Bug#279267: marked as done (installation report)
Your message dated Wed, 08 Sep 2010 03:57:45 +0000
with message-id <E1OtBn7-0004ES-Fk@ravel.debian.org>
and subject line Closing old installation report #279267
has caused the Debian Bug report #279267,
regarding installation report
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact email@example.com
Debian Bug Tracking System
Contact firstname.lastname@example.org with problems
--- Begin Message ---
Debian-installer-version: 28 October '04, sarge-i386-netinst
uname -a: Linux chaim 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux (Although please note that I installed first the 2.4 kernel, and some problems are because of that.)
Date: 28 October '04
Method: Burned the netinst disc, run it, and downloaded packages using pppoe.
Machine: Intel motherboard
Processor: Pentium 4, 3.0 GHz
Memory: 512 MB
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 4865 39078081 7 HPFS/NTFS
/dev/hda2 4866 9537 37527840 83 Linux
/dev/hda3 9538 9729 1542240 f W95 Ext'd (LBA)
/dev/hda5 9538 9729 1542208+ 82 Linux swap
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
0000:02:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev 01)
0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:01.0 0604: 8086:2571 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0300: 10de:0322 (rev a1)
0000:02:08.0 0200: 8086:1050 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Please say in the template how to get the partition table, I had to search google for that.
I remember that once (maybe on mandrake) my windows partition was added to fstab automatically. That would be nice here too.
The installation route was only designed for regular modem internet connections. I had to manually change to a different terminal, and there run pppoeconf.
It didn't setup well my sound card: I had to afterwards install alsa (and alsa modules for 2.4 kernel), and then it worked.
Thanks! I really like debian!
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---