--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: installation-report: Debian on a IBM RS/6000
- From: Bjoern.Bosselmann@t-online.de (Bjoern Bosselmann)
- Date: Sun, 26 Mar 2006 14:41:34 +0200
- Message-id: <20060326124134.2415.68669.reportbug@rs6000.bosselmann.lan>
Package: installation-reports
Version: 2.14
Severity: important
-- Package-specific info:
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/etch_di_beta2/powerpc/iso-cd/debian-testing-powerpc-netinst.iso (Etch Beta 2)
Date: 25. March 2006
Machine: IBM RS/6000 43P Model 150
Partitions:
Output of "cfdisk -P s /dev/sda":
First Last
# Type Sector Sector Offset Length Filesystem Type (ID) Flag
-- ------- ----------- ----------- ------ ----------- -------------------- ----
1 Primary 0 14335 32 14336 PPC PReP Boot (41) None
2 Primary 14336 16615423 0 16601088 Linux (83) None
3 Primary 16615424 17772543 0 1157120 Linux swap / So (82) None
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [E]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Installed system ok: [E]
Comments/Problems:
Initial boot:
Autoboot with the original install-cd isn't possible, RS6000 reboots immediately.
Boot yaboot on the OF-Prompt aborts with something like "Uncaught Firmware Exception".
I seen, that the OpenSuSE Rescue System (on the first CD) can boot with a special
version of yaboot. So I replaced /install/yaboot of the netinst-cd with yaboot.ibm
from the SuSE CD (yaboot 1.3.13.SuSE). After this modification the Debian-CD autoboots
without problems.
Install boot loader:
Install of yaboot failed. In the log there is something like "'magicboot' scripts
cannot be used with fstype=raw", so I comment out the "magicboot" line (and the
"device" line, because it is empty and useless). After manually run "mkofboot"
and "ybin -v" yaboot was installed properly, so autoboot is possible.
Installed system ok:
After reboot Debian stops with a kernel-panic, because it cannot found the root
partition. The drivers of the SCSI-Controller was not loaded (problems with initrd?).
I installed a self-compiled Linux Kernel (from linux-source-2.6.15) with compiled-in
drivers for the most important devices to solve this.
Now I have a working Debian system on the RS6000.
The "PReP Boot Patition" was created with der SuSE Rescue CD. The two other
partitions was created with the installer.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060304)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux rs6000 2.6.15-1-powerpc #2 Tue Feb 21 18:37:40 UTC 2006 ppc unknown
lspci -v -t: -[00]-+-00.0 Motorola MPC106 [Grackle]
lspci -v -t: +-0b.0 Symphony Labs W83C553
lspci -v -t: +-0b.1 Symphony Labs SL82c105
lspci -v -t: +-0c.0 Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
lspci -v -t: +-0d.0 IBM MPIC interrupt controller
lspci -v -t: +-10.0 LSI Logic / Symbios Logic 53c875
lspci -v -t: +-12.0 AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz]
lspci -v -t: +-16.0 IBM 256-bit Graphics Rasterizer [Fire GL1]
lspci -v -t: \-17.0-[01]----01.0 IBM 16/4 Token ring UTP/STP controller
lspci -n: 0000:00:00.0 0600: 1057:0002 (rev 40)
lspci -n: 0000:00:0b.0 0601: 10ad:0565 (rev 10)
lspci -n: 0000:00:0b.1 0101: 10ad:0105 (rev 05)
lspci -n: 0000:00:0c.0 0200: 1022:2000 (rev 26)
lspci -n: 0000:00:0d.0 ff00: 1014:0046
lspci -n: 0000:00:10.0 0100: 1000:000f (rev 04)
lspci -n: 0000:00:12.0 0280: 1244:0a00 (rev 02)
lspci -n: 0000:00:16.0 0300: 1014:00b7 (rev 02)
lspci -n: 0000:00:17.0 0604: 1014:0022 (rev 01)
lspci -n: 0000:01:01.0 0201: 1014:003e (rev 68)
lspci -v: 0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v:
lspci -v: 0000:00:0b.0 ISA bridge: Symphony Labs W83C553 (rev 10)
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v:
lspci -v: 0000:00:0b.1 IDE interface: Symphony Labs SL82c105 (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
lspci -v: Flags: bus master, medium devsel, latency 16, IRQ 255
lspci -v: I/O ports at febfd400 [size=8]
lspci -v: I/O ports at febfcc00 [size=4]
lspci -v: I/O ports at febfd800 [size=8]
lspci -v: I/O ports at febfd000 [size=4]
lspci -v: I/O ports at febfdc00 [size=16]
lspci -v: I/O ports at febfe000 [size=16]
lspci -v:
lspci -v: 0000:00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
lspci -v: Flags: bus master, medium devsel, latency 18, IRQ 22
lspci -v: I/O ports at febfe400 [size=32]
lspci -v: Memory at f9cfc000 (32-bit, non-prefetchable) [size=32]
lspci -v: Expansion ROM at f9f00000 [disabled] [size=1M]
lspci -v:
lspci -v: 0000:00:0d.0 ff00: IBM MPIC interrupt controller
lspci -v: Flags: medium devsel
lspci -v: Memory at f9e80000 (32-bit, non-prefetchable) [size=256K]
lspci -v:
lspci -v: 0000:00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
lspci -v: Flags: bus master, medium devsel, latency 18, IRQ 23
lspci -v: I/O ports at febfec00 [size=256]
lspci -v: Memory at f9cfe000 (32-bit, non-prefetchable) [size=256]
lspci -v: Memory at f9cff000 (32-bit, non-prefetchable) [size=4K]
lspci -v:
lspci -v: 0000:00:12.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02)
lspci -v: Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz]
lspci -v: Flags: medium devsel, IRQ 18
lspci -v: Memory at f9cfd000 (32-bit, non-prefetchable) [disabled] [size=32]
lspci -v: I/O ports at febfe800 [disabled] [size=32]
lspci -v:
lspci -v: 0000:00:16.0 VGA compatible controller: IBM 256-bit Graphics Rasterizer [Fire GL1] (rev 02)
lspci -v: Subsystem: IBM: Unknown device 017d
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 18, IRQ 17
lspci -v: Memory at f9e60000 (32-bit, non-prefetchable) [size=128K]
lspci -v: Memory at fa000000 (32-bit, non-prefetchable) [size=32M]
lspci -v: Expansion ROM at f9ec0000 [disabled] [size=256K]
lspci -v: Capabilities: [70] Power Management version 1
lspci -v:
lspci -v: 0000:00:17.0 PCI bridge: IBM IBM27-82351 (rev 01)
lspci -v: Flags: bus master, medium devsel, latency 16
lspci -v: Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
lspci -v: I/O behind bridge: 00bff000-00bfffff
lspci -v: Memory behind bridge: f9d00000-f9dfffff
lspci -v:
lspci -v: 0000:01:01.0 Token ring network controller: IBM 16/4 Token ring UTP/STP controller (rev 68)
lspci -v: Flags: bus master, medium devsel, latency 18, IRQ 20
lspci -v: I/O ports at febffc00 [size=256]
lspci -v: Memory at f9dfa000 (32-bit, non-prefetchable) [size=256]
lspci -v: Memory at f9dfb000 (32-bit, non-prefetchable) [size=2K]
lspci -v: Expansion ROM at f9dfc000 [disabled] [size=16K]
lspci -v: Capabilities: [dc] Power Management version 1
lspci -v:
lspci -x: 0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
lspci -x: 00: 57 10 02 00 46 41 80 20 40 00 00 06 08 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:0b.0 ISA bridge: Symphony Labs W83C553 (rev 10)
lspci -x: 00: ad 10 65 05 47 01 00 02 10 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:0b.1 IDE interface: Symphony Labs SL82c105 (rev 05)
lspci -x: 00: ad 10 05 01 45 01 80 02 05 8f 01 01 08 10 80 00
lspci -x: 10: 01 d4 bf 00 01 cc bf 00 01 d8 bf 00 01 d0 bf 00
lspci -x: 20: 01 dc bf 00 01 e0 bf 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 02 28
lspci -x:
lspci -x: 0000:00:0c.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26)
lspci -x: 00: 23 10 00 20 47 01 80 02 26 00 00 02 00 12 00 00
lspci -x: 10: 01 e4 bf 00 00 c0 cf f9 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 f0 f9 00 00 00 00 00 00 00 00 16 01 06 ff
lspci -x:
lspci -x: 0000:00:0d.0 ff00: IBM MPIC interrupt controller
lspci -x: 00: 14 10 46 00 02 00 00 02 00 00 00 ff 00 00 00 00
lspci -x: 10: 00 00 e8 f9 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
lspci -x: 00: 00 10 0f 00 57 01 00 02 04 00 00 01 08 12 00 00
lspci -x: 10: 01 ec bf 00 00 e0 cf f9 00 f0 cf f9 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 17 01 11 40
lspci -x:
lspci -x: 0000:00:12.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02)
lspci -x: 00: 44 12 00 0a 40 01 80 02 02 00 80 02 00 00 00 00
lspci -x: 10: 00 d0 cf f9 01 e8 bf 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 44 12 00 0a
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 12 01 00 00
lspci -x:
lspci -x: 0000:00:16.0 VGA compatible controller: IBM 256-bit Graphics Rasterizer [Fire GL1] (rev 02)
lspci -x: 00: 14 10 b7 00 46 01 b0 02 02 00 00 03 08 12 00 00
lspci -x: 10: 00 00 e6 f9 00 00 00 fa 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 7d 01
lspci -x: 30: 00 00 ec f9 70 00 00 00 00 00 00 00 11 01 ff ff
lspci -x:
lspci -x: 0000:00:17.0 PCI bridge: IBM IBM27-82351 (rev 01)
lspci -x: 00: 14 10 22 00 47 01 80 02 01 00 04 06 08 10 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 01 01 80 f1 f1 80 24
lspci -x: 20: d0 f9 d0 f9 00 01 f0 00 00 00 00 00 00 00 00 00
lspci -x: 30: bf 00 bf 00 00 00 00 00 00 00 00 00 00 00 03 00
lspci -x:
lspci -x: 0000:01:01.0 Token ring network controller: IBM 16/4 Token ring UTP/STP controller (rev 68)
lspci -x: 00: 14 10 3e 00 47 01 90 02 68 00 01 02 08 12 00 00
lspci -x: 10: 01 fc bf 00 00 a0 df f9 00 b0 df f9 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 07 3e 00 00 00 00 00 00
lspci -x: 30: 00 c0 df f9 dc 00 00 00 00 00 00 00 14 01 0a 20
lspci -x:
lsmod: Module Size Used by
lsmod: nls_utf8 2240 0
lsmod: hfsplus 89156 0
lsmod: hfs 58020 0
lsmod: xfs 533428 1
lsmod: exportfs 6464 1 xfs
lsmod: reiserfs 331896 0
lsmod: jfs 201384 0
lsmod: ext3 154632 0
lsmod: jbd 68564 1 ext3
lsmod: vfat 14688 0
lsmod: fat 59836 1 vfat
lsmod: ext2 79816 0
lsmod: mbcache 10980 2 ext3,ext2
lsmod: olympic 28896 0
lsmod: pcnet32 38900 0
lsmod: mii 6720 1 pcnet32
lsmod: isofs 40248 0
lsmod: ide_cd 47460 0
lsmod: ide_disk 19648 0
lsmod: ide_floppy 22208 0
lsmod: aec62xx 8128 0 [permanent]
lsmod: cmd64x 12412 0 [permanent]
lsmod: hpt34x 5536 0 [permanent]
lsmod: ns87415 4868 0 [permanent]
lsmod: pdc202xx_new 11328 0 [permanent]
lsmod: pdc202xx_old 12000 0 [permanent]
lsmod: sc1200 9312 0 [permanent]
lsmod: siimage 13920 0 [permanent]
lsmod: trm290 4898 0 [permanent]
lsmod: via82cxxx 10340 0 [permanent]
lsmod: floppy 79936 0
lsmod: sd_mod 21936 3
lsmod: sr_mod 20420 0
lsmod: cdrom 44028 2 ide_cd,sr_mod
lsmod: atkbd 18956 0
lsmod: libps2 7456 1 atkbd
lsmod: i8042 16796 0
lsmod: serio 18728 4 atkbd,i8042
lsmod: sym53c8xx 85076 2
lsmod: scsi_transport_spi 25600 1 sym53c8xx
lsmod: scsi_mod 169828 4 sd_mod,sr_mod,sym53c8xx,scsi_transport_spi
lsmod: sl82c105 7552 0 [permanent]
lsmod: generic 4772 0 [permanent]
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 102400 29152 73248 28% /
df: tmpfs 127948 424 127524 0% /dev
df: tmpfs 127948 424 127524 0% /dev
df: tmpfs 127948 424 127524 0% /.dev
df: /dev/scsi/host0/bus0/target4/lun0/part2 8290304 560548 7729756 7% /target
free: total used free shared buffers
free: Mem: 255900 248172 7728 0 132
free: Swap: 578552 19048 559504
free: Total: 834452 267220 567232
cardctl status: /usr/bin/report-hw: 32: cardctl: not found
cardctl ident: /usr/bin/report-hw: 33: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: cpu : 604r
/proc/cpuinfo: clock : 250MHz
/proc/cpuinfo: revision : 49.2 (pvr 0009 3102)
/proc/cpuinfo: bogomips : 248.32
/proc/cpuinfo: machine : CHRP IBM,7043-150
/proc/ioports: 00000000-00bfffff : /pci@80000000
/proc/ioports: 00000000-0000001f : dma1
/proc/ioports: 00000020-00000021 : 8259 (master)
/proc/ioports: 00000040-0000005f : timer
/proc/ioports: 00000060-0000006f : i8042
/proc/ioports: 00000080-0000008f : dma page reg
/proc/ioports: 000000a0-000000a1 : 8259 (slave)
/proc/ioports: 000000c0-000000df : dma2
/proc/ioports: 000002f8-000002ff : serial
/proc/ioports: 000003f8-000003ff : serial
/proc/ioports: 000004d0-000004d1 : 8259 edge control
/proc/ioports: 00bfcc00-00bfcc03 : 0000:00:0b.1
/proc/ioports: 00bfd000-00bfd003 : 0000:00:0b.1
/proc/ioports: 00bfd400-00bfd407 : 0000:00:0b.1
/proc/ioports: 00bfd800-00bfd807 : 0000:00:0b.1
/proc/ioports: 00bfdc00-00bfdc0f : 0000:00:0b.1
/proc/ioports: 00bfdc00-00bfdc07 : ide0
/proc/ioports: 00bfdc08-00bfdc0f : ide1
/proc/ioports: 00bfe000-00bfe00f : 0000:00:0b.1
/proc/ioports: 00bfe400-00bfe41f : 0000:00:0c.0
/proc/ioports: 00bfe400-00bfe41f : pcnet32_probe_pci
/proc/ioports: 00bfe800-00bfe81f : 0000:00:12.0
/proc/ioports: 00bfec00-00bfecff : 0000:00:10.0
/proc/ioports: 00bfec00-00bfecff : sym53c8xx
/proc/ioports: 00bff000-00bfffff : PCI Bus #01
/proc/ioports: 00bffc00-00bffcff : 0000:01:01.0
/proc/ioports: 00bffc00-00bffcff : olympic
/proc/iomem: 80000000-fcffffff : /pci@80000000
/proc/iomem: f9cfc000-f9cfc01f : 0000:00:0c.0
/proc/iomem: f9cfd000-f9cfd01f : 0000:00:12.0
/proc/iomem: f9cfe000-f9cfe0ff : 0000:00:10.0
/proc/iomem: f9cfe000-f9cfe0ff : sym53c8xx
/proc/iomem: f9cff000-f9cfffff : 0000:00:10.0
/proc/iomem: f9cff000-f9cfffff : sym53c8xx
/proc/iomem: f9d00000-f9dfffff : PCI Bus #01
/proc/iomem: f9dfa000-f9dfa0ff : 0000:01:01.0
/proc/iomem: f9dfa000-f9dfa0ff : olympic
/proc/iomem: f9dfb000-f9dfb7ff : 0000:01:01.0
/proc/iomem: f9dfb000-f9dfb7ff : olympic
/proc/iomem: f9e60000-f9e7ffff : 0000:00:16.0
/proc/iomem: f9e80000-f9ebffff : 0000:00:0d.0
/proc/iomem: fa000000-fbffffff : 0000:00:16.0
/proc/iomem: fa000000-fa3fffff : offb
/proc/iomem: fd000000-fdffffff : /pci@80000000
/proc/interrupts: CPU0
/proc/interrupts: 1: 2008 i8259 Edge i8042
/proc/interrupts: 2: 0 i8259 Edge 82c59 secondary cascade
/proc/interrupts: 16: 1 OpenPIC Edge <NULL>
/proc/interrupts: 22: 91849 OpenPIC Level eth0
/proc/interrupts: 23: 69327 OpenPIC Level sym53c8xx
/proc/interrupts: BAD: 0
/proc/meminfo: MemTotal: 255900 kB
/proc/meminfo: MemFree: 7728 kB
/proc/meminfo: Buffers: 132 kB
/proc/meminfo: Cached: 205456 kB
/proc/meminfo: SwapCached: 1712 kB
/proc/meminfo: Active: 140584 kB
/proc/meminfo: Inactive: 78700 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 255900 kB
/proc/meminfo: LowFree: 7728 kB
/proc/meminfo: SwapTotal: 578552 kB
/proc/meminfo: SwapFree: 559504 kB
/proc/meminfo: Dirty: 7596 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 14104 kB
/proc/meminfo: Slab: 23100 kB
/proc/meminfo: CommitLimit: 706500 kB
/proc/meminfo: Committed_AS: 53968 kB
/proc/meminfo: PageTables: 288 kB
/proc/meminfo: VmallocTotal: 720624 kB
/proc/meminfo: VmallocUsed: 8332 kB
/proc/meminfo: VmallocChunk: 711368 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0002 Version=ab83
/proc/bus/input/devices: N: Name="AT Raw Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: 41: dmidecode: not found
==============================================
Installer status:
==============================================
Package: scsi-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: scsi-modules
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di, cdrom-core-modules-2.6.15-1-powerpc-di, firmware-modules-2.6.15-1-powerpc-di
Description: SCSI drivers
Package: ide-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: ide-modules
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Description: IDE drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.14.1
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.03
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.35)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.03
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.5-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: pcmcia-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: pcmcia-modules
Depends: firmware-modules-2.6.15-1-powerpc-di
Description: Common PCMCIA drivers
Package: cdrom-checker
Status: install ok unpacked
Version: 1.06
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.17
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2002.12.04dbs-52.2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.08
Provides: retriever
Depends: cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.10
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38)
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.23
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: Miscellaneous utilities for the debian installer
Package: pcmcia-storage-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.15-1-powerpc-di, cdrom-core-modules-2.6.15-1-powerpc-di, pcmcia-modules-2.6.15-1-powerpc-di
Description: PCMCIA storage drivers
Package: usb-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: usb-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: USB support
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.97
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.51
Description: Newt frontend for Debian Configuration Management System
Package: usb-storage-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: usb-storage-modules
Depends: scsi-core-modules-2.6.15-1-powerpc-di, usb-modules-2.6.15-1-powerpc-di
Description: USB storage support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.29
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.085-1
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: input-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: input-modules
Depends: kernel-image-2.6.15-1-powerpc-di, usb-modules-2.6.15-1-powerpc-di
Description: Input devices support
Package: kernel-image-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-1
Depends: libc-udeb
Description: Free Implementation of the Unicode BiDi algorithm
Package: scsi-core-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: scsi-core-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Core SCSI subsystem
Package: rescue-check
Status: install ok unpacked
Version: 1.3
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.10-2
Provides: editor
Depends: libc-udeb, libslang2-udeb
Description: free Pico clone with some new features - tiny build
Package: scsi-common-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: scsi-common-modules
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di, cdrom-core-modules-2.6.15-1-powerpc-di
Description: Very common SCSI drivers
Package: cdebconf-udeb
Status: install ok installed
Version: 0.97
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.36), libtextwrap1 (>> 0.01-0)
Description: Debian Configuration Management System (C-implementation)
Package: firmware-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: firmware-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Firmware request modules
Package: load-cdrom
Status: install ok installed
Version: 1.08
Depends: cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 14
Package: floppy-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: floppy-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Floppy driver
Package: iso-3166-udeb
Status: install ok installed
Version: 0.49-1
Description: provides iso_3166.tab file
Package: fs-common-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: fs-common-modules
Depends: kernel-image-2.6.15-1-powerpc-di
Description: Common filesystem support
Package: floppy-retriever
Status: install ok unpacked
Version: 1.08
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.01-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.14.1
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.33
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: Hardware architecture detector
Package: save-logs
Status: install ok installed
Version: 2.12
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.23
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.21
Depends: cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 012-4
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs1
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.1.11-15.3
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2002.12.04dbs-52.2
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.23
Description: Terminfo entries needed by newt/slang in debian installer
Package: cdrom-core-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: cdrom-core-modules
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di, ide-modules-2.6.15-1-powerpc-di
Description: CDROM support
Package: hw-detect
Status: install ok installed
Version: 1.33
Depends: rootskel (>= 0.54), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.15)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.38
Provides: libdebian-installer4
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: eject-udeb
Status: install ok unpacked
Version: 2.1.4-1
Depends: libc6 (>= 2.3.5-1), debconf (>= 0.5) | debconf-2.0
Description: ejects CDs from d-i menu
Installer-Menu-Item: 960
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.14.1
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.5
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.97
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: file-preseed
Status: install ok unpacked
Version: 1.14.1
Depends: di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: libsysfs1-udeb
Status: install ok unpacked
Version: 1.3.0-7
Provides: libsysfs1
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: firewire-core-modules-2.6.15-1-powerpc-di
Status: install ok unpacked
Version: 1.10
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.15-1-powerpc-di, kernel-image-2.6.15-1-powerpc-di
Description: Core FireWire drivers
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.97
Provides: libdebconfclient0
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: cdrom-detect
Status: install ok installed
Version: 1.12
Depends: hw-detect, di-utils (>= 1.15)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 14
Package: debian-installer
Status: install ok installed
Version: powerpc-cdrom-20060304
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: cdrom-detect
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: choose-mirror
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.6
Depends: apt-mirror-setup
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 480
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.49
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.19
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.38), configured-network
Description: Choose mirror to install from
Installer-Menu-Item: 23
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.8
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 416
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ethdetect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 84
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.33
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: ethernet-card-detection
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 15
Package: ext2-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: ext2-modules
Description: EXT2 filesystem support
This package contains the EXT2 filesystem module for the Linux kernel.
Package: ext3-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 144
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: jfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 264
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1148
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1972
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.5-13
Provides: libc6, libc-udeb, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.01-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 44
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.01.04-2
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.01
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libiw28-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre14-1
Provides: libiw28
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 356
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-2
Depends: libc6 (>= 2.3.5-1), libuuid1
Provides: libparted1.6-13
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2005.12.31-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: loop-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 500
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.01.04-5
Depends: libc6 (>= 2.3.2.ds1-21), libdevmapper1.01
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15)
Description: lvmcfg without the main menu item
Package: md-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 400
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 112
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 1.12.0-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux md device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 312
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.14
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-1
Depends: libc6 (>= 2.3.2.ds1-4), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: netcfg
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 668
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0, libdebian-installer4 (>= 0.36), libiw28-udeb, cdebconf-udeb, dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Provides: configured-network
Description: Configure the network
To install additional installer components or the Debian Base System over
the network, you need to configure the network in the installer. This
component will first try to configure your network with DHCP and ask
you for static network configuration if this fails. The configured
network settings will be copied to your newly installed system.
Installer-Menu-Item: 18
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 20
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14.1
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, nic-shared-modules-2.6.15-1-powerpc-di, firmware-modules-2.6.15-1-powerpc-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, nic-shared-modules-2.6.15-1-powerpc-di, firmware-modules-2.6.15-1-powerpc-di, firewire-core-modules-2.6.15-1-powerpc-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 828
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, nic-shared-modules-2.6.15-1-powerpc-di, nic-extra-modules-2.6.15-1-powerpc-di, pcmcia-modules-2.6.15-1-powerpc-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nobootloader
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.07
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.12
Depends: libc6 (>= 2.3.5-1), libdebian-installer4 (>= 0.38), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-2
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 312
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 9
Depends: partman-base (>= 73), partman-auto (>= 46), partman-lvm, di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 776
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 78.1
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 508
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 120
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 16
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 156
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: lvmcfg-utils, lvm2-udeb, partman-base (>= 73), di-utils (>= 1.14)
Description: Add to partman support for LVM
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 23
Depends: mdadm-udeb, mdcfg-utils, partman-base (>= 73)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 324
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 38
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-prep
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 96
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: partman-base
Description: Add partman support for PPC PReP boot partitions
This package provides the 'prep' partition method. The yaboot
boot loader used on IBM pSeries systems requires a special
bootstrap partition, created by this method.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 42
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 28
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 24
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.05
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: prebaseconfig
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: archdetect, base-installer, created-fstab, bootable-system
Description: Finish the installation and reboot
finish the installation and reboot
Installer-Menu-Item: 78
Package: prep-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.2
Depends: kernel-installer, parted-udeb, di-utils-mapdevfs, os-prober, archdetect
Provides: bootable-system
Description: Install a kernel directly to the prep partition on a hard disk
This package will install a prep or chrp kernel directly to a prep partition.
Installer-Menu-Item: 75
Package: reiserfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 396
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: scsi-modules-2.6.15-1-powerpc-di, scsi-core-modules-2.6.15-1-powerpc-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.8
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.0
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 27+28pre14-1
Depends: libiw28-udeb (= 27+28pre14-1)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 656
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 260
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.7.7-1
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: yaboot-installer
Status: install ok half-configured
Priority: standard
Section: debian-installer
Installed-Size: 220
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1.5
Depends: kernel-installer, partconf-find-partitions (>= 1.08), di-utils (>= 1.15), di-utils-mapdevfs, os-prober, archdetect
Provides: bootable-system
Description: Install yaboot on a hard disk
This package will install yaboot on the hard disk.
Installer-Menu-Item: 73
Package: hfs-modules-2.6.15-1-powerpc-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.15-1-powerpc-di, fs-common-modules-2.6.15-1-powerpc-di
Provides: hfs-modules
Description: HFS filesystem support
This package contains the HFS and HFS+ filesystem modules for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.18 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---