Bug#605689: installation-reports - kernel module crash when configuring bridge
Package: installation-reports
Boot method: CD
Image version: debian-squeeze-di-beta1-amd64-netinst
Date: 01/12/2010
Machine: Dell OptiPlex 330
Processor: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz
Memory: 3GB
Partitions:
/dev/mapper/bridge-root ext4 234130312 1014996 221222172 1% /
tmpfs tmpfs 1542012 0 1542012 0% /lib/init/rw
udev tmpfs 1536836 140 1536696 1% /dev
tmpfs tmpfs 1542012 0 1542012 0% /dev/shm
/dev/sda1 ext2 233191 15614 205136 8% /boot
Output of lspci -knn (or lspci -nn):
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02)
Subsystem: Dell Device [1028:0220]
00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 02)
Subsystem: Dell Device [1028:0220]
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787 Gigabit Ethernet PCI Express [14e4:169b] (rev 02)
Subsystem: Dell Device [1028:0220]
Kernel driver in use: tg3
03:01.0 Ethernet controller [0200]: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01] (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01]
Kernel driver in use: skge
03:02.0 Ethernet controller [0200]: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01] (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) [1186:4b01]
Kernel driver in use: skge
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
I've tried to configure a bridge between the devices 03:01.0 and 03:02.0, but I get an kernel module erro in dmesg:
/etc/network/interfaces
# The loopback network interface
auto lo br0
iface lo inet loopback
# The primary network interface
#allow-hotplug eth0
iface br0 inet static
address 10.10.10.10
netmask 255.255.252.0
gateway 10.0.10.2
bridge_ports eth0 eth1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers x.x.x.x y.y.y.y
dns-search domain.local
[ 39.816081] ------------[ cut here ]------------
[ 39.816095] WARNING: at /build/buildd-linux-2.6_2.6.32-28-amd64-EUJiNq/linux-2.6-2.6.32/debian/build/source_amd64_none/net/sched/sch_generic.c:261 dev_watchdog+0xe2/0x194()
[ 39.816101] Hardware name: OptiPlex 330
[ 39.816104] NETDEV WATCHDOG: eth1 (skge): transmit queue 0 timed out
[ 39.816108] Modules linked in: bridge stp ext2 loop i915 drm_kms_helper drm i2c_algo_bit video output snd_pcm snd_timer i2c_i801 snd soundcore i2c_core rng_core snd_page_alloc parport_pc processor parport button dcdbas evdev joydev pcspkr psmouse serio_raw ext4 mbcache jbd2 crc16 usbhid hid dm_mod sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd tg3 ata_piix libphy skge thermal ehci_hcd thermal_sys libata scsi_mod usbcore nls_base [last unloaded: scsi_wait_scan]
[ 39.816177] Pid: 0, comm: swapper Not tainted 2.6.32-5-amd64 #1
[ 39.816180] Call Trace:
[ 39.816183] <IRQ> [<ffffffff81261c12>] ? dev_watchdog+0xe2/0x194
[ 39.816193] [<ffffffff81261c12>] ? dev_watchdog+0xe2/0x194
[ 39.816200] [<ffffffff8104dd6c>] ? warn_slowpath_common+0x77/0xa3
[ 39.816206] [<ffffffff81261b30>] ? dev_watchdog+0x0/0x194
[ 39.816211] [<ffffffff8104ddf4>] ? warn_slowpath_fmt+0x51/0x59
[ 39.816219] [<ffffffff8105a588>] ? lock_timer_base+0x26/0x4b
[ 39.816225] [<ffffffff8105ab06>] ? __mod_timer+0x141/0x153
[ 39.816230] [<ffffffff81261b04>] ? netif_tx_lock+0x3d/0x69
[ 39.816240] [<ffffffff8124c97c>] ? netdev_drivername+0x3b/0x40
[ 39.816243] [<ffffffff81261c12>] ? dev_watchdog+0xe2/0x194
[ 39.816246] [<ffffffff8103f9bb>] ? __wake_up+0x30/0x44
[ 39.816249] [<ffffffff8105a337>] ? run_timer_softirq+0x1c9/0x268
[ 39.816253] [<ffffffff81053aaf>] ? __do_softirq+0xdd/0x1a2
[ 39.816257] [<ffffffff8102419a>] ? lapic_next_event+0x18/0x1d
[ 39.816262] [<ffffffff81011cac>] ? call_softirq+0x1c/0x30
[ 39.816264] [<ffffffff8101322b>] ? do_softirq+0x3f/0x7c
[ 39.816267] [<ffffffff8105391e>] ? irq_exit+0x36/0x76
[ 39.816270] [<ffffffff81024c68>] ? smp_apic_timer_interrupt+0x87/0x95
[ 39.816273] [<ffffffff81011673>] ? apic_timer_interrupt+0x13/0x20
[ 39.816275] <EOI> [<ffffffff8101731c>] ? mwait_idle+0x72/0x7d
[ 39.816280] [<ffffffff810172cc>] ? mwait_idle+0x22/0x7d
[ 39.816284] [<ffffffff8100feb1>] ? cpu_idle+0xa2/0xda
[ 39.816288] [<ffffffff814f3140>] ? early_idt_handler+0x0/0x71
[ 39.816291] [<ffffffff814f3cd1>] ? start_kernel+0x3dc/0x3e8
[ 39.816295] [<ffffffff814f33b7>] ? x86_64_start_kernel+0xf9/0x106
[ 39.816297] ---[ end trace d74831a900d9556f ]---
Reply to: