002:438c]
    Subsystem: Acer Incorporated [ALI] Device
[1025:0123]
    Kernel driver in use: pata_atiixp
00:14.2 Audio
device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA)
[1002:4383]
    Subsystem: Acer Incorporated [ALI] Device
[1025:0123]
    Kernel driver in use: HDA Intel
00:14.3 ISA
bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
    Subsystem: Acer Incorporated [ALI] Device [1025:0123]
00:14.4
PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD]
K8 [Athlon64/Opteron] HyperTransport Technology Configuration
[1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD]
K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge
[0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
[1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD]
K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
    Kernel
driver in use: k8temp
01:05.0 VGA compatible controller [0300]: ATI
Technologies Inc RS690M [Radeon X1200 Series] [1002:791f]
   
Subsystem: Acer Incorporated [ALI] Device [1025:0123]
    Kernel
driver in use: radeon
02:00.0 Ethernet controller [0200]: Marvell
Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller
[11ab:436b] (rev 15)
    Subsystem: Acer Incorporated [ALI] Device
[1025:0123]
    Kernel driver in use: sky2
05:00.0 Network
controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY
[14e4:4315] (rev 01)
    Subsystem: Foxconn International, Inc.
Device [105b:e003]
    Kernel driver in use: b43-pci-bridge
0b:06.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711SP1 Memory CardBus
Controller [1217:7136] (rev 01)
    Subsystem: Acer Incorporated
[ALI] Device [1025:0123]
    Kernel driver in use: yenta_cardbus
0b:06.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD
Controller [1217:7120] (rev 02)
    Subsystem: Acer Incorporated
[ALI] Device [1025:0123]
    Kernel driver in use: sdhci-pci
0b:06.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD
Controller [1217:7130] (rev 01)
    Subsystem: Acer Incorporated
[ALI] Device [1025:0123]
0b:06.4 FireWire (IEEE 1394) [0c00]: O2
Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02)
    Subsystem:
Acer Incorporated [ALI] Device [1025:0123]
    Kernel driver in use:
firewire_ohci

Base System Installation Checklist:
[O] =
OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load
installer modules: [O]
Detect hard drives:     [O]
Partition
hard drives:  [O]
Install base system:    [O]
Clock/timezone
setup:   [O]
User/password setup:    [O]
Install tasks:         
[O]
Install boot loader:    [E]
Overall install:        [O]

Comments/Problems: grub2 Windows boot options were not available
upon reboot. I had to manually run grub-update to refresh the boot
options.

<I used the beta1 debian installer, booting
directly from the net-install CD. This install is on sda6. Other
partitions on my machine include a Windows Recovery partition, a Windows
partition, and a Debian 5.0 partition. This represents a clean install on
a partition which previously contained a second, extra Debian 5.0
partition. During the install process, I upgraded from grub to grub2. The
installer itself recognized my partitions, but upon restart those options
weren't made available by the grub2 bootloader. In order to fix the
problem, I performed command 'grub-update'.>

--- End Message ---
--- Begin Message --- 
> Comments/Problems: grub2 Windows boot options were not available
> upon reboot. I had to manually run grub-update to refresh the boot
> options.
> 
> <I used the beta1 debian installer, booting
> directly from the net-install CD. This install is on sda6. Other
> partitions on my machine include a Windows Recovery partition, a Windows
> partition, and a Debian 5.0 partition. This represents a clean install on
> a partition which previously contained a second, extra Debian 5.0
> partition. During the install process, I upgraded from grub to grub2. The
> installer itself recognized my partitions, but upon restart those options
> weren't made available by the grub2 bootloader. In order to fix the
> problem, I performed command 'grub-update'.>

That issue is solved in the soon-to-come beta2.

Given that your installation was a complete success, I do as
usual with reports for successful installations: I close the bug..:-)

This does not of course mean you weren't right to report. Knowing the
installations are correct is important for the d-i team.

Many thanks for your time testing the Debian Installer and reporting
your results. Have fun with your new Debian system!

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: