--- Begin Message ---
Package: installation-reports
Debian-installer-version: Sarge Installer Rc2
uname -a: Linux laptop 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i686 GNU/Linux
Date: About october 10
Method: Simple CD/Net install over Switch/Zurich/switzerland
Machine: Sony Vayo pcg-f409 Laptop
Processor: Pentium 3
Memory: 192
Root Device: Ide Toshiba HD
Root Size/partition table: <Feel free to paste the full partition
table, with notes on which partitions are mounted where.>
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
0000:00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev 02)
0000:00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio Controller] (rev 02)
0000:00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
0000:00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
0000:01:00.0 VGA compatible controller: Neomagic Corporation NM2380 [MagicMedia 256XL+] (rev 10)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
Hello,
first of all, thank you all @ the debian family for this fantastic work.
Im not a big computer guru but here a description of my problems, resolved and not.
I'm using a pcmcia network adapter and was reconised, but i allways had to do a "dhclient" so that my card (eth1)
was configured, eth0 is used by the firewire port. Now i replace eth0 with eth1 in /etc/network/interfaces by
hand (eth0 was original state)
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# This is a list of hotpluggable network interfaces.
# They will be activated automatically by the hotplug subsystem.
mapping hotplug
script grep
map eth1
# The primary network interface
iface eth1 inet dhcp
I also have a problem with alsa on my laptop and on a second computer, after the installation, if i click on
the sound simbol on the gnome taskbar i got an error. But cant help you more with this case.
i stay tuned if you need more infos.
Rogi
lsmod:
Module Size Used by
apm 19948 1
rfcomm 34460 0
l2cap 23172 5 rfcomm
bluetooth 44036 4 rfcomm,l2cap
ipv6 229764 14
irtty_sir 8320 0
sir_dev 18092 1 irtty_sir
irda 167360 2 irtty_sir,sir_dev
crc_ccitt 2432 1 irda
af_packet 20872 2
lp 10408 0
pcnet_cs 18356 1
8390 9856 1 pcnet_cs
crc32 4608 1 8390
ds 17796 5 pcnet_cs
snd_ymfpci 58180 0
snd_ac97_codec 59268 1 snd_ymfpci
snd_pcm_oss 48168 0
snd_mixer_oss 16640 1 snd_pcm_oss
snd_pcm 85384 2 snd_ymfpci,snd_pcm_oss
eth1394 19976 0
snd_opl3_lib 9728 1 snd_ymfpci
snd_timer 23172 3 snd_ymfpci,snd_pcm,snd_opl3_lib
snd_hwdep 9092 1 snd_opl3_lib
snd_page_alloc 11144 2 snd_ymfpci,snd_pcm
gameport 4736 1 snd_ymfpci
snd_mpu401_uart 7296 1 snd_ymfpci
snd_rawmidi 23204 1 snd_mpu401_uart
snd_seq_device 7944 2 snd_opl3_lib,snd_rawmidi
snd 50660 11 snd_ymfpci,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device
ohci1394 32004 0
ieee1394 100408 2 eth1394,ohci1394
uhci_hcd 29328 0
usbcore 104164 3 uhci_hcd
pci_hotplug 30640 0
intel_agp 20512 1
tsdev 7168 0
mousedev 9996 2
psmouse 17800 0
parport_pc 31936 1
parport 37320 2 lp,parport_pc
floppy 54992 0
pcspkr 3816 0
evdev 9088 0
ymfpci 48512 2
ac97_codec 16908 1 ymfpci
soundcore 9824 4 snd,ymfpci
yenta_socket 19200 1
pcmcia_core 63028 3 pcnet_cs,ds,yenta_socket
agpgart 31784 1 intel_agp
capability 4872 0
commoncap 7168 1 capability
ide_cd 38176 0
cdrom 35740 1 ide_cd
rtc 12088 0
ext3 109544 2
jbd 54552 1 ext3
ide_generic 1664 0
piix 12448 1
ide_disk 16768 4
ide_core 125156 4 ide_cd,ide_generic,piix,ide_disk
unix 25908 382
font 8576 0
vesafb 6688 0
cfbcopyarea 3840 1 vesafb
cfbimgblt 3200 1 vesafb
cfbfillrect 3712 1 vesafb
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---