Bug#509799: marked as done (needs check to make sure /boot is bootable on HP mv2120 and Kurobox)
Your message dated Mon, 22 Feb 2010 03:39:13 +0000
with message-id <E1NjP8b-0004Uq-1x@ries.debian.org>
and subject line Bug#509799: fixed in partman-ext3 59
has caused the Debian Bug report #509799,
regarding needs check to make sure /boot is bootable on HP mv2120 and Kurobox
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
509799: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509799
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: Debian on the HP mv2120
- From: Martin Michlmayr <tbm@cyrius.com>
- Date: Fri, 26 Dec 2008 14:16:42 +0100
- Message-id: <20081226131641.GA24940@deprecation.cyrius.com>
Package: installation-reports
----- Forwarded message from "Stillwell, Bryan" <bryan.stillwell@hp.com> -----
From: "Stillwell, Bryan" <bryan.stillwell@hp.com>
Subject: Re: Debian on the HP mv2120
Date: Tue, 11 Nov 2008 10:17:40 -0700
To: Martin Michlmayr <tbm@cyrius.com>
X-Mailer: Evolution 2.22.2
Martin,
I tried this out last night and it worked pretty well for me. I ran
into a few issues though.
The first one was pretty silly, I forgot to mark /dev/sda1 (/boot) as
bootable. It would have been nice if the partitioner warned me about
this before completing the install and having the system fail to boot.
I was able to fix this by booting the installer again, setting /dev/sda1
as bootable and 'do not use', then going into the lvm configuration
screen to save the settings to disk. Dropping to a shell showed fdisk
and parted as not being available.
The second issue was that there wasn't an option to format a partition
with XFS.
The third issue showed up when I was setting up the partitions as
follows (I have 2 1TB drives):
/dev/sda1 256MB /boot - ext3
/dev/sda2 128MB RAID partition
/dev/sda3 4GB RAID partition
/dev/sda4 996GB RAID partition
/dev/sdb1 256MB Don't use
/dev/sdb2 128MB RAID partition
/dev/sdb3 4GB RAID partition
/dev/sdb4 996GB RAID partition
/dev/md0 256MB swap (RAID0)
/dev/sda2
/dev/sdb2
/dev/md1 4GB / - ext3 (RAID1)
/dev/sda3
/dev/sdb3
/dev/md2 996GB LVM partition
/dev/sda4
/dev/sdb4
/dev/vg00 996GB Volume Group
/dev/md2
/dev/vg00/music 200GiB /music - ext3 (I wanted XFS)
The problem showed up after setting up the RAID partitions and then
configuring LVM. It reported that the partitioning of some of the RAID
partitions (md0, md1) couldn't be saved and I must reboot for the
changes to take effect. I'm guessing the installer is thinking it made
the arrays with mdadm's '--auto=mdp' option to create partitionable
arrays, but that's not what I wanted...
Let me know if you want me to file any of these as bug reports.
Thanks,
Bryan
----- End forwarded message -----
--
Martin Michlmayr
http://www.cyrius.com/
--- End Message ---
--- Begin Message ---
Source: partman-ext3
Source-Version: 59
We believe that the bug you reported is fixed in the latest version of
partman-ext3, which is due to be installed in the Debian FTP archive:
partman-ext3_59.dsc
to main/p/partman-ext3/partman-ext3_59.dsc
partman-ext3_59.tar.gz
to main/p/partman-ext3/partman-ext3_59.tar.gz
partman-ext3_59_all.udeb
to main/p/partman-ext3/partman-ext3_59_all.udeb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 509799@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Frans Pop <fjp@debian.org> (supplier of updated partman-ext3 package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Mon, 22 Feb 2010 04:18:34 +0100
Source: partman-ext3
Binary: partman-ext3
Architecture: source all
Version: 59
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Frans Pop <fjp@debian.org>
Description:
partman-ext3 - Add to partman support for ext3 and ext4 (udeb)
Closes: 504397 509799
Changes:
partman-ext3 (59) unstable; urgency=low
.
[ Colin Watson ]
* Upgrade to debhelper v7.
.
[ Frans Pop ]
* Remove no longer needed Lintian override for missing Standards-Version
field.
.
[ Christian Perrier ]
* Drop double spaces after period in templates.
.
[ Martin Michlmayr ]
* check.d/ext2_or_ext3_boot: when a RAID1 partition is used for /boot
don't check whether it's the 1st primary partition. There's no good
way to map a RAID partition to its physical partition at the moment.
(Closes: #504397).
* check.d/ext2_or_ext3_boot: ensure that the /boot partition has the
bootable flag (Closes: #509799).
.
[ Updated translations ]
* Amharic (am.po) by Tegegne Tefera
* Arabic (ar.po) by Ossama M. Khayat
* Asturian (ast.po) by marquinos
* Belarusian (be.po) by Pavel Piatruk
* Bulgarian (bg.po) by Damyan Ivanov
* Bengali (bn.po) by Israt Jahan
* Czech (cs.po) by Miroslav Kure
* Danish (da.po) by Ask Hjorth Larsen
* German (de.po) by Holger Wansing
* Greek, Modern (1453-) (el.po)
* Esperanto (eo.po) by Felipe Castro
* Spanish (es.po) by Javier Fernández-Sanguino Peña
* Estonian (et.po) by Mattias Põldaru
* Basque (eu.po) by Piarres Beobide
* Finnish (fi.po) by Esko Arajärvi
* French (fr.po) by Christian Perrier
* Galician (gl.po) by Marce Villarino
* Hindi (hi.po)
* Hungarian (hu.po) by SZERVÁC Attila
* Italian (it.po) by Milo Casagrande
* Japanese (ja.po) by Kenshi Muto
* Korean (ko.po) by Changwoo Ryu
* Lithuanian (lt.po) by Kęstutis Biliūnas
* Marathi (mr.po) by Sampada
* Bokmål, Norwegian (nb.po) by Hans Fredrik Nordhaug
* Dutch (nl.po) by Frans Pop
* Polish (pl.po) by Bartosz Fenski
* Portuguese (pt.po) by Miguel Figueiredo
* Romanian (ro.po) by Eddy Petrișor
* Russian (ru.po) by Yuri Kozlov
* Slovak (sk.po) by Ivan Masár
* Slovenian (sl.po) by Vanja Cvelbar
* Swedish (sv.po) by Daniel Nylander
* Thai (th.po) by Theppitak Karoonboonyanan
* Turkish (tr.po) by Mert Dirik
* Vietnamese (vi.po) by Clytie Siddall
* Wolof (wo.po) by Mouhamadou Mamoune Mbacke
* Simplified Chinese (zh_CN.po) by 苏运强
Checksums-Sha1:
3e8493d3adff6eeaf49e433198db6517f95fd057 856 partman-ext3_59.dsc
826bb7695b823b9053c66734c5d94ac47c203535 79755 partman-ext3_59.tar.gz
dcfcc0ef446e2a356c0ed865c17336cc0c962319 64686 partman-ext3_59_all.udeb
Checksums-Sha256:
d8e9de11610e87cda0beaba3cf6802e5b86baa8708241c1bf66a3d17c54d0ba4 856 partman-ext3_59.dsc
7e32ab0c38069f075a8ac840e696e7f517d409298fd953bfa0ec429baed5cc08 79755 partman-ext3_59.tar.gz
dd9c29444320b7a707cb64b0d3ff249c79c3a89c39e8204d199a9b3f73d1f6d9 64686 partman-ext3_59_all.udeb
Files:
9bd6d1d229fce5666bc83ba0177e9894 856 debian-installer standard partman-ext3_59.dsc
2c389baf74ede72b9c544e2ae6fd3255 79755 debian-installer standard partman-ext3_59.tar.gz
4398a5d556ddde36fc6daa641acb7555 64686 debian-installer standard partman-ext3_59_all.udeb
Package-Type: udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkuB+MEACgkQgm/Kwh6ICoTPJQCbBGqrMO4aRDe/Vf0OKDf+k7e9
N9cAoMhfi080aL1pXasHbBys0ZUfBSEM
=kRFD
-----END PGP SIGNATURE-----
--- End Message ---
Reply to: