[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#517859: marked as done (wrong kernel used for VIA Nehemiah processor)

Your message dated Mon, 19 Jul 2010 20:31:11 +0200
with message-id <1279564271.2955.5.camel@RBG-A64.fritz.box>
and subject line Resolved
has caused the Debian Bug report #517859,
regarding wrong kernel used for VIA Nehemiah processor
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
517859: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517859
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version: Self-made boot CD with Lenny Debian Installer 5.0.0
Date: 2009-03-01

Machine: Self-made Desktop PC
Processor: VIA C3 Nehemia 667MHz
Memory: 512MB
Partitions: <df -Tl will do; the raw partition table is preferred>

> Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
> /dev/hda1 ext3 2885780 636284 2102908 24% / tmpfs tmpfs 250108 0
> 250108 0% /lib/init/rw udev tmpfs 10240 68 10172 1% /dev tmpfs tmpfs
> 250108 0 250108 0% /dev/shm /dev/hda5 xfs 152302048 35293404 117008644
> 24% /storage 

Output of lspci -knn:

> 00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8623 [Apollo
> CLE266] [1106:3123] Kernel driver in use: agpgart-via Kernel modules:
> via-agp 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633
> [Apollo Pro266 AGP] [1106:b091] Kernel modules: shpchp 00:10.0 USB
> Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller [1106:3038] (rev 80) Kernel driver in use: uhci_hcd Kernel
> modules: uhci-hcd 00:10.1 USB Controller [0c03]: VIA Technologies,
> Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80) Kernel
> driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.2 USB
> Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller [1106:3038] (rev 80) Kernel driver in use: uhci_hcd Kernel
> modules: uhci-hcd 00:10.3 USB Controller [0c03]: VIA Technologies,
> Inc. USB 2.0 [1106:3104] (rev 82) Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd 00:11.0 ISA bridge [0601]: VIA Technologies,
> Inc. VT8235 ISA Bridge [1106:3177] Kernel modules: via-ircc,
> i2c-viapro 00:11.1 IDE interface [0101]: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
> (rev 06) Kernel driver in use: VIA_IDE Kernel modules: via82cxxx
> 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102
> [Rhine-II] [1106:3065] (rev 74) Kernel driver in use: via-rhine Kernel
> modules: via-rhine 01:00.0 VGA compatible controller [0300]: VIA
> Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock
> graphics [1106:3122] (rev 03) Kernel modules: vt8623fb 

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [E]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:

The used Processor is a VIA C3 Nehemia Processor with 667MHz.
Debian 4.0 "etch" has installed the 686 kernel.
With Debian 5.0.0 "lenny", there is the 486 kernel installed.

Because, this is only a file server, the 486 kernel works fine.
There are no performance differences between the 486 kernel or the 686 kernel.

>From my side, the bug report can be closed.
This is only for information.

Regards
Bernhard

--- End Message ---
--- Begin Message --- 
With daily-build, the correct kernel-image (-686) is used.

Thanks

Regards
Bernhard

Attachment: signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil


--- End Message ---
Reply to: