--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: RC1 (i386 netinst)
uname -a: Linux frobnitz 2.6.8-2-amd64-k8 #1 Thu Sep 23 15:25:58 PDT 2004 x86_64 GNU/Linux
Date: 23 Sept 2004
Method: Booted and installed from CD (with linux26 boot)
Machine: Alienware amd64
Processor: "AMD Athlon(tm) 64 Processor 3500+" stepping 0, 2200 MHz clock
Memory: 1GB
Root Device: Seagate Barracuda 160GB SCSI, using sata_via
Root Size/partition table:
major minor #blocks name
8 0 156290904 sda
8 1 40957686 sda1 [ntfs WinXP installation]
8 2 1951897 sda2 [swap]
8 3 113378737 sda3 [/]
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0282
0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1282
0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2282
0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
0000:00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:00:0d.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:00:0d.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
0000:00:0d.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900XT] (rev a1)
lspci -n
0000:00:00.0 0600: 1106:0282
0000:00:00.1 0600: 1106:1282
0000:00:00.2 0600: 1106:2282
0000:00:00.3 0600: 1106:3282
0000:00:00.4 0600: 1106:4282
0000:00:00.7 0600: 1106:7282
0000:00:01.0 0604: 1106:b188
0000:00:07.0 0c00: 1106:3044 (rev 80)
0000:00:0a.0 0200: 11ab:4320 (rev 13)
0000:00:0d.0 0401: 1102:0004 (rev 04)
0000:00:0d.1 0980: 1102:7003 (rev 04)
0000:00:0d.2 0c00: 1102:4001 (rev 04)
0000:00:0f.0 0104: 1106:3149 (rev 80)
0000:00:0f.1 0101: 1106:0571 (rev 06)
0000:00:10.0 0c03: 1106:3038 (rev 81)
0000:00:10.1 0c03: 1106:3038 (rev 81)
0000:00:10.2 0c03: 1106:3038 (rev 81)
0000:00:10.3 0c03: 1106:3038 (rev 81)
0000:00:10.4 0c03: 1106:3104 (rev 86)
0000:00:11.0 0601: 1106:3227
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0332 (rev a1)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
When I selected the option for automatic partitioning of free space,
it would have been nice to be able to adjust the size of swap space.
Other than that, and the pause when it was trying to find DHCP over my
pppoe link, everything worked well. (Then there was the base-config
issue with pppoe, but I know that's a different package.)
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---