--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: INSTALL REPORT
- From: "S. Anthony Sequeira" <tony@sequeira.com>
- Date: Mon, 30 Aug 2004 12:49:21 +0100
- Message-id: <1093866561.19938.3.camel@aurora.sequestor.lan>
Package: installation-reports
INSTALL REPORT
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso Sun Aug 29 14:29 BST 2004
uname -a: Linux fireball.sequestor.lan 2.6.7-1-386 #1 Thu Jul 8 05:08:04
EDT 2004 i686 GNU/Linux
Date: Sun Aug 29 19:00 BST 2004
Method: NETINST CDROM Debian UK ftp mirror No proxy
Machine: IBM 300GL
Processor: Intel Pentium III (Katmai) stepping 03
Memory: 384MB
Root Device: IDE
Root Size/partition table:
Disk /dev/hda: 16351 cylinders, 16 heads, 63 sectors/track
Units = cylinders of 516096 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 0+ 247 248- 124960+ 83
Linux /
/dev/hda2 248 1140 893 450072 82 Linux swap
/dev/hda3 1141 1233 93 46872 83
Linux /boot
/dev/hda4 1234 16350 15117 7618968 8e Linux LVM
ACTIVE '/dev/vg/home' [512.00 MB]
inherit /home
ACTIVE '/dev/vg/tmp' [288.00 MB]
inherit /tmp
ACTIVE '/dev/vg/usr' [3.00 GB]
inherit /usr
ACTIVE '/dev/vg/var' [1.40 GB]
inherit /var
Output of lspci and lspci -n:
lspci
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03)
0000:00:02.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:02.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:02.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev
01)
0000:00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:10.0 Token ring network controller: IBM 16/4 Token ring UTP/STP
controller (rev 66)
0000:00:14.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 78)
0000:01:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01)
lspci -n
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:02.0 0601: 8086:7110 (rev 02)
0000:00:02.1 0101: 8086:7111 (rev 01)
0000:00:02.2 0c03: 8086:7112 (rev 01)
0000:00:02.3 0680: 8086:7113 (rev 02)
0000:00:10.0 0201: 1014:003e (rev 66)
0000:00:14.0 0200: 10b7:9200 (rev 78)
0000:01:01.0 0300: 5333:8904 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Disable DHCP boot paramater didn't work, or I misspelt it.
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I wanted a fixed IP address, but the installer went ahead with DHCP
anyway. deslect seems to get itself in a knot with gcc, 3.3 and 3.4,
eventually resolved.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
The initial screen looks good, then it's back to the basic, much loved
installer.
Install logs and other status info is available in
/var/log/debian-installer/.
Yes
oNCE you have filled out this report, mail it to submit@bugs.debian.org.
--
The only difference in the game of love over the last few thousand years
is that they've changed trumps from clubs to diamonds.
-- The Indianapolis Star
--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
Installer.
- indications in the installation report give the feeling that
the reported problem waslying in another software, unrelated to
D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful
The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet.
In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.
You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.
If some problems are found, please report them with a new bug sent
against installation-reports.
Many thanks for your understanding and your help improving Debian,
past and present.
--- End Message ---