[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#266288: marked as done (Install, Ok apart from german language problems)

Your message dated Wed, 08 Sep 2010 03:57:35 +0000
with message-id <E1OtBmx-0003s8-2m@ravel.debian.org>
and subject line Closing old installation report #266288
has caused the Debian Bug report #266288,
regarding Install, Ok apart from german language problems
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
266288: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=266288
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

INSTALL REPORT

Debian-installer-version: 17.08.2004,
  http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a: Linux PC03-153 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux
Date: Tue Aug 17 13:39:28 CEST 2004
Method: Install using 2.4 kernel, using RC1 boot-CD, install via 
  ftp2.de.debian.org, not proxied

Machine: Dell OptiPlex GX270N
Processor: Intel(R) Pentium(R) 4 CPU 2.60GHz
Memory: 512MB
Root Device: P-ATA IDE, /dev/hda3
Root Size/partition table: 
# partition table of /dev/hda
unit: sectors

/dev/hda1 : start=       63, size=    48132, Id=83		unused
/dev/hda2 : start=    48195, size= 39086145, Id= 7		WinXP Prof
/dev/hda3 : start= 39134340, size= 38025855, Id=83, bootable	/
/dev/hda4 : start= 77160195, size=   996030, Id= f
/dev/hda5 : start= 77160258, size=   995967, Id=82		Swap

Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
0000:01:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
# lspci -n
0000:00:00.0 0600: 8086:2570 (rev 02)
0000:00:02.0 0300: 8086:2572 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:0c.0 0200: 8086:100e (rev 02)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [ ]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:

Hi, this install worked like a charm. At least in the 2.4 kernel.

If booted with the linux26 image, I can not switch to the console. The german
umlaut characters don't work then (in the installer. If you enter one, it is not displayed
and neither is any character after that...)

If booted with the linux24 image, the installer works (apart from some status messages
with defective umlauts right after choosing these settings). But in the console (Alt-F2)
the umlauts are displayed defective. I didn't try if this is only a question of the display
or really of wrong characters ending up in files...

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

--- End Message ---
--- Begin Message --- 
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---
Reply to: