--- Begin Message ---
Package: installation-reports
The attached installation logs were stored via the menu option "Save debug logs" to the USB pendrive, after mounting it to /media.
Boot method: USB
Image version: http://ftp.nl.debian.org/debian/dists/testing/main/installer-amd64/current/images/hd-media/boot.img.gz, http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-businesscard.iso
Date: Mon 2009-Sep-28
Machine: Homemage AMD64
Processor: AMD Athlon64
Memory: 2GB
Partitions: cannot see, but I use something like /boot (ext3, 100MB, bootable) for kernel and grub-stuff, / (ext3, 10GB) for the system, and /data (ext3, 80GB) for home directories and such stuff.
Output of lspci -knn (or lspci -nn): attached
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems: Iso-scan is unable to find the provided ISO image on the USB device.
I have set up the USB pendrive as follows:
>>>>>
dev='/dev/disk/by-id/usb-PNY_ATTACHE_PRO_07750E180008-0:0';
curl 'http://ftp.nl.debian.org/debian/dists/testing/main/installer-amd64/current/images/hd-media/boot.img.gz' | gunzip > "$dev";
mount "$dev" /media/usb;
pushd /media/usb;
curl -O 'http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-businesscard.iso';
popd
umount "$dev";
<<<<<
I have installed Debian/Testing to the same machine from USB pendrive some time ago, i.e., when testing was "lenny".
Can anyone help me, please?
Regards,
Stefan
--
Stefan Klinger o/klettern
/\/ bis zum
send plaintext only - max size 32kB - no spam \ Abfallen
http://stefan-klinger.de
umame -a: Linux (none) 2.6.26-2-amd64 #1 SMP Wed Aug 19 22:33:18 UTC 2009 x86_64 unknown
lspci -knn: 00:00.0 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller [10de:0444] (rev a3)
lspci -knn: 00:01.0 ISA bridge [0601]: nVidia Corporation MCP65 LPC Bridge [10de:0441] (rev a3)
lspci -knn: 00:01.1 SMBus [0c05]: nVidia Corporation MCP65 SMBus [10de:0446] (rev a1)
lspci -knn: 00:01.2 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller [10de:0445] (rev a1)
lspci -knn: 00:02.0 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0454] (rev a3)
lspci -knn: Kernel driver in use: ohci_hcd
lspci -knn: Kernel modules: ohci-hcd
lspci -knn: 00:02.1 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0455] (rev a3)
lspci -knn: Kernel driver in use: ehci_hcd
lspci -knn: Kernel modules: ehci-hcd
lspci -knn: 00:07.0 Audio device [0403]: nVidia Corporation MCP65 High Definition Audio [10de:044a] (rev a1)
lspci -knn: 00:08.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI bridge [10de:0449] (rev a1)
lspci -knn: 00:09.0 IDE interface [0101]: nVidia Corporation MCP65 IDE [10de:0448] (rev a1)
lspci -knn: Kernel driver in use: AMD_IDE
lspci -knn: Kernel modules: amd74xx
lspci -knn: 00:0a.0 IDE interface [0101]: nVidia Corporation MCP65 SATA Controller [10de:045d] (rev a3)
lspci -knn: Kernel driver in use: ahci
lspci -knn: Kernel modules: ahci
lspci -knn: 00:0b.0 PCI bridge [0604]: nVidia Corporation Device [10de:045b] (rev a1)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:0c.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:045a] (rev a1)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:0d.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0458] (rev a1)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:0e.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0459] (rev a1)
lspci -knn: Kernel driver in use: pcieport-driver
lspci -knn: 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
lspci -knn: 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
lspci -knn: 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
lspci -knn: 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
lspci -knn: 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
lspci -knn: 04:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [GeForce 7300 GS] [10de:01df] (rev a1)
lsmod: Module Size Used by
lsmod: nls_utf8 6144 0
lsmod: nls_cp437 11008 0
lsmod: loop 19340 0
lsmod: isofs 35496 0
lsmod: zlib_inflate 18688 1 isofs
lsmod: vfat 14848 0
lsmod: fat 50872 1 vfat
lsmod: nls_base 12932 5 nls_utf8,nls_cp437,isofs,vfat,fat
lsmod: reiserfs 210432 0
lsmod: ext3 124304 0
lsmod: jbd 50984 1 ext3
lsmod: ext2 66064 0
lsmod: mbcache 12676 2 ext3,ext2
lsmod: vga16fb 16408 2
lsmod: vgastate 12672 1 vga16fb
lsmod: fan 9224 0
lsmod: usbhid 45408 0
lsmod: hid 41536 1 usbhid
lsmod: ff_memless 9224 1 usbhid
lsmod: usb_storage 95296 0
lsmod: sd_mod 29248 0
lsmod: ide_cd_mod 36232 0
lsmod: cdrom 37800 1 ide_cd_mod
lsmod: ahci 32908 0
lsmod: amd74xx 13448 0 [permanent]
lsmod: ide_core 127772 2 ide_cd_mod,amd74xx
lsmod: libata 165344 1 ahci
lsmod: scsi_mod 160376 3 usb_storage,sd_mod,libata
lsmod: dock 13984 1 libata
lsmod: ehci_hcd 35980 0
lsmod: ohci_hcd 24964 0
lsmod: thermal 22560 0
lsmod: processor 42048 1 thermal
lsmod: thermal_sys 17600 3 fan,thermal,processor
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 1031688 688 1031000 0% /dev
free: total used free shared buffers
free: Mem: 2063380 43576 2019804 0 0
free: Swap: 0 0 0
free: Total: 2063380 43576 2019804
/proc/cmdline: vga=normal initrd=initrd.gz -- quiet BOOT_IMAGE=linux
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 75
/proc/cpuinfo: model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 1989.856
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 0
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: apicid : 0
/proc/cpuinfo: initial apicid : 0
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
/proc/cpuinfo: bogomips : 3984.27
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp tm stc
/proc/cpuinfo:
/proc/cpuinfo: processor : 1
/proc/cpuinfo: vendor_id : AuthenticAMD
/proc/cpuinfo: cpu family : 15
/proc/cpuinfo: model : 75
/proc/cpuinfo: model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
/proc/cpuinfo: stepping : 2
/proc/cpuinfo: cpu MHz : 1989.856
/proc/cpuinfo: cache size : 512 KB
/proc/cpuinfo: physical id : 0
/proc/cpuinfo: siblings : 2
/proc/cpuinfo: core id : 1
/proc/cpuinfo: cpu cores : 2
/proc/cpuinfo: apicid : 1
/proc/cpuinfo: initial apicid : 1
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 1
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
/proc/cpuinfo: bogomips : 3979.78
/proc/cpuinfo: TLB size : 1024 4K pages
/proc/cpuinfo: clflush size : 64
/proc/cpuinfo: cache_alignment : 64
/proc/cpuinfo: address sizes : 40 bits physical, 48 bits virtual
/proc/cpuinfo: power management: ts fid vid ttp tm stc
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-0060 : keyboard
/proc/ioports: 0064-0064 : keyboard
/proc/ioports: 0070-0071 : rtc0
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : 0000:00:09.0
/proc/ioports: 0170-0177 : NFORCE-MCP65
/proc/ioports: 01f0-01f7 : 0000:00:09.0
/proc/ioports: 01f0-01f7 : NFORCE-MCP65
/proc/ioports: 0376-0376 : 0000:00:09.0
/proc/ioports: 0376-0376 : NFORCE-MCP65
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 03f6-03f6 : 0000:00:09.0
/proc/ioports: 03f6-03f6 : NFORCE-MCP65
/proc/ioports: 04d0-04d1 : pnp 00:04
/proc/ioports: 0800-080f : pnp 00:04
/proc/ioports: 0a00-0a0f : pnp 00:07
/proc/ioports: 0a10-0a1f : pnp 00:07
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 0e00-0e03 : 0000:00:0a.0
/proc/ioports: 0e00-0e03 : ahci
/proc/ioports: 0e80-0e87 : 0000:00:0a.0
/proc/ioports: 0e80-0e87 : ahci
/proc/ioports: 0f00-0f03 : 0000:00:0a.0
/proc/ioports: 0f00-0f03 : ahci
/proc/ioports: 0f80-0f87 : 0000:00:0a.0
/proc/ioports: 0f80-0f87 : ahci
/proc/ioports: 2000-207f : pnp 00:04
/proc/ioports: 2000-2003 : ACPI PM1a_EVT_BLK
/proc/ioports: 2004-2005 : ACPI PM1a_CNT_BLK
/proc/ioports: 2008-200b : ACPI PM_TMR
/proc/ioports: 2010-2015 : ACPI CPU throttle
/proc/ioports: 2020-2027 : ACPI GPE0_BLK
/proc/ioports: 2080-20ff : pnp 00:04
/proc/ioports: 2400-247f : pnp 00:04
/proc/ioports: 2480-24ff : pnp 00:04
/proc/ioports: 24a0-24af : ACPI GPE1_BLK
/proc/ioports: 2800-287f : pnp 00:04
/proc/ioports: 2880-28ff : pnp 00:04
/proc/ioports: 2900-293f : 0000:00:01.1
/proc/ioports: 2c00-2c7f : pnp 00:04
/proc/ioports: 2c80-2cff : pnp 00:04
/proc/ioports: 2d00-2d3f : 0000:00:01.1
/proc/ioports: 2e00-2e3f : 0000:00:01.1
/proc/ioports: 2f00-2fff : 0000:00:01.0
/proc/ioports: c800-c80f : 0000:00:0a.0
/proc/ioports: c800-c80f : ahci
/proc/ioports: e000-efff : PCI Bus 0000:03
/proc/ioports: e800-e8ff : 0000:03:00.0
/proc/ioports: ffa0-ffaf : 0000:00:09.0
/proc/ioports: ffa0-ffaf : NFORCE-MCP65
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000c0000-000cffff : pnp 00:09
/proc/iomem: 000e4000-000fffff : reserved
/proc/iomem: 00100000-7ffbffff : System RAM
/proc/iomem: 00200000-0042d0ea : Kernel code
/proc/iomem: 0042d0eb-0053b6f7 : Kernel data
/proc/iomem: 005e0000-00675397 : Kernel bss
/proc/iomem: 7ffc0000-7ffcdfff : ACPI Tables
/proc/iomem: 7ffce000-7ffeffff : ACPI Non-volatile Storage
/proc/iomem: 7fff0000-7fffdfff : reserved
/proc/iomem: d0000000-dfffffff : PCI Bus 0000:04
/proc/iomem: d0000000-dfffffff : 0000:04:00.0
/proc/iomem: e0000000-efffffff : PCI MMCONFIG 0
/proc/iomem: e0000000-efffffff : pnp 00:08
/proc/iomem: fbef8000-fbefbfff : 0000:00:07.0
/proc/iomem: fbefc000-fbefdfff : 0000:00:0a.0
/proc/iomem: fbefc000-fbefdfff : ahci
/proc/iomem: fbefec00-fbefecff : 0000:00:02.1
/proc/iomem: fbefec00-fbefecff : ehci_hcd
/proc/iomem: fbeff000-fbefffff : 0000:00:02.0
/proc/iomem: fbeff000-fbefffff : ohci_hcd
/proc/iomem: fbf00000-fbffffff : PCI Bus 0000:03
/proc/iomem: fbfc0000-fbfdffff : 0000:03:00.0
/proc/iomem: fbfff000-fbffffff : 0000:03:00.0
/proc/iomem: fc000000-febfffff : PCI Bus 0000:04
/proc/iomem: fc000000-fcffffff : 0000:04:00.0
/proc/iomem: fd000000-fdffffff : 0000:04:00.0
/proc/iomem: febe0000-febfffff : 0000:04:00.0
/proc/iomem: fec00000-fec00fff : IOAPIC 0
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fee00000-feefffff : reserved
/proc/iomem: fee00000-fee00fff : Local APIC
/proc/iomem: fff00000-ffffffff : reserved
/proc/interrupts: CPU0 CPU1
/proc/interrupts: 0: 36 1 IO-APIC-edge timer
/proc/interrupts: 1: 0 2 IO-APIC-edge i8042
/proc/interrupts: 7: 1 0 IO-APIC-edge
/proc/interrupts: 8: 0 0 IO-APIC-edge rtc0
/proc/interrupts: 9: 0 0 IO-APIC-fasteoi acpi
/proc/interrupts: 12: 0 3 IO-APIC-edge i8042
/proc/interrupts: 14: 0 121 IO-APIC-edge ide0
/proc/interrupts: 22: 0 1343 IO-APIC-fasteoi ehci_hcd:usb2
/proc/interrupts: 23: 0 1 IO-APIC-fasteoi ohci_hcd:usb1
/proc/interrupts: 1275: 0 904 PCI-MSI-edge ahci
/proc/interrupts: NMI: 0 0 Non-maskable interrupts
/proc/interrupts: LOC: 3691 4639 Local timer interrupts
/proc/interrupts: RES: 3117 2596 Rescheduling interrupts
/proc/interrupts: CAL: 96 118 function call interrupts
/proc/interrupts: TLB: 275 231 TLB shootdowns
/proc/interrupts: TRM: 0 0 Thermal event interrupts
/proc/interrupts: THR: 0 0 Threshold APIC interrupts
/proc/interrupts: SPU: 0 0 Spurious interrupts
/proc/interrupts: ERR: 1
/proc/meminfo: MemTotal: 2063380 kB
/proc/meminfo: MemFree: 2019636 kB
/proc/meminfo: Buffers: 0 kB
/proc/meminfo: Cached: 18836 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 8576 kB
/proc/meminfo: Inactive: 12628 kB
/proc/meminfo: SwapTotal: 0 kB
/proc/meminfo: SwapFree: 0 kB
/proc/meminfo: Dirty: 0 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 2452 kB
/proc/meminfo: Mapped: 1588 kB
/proc/meminfo: Slab: 7468 kB
/proc/meminfo: SReclaimable: 2380 kB
/proc/meminfo: SUnreclaim: 5088 kB
/proc/meminfo: PageTables: 548 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: WritebackTmp: 0 kB
/proc/meminfo: CommitLimit: 1031688 kB
/proc/meminfo: Committed_AS: 6276 kB
/proc/meminfo: VmallocTotal: 34359738367 kB
/proc/meminfo: VmallocUsed: 271188 kB
/proc/meminfo: VmallocChunk: 34359466991 kB
/proc/meminfo: HugePages_Total: 0
/proc/meminfo: HugePages_Free: 0
/proc/meminfo: HugePages_Rsvd: 0
/proc/meminfo: HugePages_Surp: 0
/proc/meminfo: Hugepagesize: 2048 kB
/proc/bus/input/devices: I: Bus=0017 Vendor=0001 Product=0001 Version=0100
/proc/bus/input/devices: N: Name="Macintosh mouse button emulation"
/proc/bus/input/devices: P: Phys=
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=0458 Product=002e Version=0110
/proc/bus/input/devices: N: Name="KYE NetScroll+ Traveler"
/proc/bus/input/devices: P: Phys=usb-0000:00:02.1-2.1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input7
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=mouse1
/proc/bus/input/devices: B: EV=17
/proc/bus/input/devices: B: KEY=70000 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=0221 Version=0111
/proc/bus/input/devices: N: Name="Apple, Inc Apple Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:00:02.1-2.2.2/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input8
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=610000 0 0 0 1007b00000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=0221 Version=0111
/proc/bus/input/devices: N: Name="Apple, Inc Apple Keyboard"
/proc/bus/input/devices: P: Phys=usb-0000:00:02.1-2.2.2/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input9
/proc/bus/input/devices: U: Uniq=
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=13
/proc/bus/input/devices: B: KEY=3a00000000 e000000000000 0
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices:
Package: installation-reports
Boot method: <How did you boot the installer? CD? floppy? network?>
Image version: <Full URL to image you downloaded is best>
Date: <Date and time of the install>
Machine: <Description of machine (eg, IBM Thinkpad R32)>
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ ]
Detect network card: [ ]
Configure network: [ ]
Detect CD: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="5.0 (lenny) - installer build 20090123lenny4"
X_INSTALLATION_MEDIUM=hd-media
Package: isofs-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: isofs-modules
Depends: kernel-image-2.6.26-2-amd64-di, nls-core-modules-2.6.26-2-amd64-di, zlib-modules-2.6.26-2-amd64-di
Description: ISOFS filesystem support
Package: cdrom-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: cdrom-core-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, ide-modules-2.6.26-2-amd64-di, isofs-modules-2.6.26-2-amd64-di
Description: CDROM support
Package: preseed-common
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb, di-utils (>= 1.58)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.07
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.59)
Description: tiny dpkg clone
Package: input-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: input-modules
Depends: kernel-image-2.6.26-2-amd64-di, usb-modules-2.6.26-2-amd64-di
Description: Input devices support
Package: localechooser
Status: install ok installed
Version: 2.09
Depends: cdebconf-udeb (>= 0.129)
Description: choose language/country/locale
Installer-Menu-Item: 1000
Package: scsi-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Core SCSI subsystem
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.7-18
Description: GNU C Library: NSS helper for DNS - udeb
Package: scsi-extra-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-extra-modules
Depends: scsi-modules-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di
Description: Uncommon SCSI drivers
Package: lowmemcheck
Status: install ok unpacked
Version: 1.30
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok unpacked
Version: 1.18
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.28
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.65
Depends: cdebconf-udeb, di-utils (>= 1.62)
Description: Execute a shell
Installer-Menu-Item: 95000
Package: di-utils
Status: install ok installed
Version: 1.65
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.61), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: reiserfs-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: reiserfs-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Reiser filesystem support
Package: mmc-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: mmc-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: MMC/SD card modules
Package: ext3-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ext3-modules
Depends: kernel-image-2.6.26-2-amd64-di, core-modules-2.6.26-2-amd64-di
Description: EXT3 filesystem support
Package: uinput-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: uinput-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: uinput support
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.138lenny3
Depends: cdebconf-udeb, di-utils-terminfo, libc6-udeb (>= 2.7-1), libnewt0.52, libslang2-udeb (>= 2.0.7-1)
Description: Newt frontend for Debian Configuration Management System
Package: dhcp3-client-udeb
Status: install ok unpacked
Version: 3.1.1-6+lenny3
Depends: libc6-udeb (>= 2.7-1)
Description: DHCP Client for debian-installer
Package: kernel-image-2.6.26-2-amd64-di
Status: install ok installed
Version: 1.53lenny5
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.4-1
Depends: libc6 (>= 2.7-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.73
Depends: di-utils (>= 1.43), udev-udeb (>= 0.125-6), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ext2-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ext2-modules
Depends: kernel-image-2.6.26-2-amd64-di, core-modules-2.6.26-2-amd64-di
Description: EXT2 filesystem support
Package: udev-udeb
Status: install ok installed
Version: 0.125-7+lenny3
Depends: libc6-udeb (>= 2.7-1)
Description: /dev/ and hotplug management daemon
Package: serial-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: serial-modules
Depends: kernel-image-2.6.26-2-amd64-di, pcmcia-modules-2.6.26-2-amd64-di
Description: Serial drivers
Package: iso-scan
Status: install ok half-configured
Version: 1.27
Provides: cdrom-detect
Depends: cdebconf-udeb, hw-detect, loop-modules, di-utils (>= 1.48)
Description: Scan hard drives for an installer ISO image
Installer-Menu-Item: 1300
Package: brltty-udeb
Status: install ok unpacked
Version: 3.10~r3724-1+lenny1
Depends: libc6-udeb (>= 2.7-1)
Description: Access software for a blind person using a braille display
Package: loop-modules-2.6.26-2-amd64-di
Status: install ok installed
Version: 1.53lenny5
Provides: loop-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Loopback filesystem support
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.9-1
Depends: libc6 (>= 2.7-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-6
Depends: libc6 (>= 2.7-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 1.2
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 1900
Package: load-iso
Status: install ok unpacked
Version: 1.27
Depends: cdebconf-udeb, iso-scan, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from an installer ISO
Installer-Menu-Item: 1600
Package: parport-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: parport-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Parallel port support
Package: rescue-check
Status: install ok unpacked
Version: 1.19
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.7-4
Provides: editor
Depends: libc6-udeb (>= 2.7-1), libslang2-udeb (>= 2.0.7-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.138lenny3
Provides: debconf-2.0
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.61), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 1.2
Depends: keyboard-setup, localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 2200
Package: fb-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: fb-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Frame buffer support
Package: sata-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: sata-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, ata-modules-2.6.26-2-amd64-di
Description: SATA drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.138lenny3
Depends: cdebconf-udeb, libc6-udeb (>= 2.7-1)
Description: Plain text frontend for Debian Configuration Management System
Package: nls-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: nls-core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Core NLS support
Package: usb-serial-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: usb-serial-modules
Depends: kernel-image-2.6.26-2-amd64-di, usb-modules-2.6.26-2-amd64-di
Description: USB serial drivers
Package: fat-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: fat-modules
Depends: kernel-image-2.6.26-2-amd64-di, nls-core-modules-2.6.26-2-amd64-di
Description: FAT filesystem support
Package: scsi-common-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-common-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, cdrom-core-modules-2.6.26-2-amd64-di
Description: Very common SCSI drivers
Package: ethdetect
Status: install ok unpacked
Version: 1.71
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 1700
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.10.2-2
Depends: libc6-udeb (>= 2.7-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.41
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: zlib-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: zlib-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: zlib modules
Package: libiw29-udeb
Status: install ok unpacked
Version: 29-1.1
Depends: libc6-udeb (>= 2.7-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: archdetect
Status: install ok installed
Version: 1.71
Depends: libc6-udeb (>= 2.7-1), libdebian-installer4-udeb (>= 0.61)
Description: Hardware architecture detector
Package: scsi-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: scsi-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, scsi-common-modules-2.6.26-2-amd64-di, parport-modules-2.6.26-2-amd64-di, cdrom-core-modules-2.6.26-2-amd64-di, core-modules-2.6.26-2-amd64-di
Description: SCSI drivers
Package: ide-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ide-modules
Depends: kernel-image-2.6.26-2-amd64-di, ide-core-modules-2.6.26-2-amd64-di
Description: IDE drivers
Package: save-logs
Status: install ok unpacked
Version: 2.38
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 94000
Package: acpi-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: acpi-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: ACPI support modules
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.65
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 99500
Package: anna
Status: install ok unpacked
Version: 1.33
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:3.0.0-6
Depends: libc6-udeb (>= 2.7-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.07-11
Provides: console-keymaps
Depends: cdebconf-udeb
Description: keymaps for PC-style (PS/2 and AT) keyboards
Package: pcmcia-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: pcmcia-modules
Depends: kernel-image-2.6.26-2-amd64-di, core-modules-2.6.26-2-amd64-di
Description: Common PCMCIA drivers
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.65
Description: Terminfo entries needed by newt/slang in debian installer
Package: core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: Core modules
Package: hw-detect
Status: install ok installed
Version: 1.71
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.48)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.45
Provides: keyboard-setup
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 1200
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.61
Depends: libc6-udeb (>= 2.7-1)
Description: Library of common debian-installer functions
Package: usb-storage-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: usb-storage-modules
Depends: kernel-image-2.6.26-2-amd64-di, ide-core-modules-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di, usb-modules-2.6.26-2-amd64-di
Description: USB storage support
Package: installation-locale
Status: install ok unpacked
Version: 1.3
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.41
Description: debconf preseeding via environment variables
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.138lenny3
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 93000
Package: netcfg
Status: install ok unpacked
Version: 1.46
Provides: configured-network
Depends: libc6-udeb (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.59), libiw29-udeb (>= 28+29pre7), dhcp3-client-udeb (>= 3.1.0-2), ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 1800
Package: file-preseed
Status: install ok unpacked
Version: 1.41
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 1400
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3.3.dfsg-12
Description: compression library - runtime for Debian installer
Package: usb-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: usb-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: USB support
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.138lenny3
Depends: libc6-udeb (>= 2.7-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: mountmedia
Status: install ok unpacked
Version: 0.18
Depends: di-utils (>= 1.48)
Description: Mounts media media
Package: ide-core-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ide-core-modules
Depends: kernel-image-2.6.26-2-amd64-di
Description: IDE support
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-2
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: ata-modules-2.6.26-2-amd64-di
Status: install ok unpacked
Version: 1.53lenny5
Provides: ata-modules
Depends: kernel-image-2.6.26-2-amd64-di, scsi-core-modules-2.6.26-2-amd64-di
Description: ATA disk modules
Package: debian-installer
Status: install ok installed
Version: hd-media-20090123lenny4
Description: debian installation image
Sep 28 08:04:25 syslogd started: BusyBox v1.10.2
Sep 28 08:04:25 kernel: klogd started: BusyBox v1.10.2 (Debian 1:1.10.2-2)
Sep 28 08:04:25 kernel: [ 0.000000] Initializing cgroup subsys cpuset
Sep 28 08:04:25 kernel: [ 0.000000] Initializing cgroup subsys cpu
Sep 28 08:04:25 kernel: [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-19) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 22:33:18 UTC 2009
Sep 28 08:04:25 kernel: [ 0.000000] Command line: vga=normal initrd=initrd.gz -- quiet BOOT_IMAGE=linux
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-provided physical RAM map:
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fffe000 (reserved)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Sep 28 08:04:25 kernel: [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Sep 28 08:04:25 kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Sep 28 08:04:25 kernel: [ 0.000000] Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
Sep 28 08:04:25 kernel: [ 0.000000] max_pfn_mapped = 1048576
Sep 28 08:04:25 kernel: [ 0.000000] init_memory_mapping
Sep 28 08:04:25 kernel: [ 0.000000] DMI present.
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: RSDP 000F9930, 0014 (r0 ACPIAM)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: RSDT 7FFC0000, 0034 (r1 010609 RSDT0850 20090106 MSFT 97)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: FACP 7FFC0200, 0084 (r1 010609 FACP0850 20090106 MSFT 97)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: DSDT 7FFC0440, 4B9F (r1 1ADKU 1ADKU004 4 INTL 20051117)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: FACS 7FFCE000, 0040
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: APIC 7FFC0390, 0070 (r1 010609 APIC0850 20090106 MSFT 97)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: MCFG 7FFC0400, 003C (r1 010609 OEMMCFG 20090106 MSFT 97)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: OEMB 7FFCE040, 0071 (r1 010609 OEMB0850 20090106 MSFT 97)
Sep 28 08:04:25 kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
Sep 28 08:04:25 kernel: [ 0.000000] No NUMA configuration found
Sep 28 08:04:25 kernel: [ 0.000000] Faking a node at 0000000000000000-000000007ffc0000
Sep 28 08:04:25 kernel: [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Sep 28 08:04:25 kernel: [ 0.000000] Entering add_active_range(0, 256, 524224) 1 entries of 3200 used
Sep 28 08:04:25 kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ffc0000
Sep 28 08:04:25 kernel: [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
Sep 28 08:04:25 kernel: [ 0.000000] bootmap [0000000000011000 - 0000000000020ff7] pages 10
Sep 28 08:04:25 kernel: [ 0.000000] early res: 0 [0-fff] BIOS data page
Sep 28 08:04:25 kernel: [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
Sep 28 08:04:25 kernel: [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
Sep 28 08:04:25 kernel: [ 0.000000] early res: 3 [7fab1000-7ffbf48f] RAMDISK
Sep 28 08:04:25 kernel: [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved
Sep 28 08:04:25 kernel: [ 0.000000] early res: 5 [8000-bfff] PGTABLE
Sep 28 08:04:25 kernel: [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
Sep 28 08:04:25 kernel: [ 0.000000] Zone PFN ranges:
Sep 28 08:04:25 kernel: [ 0.000000] DMA 0 -> 4096
Sep 28 08:04:25 kernel: [ 0.000000] DMA32 4096 -> 1048576
Sep 28 08:04:25 kernel: [ 0.000000] Normal 1048576 -> 1048576
Sep 28 08:04:25 kernel: [ 0.000000] Movable zone start PFN for each node
Sep 28 08:04:25 kernel: [ 0.000000] early_node_map[2] active PFN ranges
Sep 28 08:04:25 kernel: [ 0.000000] 0: 0 -> 159
Sep 28 08:04:25 kernel: [ 0.000000] 0: 256 -> 524224
Sep 28 08:04:25 kernel: [ 0.000000] On node 0 totalpages: 524127
Sep 28 08:04:25 kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Sep 28 08:04:25 kernel: [ 0.000000] DMA zone: 1246 pages reserved
Sep 28 08:04:25 kernel: [ 0.000000] DMA zone: 2697 pages, LIFO batch:0
Sep 28 08:04:25 kernel: [ 0.000000] DMA32 zone: 7112 pages used for memmap
Sep 28 08:04:25 kernel: [ 0.000000] DMA32 zone: 513016 pages, LIFO batch:31
Sep 28 08:04:25 kernel: [ 0.000000] Normal zone: 0 pages used for memmap
Sep 28 08:04:25 kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Sep 28 08:04:25 kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
Sep 28 08:04:25 kernel: [ 0.000000] If you got timer trouble try acpi_use_timer_override
Sep 28 08:04:25 kernel: [ 0.000000] Detected use of extended apic ids on hypertransport bus
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x2008
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 28 08:04:25 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: IRQ9 used by override.
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: IRQ14 used by override.
Sep 28 08:04:25 kernel: [ 0.000000] ACPI: IRQ15 used by override.
Sep 28 08:04:25 kernel: [ 0.000000] Setting APIC routing to flat
Sep 28 08:04:25 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Sep 28 08:04:25 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 28 08:04:25 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Sep 28 08:04:25 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Sep 28 08:04:25 kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7fffe000:7ec02000)
Sep 28 08:04:25 kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Sep 28 08:04:25 kernel: [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
Sep 28 08:04:25 kernel: [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
Sep 28 08:04:25 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515713
Sep 28 08:04:25 kernel: [ 0.000000] Policy zone: DMA32
Sep 28 08:04:25 kernel: [ 0.000000] Kernel command line: vga=normal initrd=initrd.gz -- quiet BOOT_IMAGE=linux
Sep 28 08:04:25 kernel: [ 0.000000] Initializing CPU#0
Sep 28 08:04:25 kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Sep 28 08:04:25 kernel: [ 0.000000] TSC calibrated against PM_TIMER
Sep 28 08:04:25 kernel: [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
Sep 28 08:04:25 kernel: [ 0.000000] time.c: Detected 1989.856 MHz processor.
Sep 28 08:04:25 kernel: [ 0.004000] spurious 8259A interrupt: IRQ7.
Sep 28 08:04:25 kernel: [ 0.004000] Console: colour VGA+ 80x25
Sep 28 08:04:25 kernel: [ 0.004000] console [tty0] enabled
Sep 28 08:04:25 kernel: [ 0.004000] Checking aperture...
Sep 28 08:04:25 kernel: [ 0.004000] Node 0: aperture @ 2e2e000000 size 32 MB
Sep 28 08:04:25 kernel: [ 0.004000] Aperture beyond 4GB. Ignoring.
Sep 28 08:04:25 kernel: [ 0.004000] No AGP bridge found
Sep 28 08:04:25 kernel: [ 0.004000] Memory: 2057808k/2096896k available (2228k kernel code, 38700k reserved, 1081k data, 392k init)
Sep 28 08:04:25 kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Sep 28 08:04:25 kernel: [ 0.084083] Calibrating delay using timer specific routine.. 3984.27 BogoMIPS (lpj=7968543)
Sep 28 08:04:25 kernel: [ 0.084138] Security Framework initialized
Sep 28 08:04:25 kernel: [ 0.084143] SELinux: Disabled at boot.
Sep 28 08:04:25 kernel: [ 0.084146] Capability LSM initialized
Sep 28 08:04:25 kernel: [ 0.084373] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 28 08:04:25 kernel: [ 0.085439] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 28 08:04:25 kernel: [ 0.085957] Mount-cache hash table entries: 256
Sep 28 08:04:25 kernel: [ 0.086118] Initializing cgroup subsys ns
Sep 28 08:04:25 kernel: [ 0.086122] Initializing cgroup subsys cpuacct
Sep 28 08:04:25 kernel: [ 0.086125] Initializing cgroup subsys devices
Sep 28 08:04:25 kernel: [ 0.086146] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Sep 28 08:04:25 kernel: [ 0.086149] CPU: L2 Cache: 512K (64 bytes/line)
Sep 28 08:04:25 kernel: [ 0.086152] CPU 0/0 -> Node 0
Sep 28 08:04:25 kernel: [ 0.086163] CPU: Physical Processor ID: 0
Sep 28 08:04:25 kernel: [ 0.086165] CPU: Processor Core ID: 0
Sep 28 08:04:25 kernel: [ 0.086888] ACPI: Core revision 20080321
Sep 28 08:04:25 kernel: [ 0.137726] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Sep 28 08:04:25 kernel: [ 0.137731] Using local APIC timer interrupts.
Sep 28 08:04:25 kernel: [ 0.144009] APIC timer calibration result 12436603
Sep 28 08:04:25 kernel: [ 0.144009] Detected 12.436 MHz APIC timer.
Sep 28 08:04:25 kernel: [ 0.144009] Booting processor 1/1 ip 6000
Sep 28 08:04:25 kernel: [ 0.152009] Initializing CPU#1
Sep 28 08:04:25 kernel: [ 0.152009] Calibrating delay using timer specific routine.. 3979.78 BogoMIPS (lpj=7959576)
Sep 28 08:04:25 kernel: [ 0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Sep 28 08:04:25 kernel: [ 0.152009] CPU: L2 Cache: 512K (64 bytes/line)
Sep 28 08:04:25 kernel: [ 0.152009
Sep 28 08:04:25 kernel: ] CPU 1/1 -> Node 0
Sep 28 08:04:25 kernel: [ 0.152009] CPU: Physical Processor ID: 0
Sep 28 08:04:25 kernel: [ 0.152009] CPU: Processor Core ID: 1
Sep 28 08:04:25 kernel: [ 0.231930] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Sep 28 08:04:25 kernel: [ 0.231943] Brought up 2 CPUs
Sep 28 08:04:25 kernel: [ 0.231946] Total of 2 processors activated (7964.05 BogoMIPS).
Sep 28 08:04:25 kernel: [ 0.232014] CPU0 attaching sched-domain:
Sep 28 08:04:25 kernel: [ 0.232014] domain 0: span 0-1
Sep 28 08:04:25 kernel: [ 0.232014] groups: 0 1
Sep 28 08:04:25 kernel: [ 0.232014] domain 1: span 0-1
Sep 28 08:04:25 kernel: [ 0.232014] groups: 0-1
Sep 28 08:04:25 kernel: [ 0.232014] CPU1 attaching sched-domain:
Sep 28 08:04:25 kernel: [ 0.232014] domain 0: span 0-1
Sep 28 08:04:25 kernel: [ 0.232014] groups: 1 0
Sep 28 08:04:25 kernel: [ 0.232014] domain 1: span 0-1
Sep 28 08:04:25 kernel: [ 0.232014] groups: 0-1
Sep 28 08:04:25 kernel: [ 0.232014] net_namespace: 1224 bytes
Sep 28 08:04:25 kernel: [ 0.232014] Booting paravirtualized kernel on bare hardware
Sep 28 08:04:25 kernel: [ 0.232014] NET: Registered protocol family 16
Sep 28 08:04:25 kernel: [ 0.232014] node 0 link 0: io port [1000, ffffff]
Sep 28 08:04:25 kernel: [ 0.232014] node 0 link 0: io port [2000, 2fff]
Sep 28 08:04:25 kernel: [ 0.232014] TOM: 0000000080000000 aka 2048M
Sep 28 08:04:25 kernel: [ 0.232014] node 0 link 0: mmio [e0000000, efffffff]
Sep 28 08:04:25 kernel: [ 0.232014] node 0 link 0: mmio [a0000, bffff]
Sep 28 08:04:25 kernel: [ 0.232014] node 0 link 0: mmio [80000000, fe0bffff]
Sep 28 08:04:25 kernel: [ 0.232014] bus: [00,ff] on node 0 link 0
Sep 28 08:04:25 kernel: [ 0.232014] bus: 00 index 0 io port: [0, ffff]
Sep 28 08:04:25 kernel: [ 0.232014] bus: 00 index 1 mmio: [80000000, fcffffffff]
Sep 28 08:04:25 kernel: [ 0.232014] bus: 00 index 2 mmio: [a0000, bffff]
Sep 28 08:04:25 kernel: [ 0.232014] ACPI: bus type pci registered
Sep 28 08:04:25 kernel: [ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep 28 08:04:25 kernel: [ 0.232014] PCI: Not using MMCONFIG.
Sep 28 08:04:25 kernel: [ 0.232014] PCI: Using configuration type 1 for base access
Sep 28 08:04:25 kernel: [ 0.232014] ACPI: EC: Look up EC in DSDT
Sep 28 08:04:25 kernel: [ 0.241876] ACPI: Interpreter enabled
Sep 28 08:04:25 kernel: [ 0.241879] ACPI: (supports S0 S1 S3 S4 S5)
Sep 28 08:04:25 kernel: [ 0.241898] ACPI: Using IOAPIC for interrupt routing
Sep 28 08:04:25 kernel: [ 0.241955] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Sep 28 08:04:25 kernel: [ 0.247133] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Sep 28 08:04:25 kernel: [ 0.263602] PCI: Using MMCONFIG at e0000000 - efffffff
Sep 28 08:04:25 kernel: [ 0.272017] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 28 08:04:25 kernel: [ 0.272017] PCI: Transparent bridge - 0000:00:08.0
Sep 28 08:04:25 kernel: [ 0.272261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep 28 08:04:25 kernel: [ 0.274037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Sep 28 08:04:25 kernel: [ 0.274245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
Sep 28 08:04:25 kernel: [ 0.274366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
Sep 28 08:04:25 kernel: [ 0.274486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
Sep 28 08:04:25 kernel: [ 0.274606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
Sep 28 08:04:25 kernel: [ 0.283393] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.283650] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.283905] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.284159] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.284417] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *7
Sep 28 08:04:25 kernel: [ 0.284671] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.284925] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.285183] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
Sep 28 08:04:25 kernel: [ 0.285441] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7
Sep 28 08:04:25 kernel: [ 0.285450] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
Sep 28 08:04:25 kernel: [ 0.285450] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.285450] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
Sep 28 08:04:25 kernel: [ 0.285712] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
Sep 28 08:04:25 kernel: [ 0.286547] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.286806] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
Sep 28 08:04:25 kernel: [ 0.287101] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.287356] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.287611] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
Sep 28 08:04:25 kernel: [ 0.287992] Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 28 08:04:25 kernel: [ 0.288135] pnp: PnP ACPI init
Sep 28 08:04:25 kernel: [ 0.288143] ACPI: bus type pnp registered
Sep 28 08:04:25 kernel: [ 0.288162] pnp 00:00: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.288310] pnp 00:00: add io 0xcf8-0xcff flags 0x1
Sep 28 08:04:25 kernel: [ 0.288474] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Sep 28 08:04:25 kernel: [ 0.288493] pnp 00:01: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.288501] pnp 00:01: add dma 4 flags 0x4
Sep 28 08:04:25 kernel: [ 0.288504] pnp 00:01: add io 0x0-0xf flags 0x1
Sep 28 08:04:25 kernel: [ 0.288506] pnp 00:01: add io 0x81-0x83 flags 0x1
Sep 28 08:04:25 kernel: [ 0.288509] pnp 00:01: add io 0x87-0x87 flags 0x1
Sep 28 08:04:25 kernel: [ 0.288511] pnp 00:01: add io 0x89-0x8b flags 0x1
Sep 28 08:04:25 kernel: [ 0.288513] pnp 00:01: add io 0x8f-0x8f flags 0x1
Sep 28 08:04:25 kernel: [ 0.288516] pnp 00:01: add io 0xc0-0xdf flags 0x1
Sep 28 08:04:25 kernel: [ 0.288669] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Sep 28 08:04:25 kernel: [ 0.288684] pnp 00:02: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.288689] pnp 00:02: add io 0x61-0x61 flags 0x1
Sep 28 08:04:25 kernel: [ 0.288842] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
Sep 28 08:04:25 kernel: [ 0.288857] pnp 00:03: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.288862] pnp 00:03: add io 0xf0-0xff flags 0x1
Sep 28 08:04:25 kernel: [ 0.288874] pnp 00:03: add irq 13 flags 0x1
Sep 28 08:04:25 kernel: [ 0.289025] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x10-0x1f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x22-0x3f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x44-0x4d flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x50-0x5f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x62-0x63 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x65-0x6f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x72-0x7f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x80-0x80 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x84-0x86 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x88-0x88 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x8c-0x8e flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x90-0x9f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0xa2-0xbf flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0xe0-0xef flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x800-0x80f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2000-0x207f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2080-0x20ff flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2400-0x247f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2480-0x24ff flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2800-0x287f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2880-0x28ff flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2c00-0x2c7f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add io 0x2c80-0x2cff flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add mem 0xfec80000-0x1fd93ffff flags 0x0
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:05: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:05: add io 0x70-0x71 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:05: add irq 8 flags 0x1
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
Sep 28 08:04:25 kernel: [ 0.290031] pnp 00:06: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.290182] pnp 00:06: add io 0x60-0x60 flags 0x0
Sep 28 08:04:25 kernel: [ 0.290184] pnp 00:06: add io 0x64-0x64 flags 0x0
Sep 28 08:04:25 kernel: [ 0.290187] pnp 00:06: add mem 0xfec00000-0xfec00fff flags 0x0
Sep 28 08:04:25 kernel: [ 0.290189] pnp 00:06: add mem 0xfee00000-0xfee00fff flags 0x0
Sep 28 08:04:25 kernel: [ 0.290192] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Sep 28 08:04:25 kernel: [ 0.290370] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 28 08:04:25 kernel: [ 0.290472] pnp 00:07: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.290636] pnp 00:07: add io 0x0-0xffffffffffffffff flags 0x10000001
Sep 28 08:04:25 kernel: [ 0.290639] pnp 00:07: add io 0xa00-0xa0f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290642] pnp 00:07: add io 0xa10-0xa1f flags 0x1
Sep 28 08:04:25 kernel: [ 0.290645] pnp 00:07: PNP0c02: calling quirk_sys
Sep 28 08:04:25 kernel: tem_pci_resources+0x0/0x15c
Sep 28 08:04:25 kernel: [ 0.290821] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 28 08:04:25 kernel: [ 0.290879] pnp 00:08: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.290946] pnp 00:08: add mem 0xe0000000-0xefffffff flags 0x0
Sep 28 08:04:25 kernel: [ 0.290950] pnp 00:08: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
Sep 28 08:04:25 kernel: [ 0.291133] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 28 08:04:25 kernel: [ 0.291222] pnp 00:09: parse allocated resources
Sep 28 08:04:25 kernel: [ 0.291429] pnp 00:09: add mem 0x0-0x9ffff flags 0x1
Sep 28 08:04:25 kernel: [ 0.291431] pnp 00:09: add mem 0xc0000-0xcffff flags 0x0
Sep 28 08:04:25 kernel: [ 0.291434] pnp 00:09: add mem 0xe0000-0xfffff flags 0x0
Sep 28 08:04:25 kernel: [ 0.291437] pnp 00:09: add mem 0x100000-0x7fffffff flags 0x1
Sep 28 08:04:25 kernel: [ 0.291439] pnp 00:09: add mem 0xfec00000-0xffffffff flags 0x0
Sep 28 08:04:25 kernel: [ 0.291443] pnp 00:09: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
Sep 28 08:04:25 kernel: [ 0.291623] pnp 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 28 08:04:25 kernel: [ 0.292821] pnp: PnP ACPI: found 10 devices
Sep 28 08:04:25 kernel: [ 0.292823] ACPI: ACPI bus type pnp unregistered
Sep 28 08:04:25 kernel: [ 0.293831] usbcore: registered new interface driver usbfs
Sep 28 08:04:25 kernel: [ 0.294031] usbcore: registered new interface driver hub
Sep 28 08:04:25 kernel: [ 0.294031] usbcore: registered new device driver usb
Sep 28 08:04:25 kernel: [ 0.294031] PCI: Using ACPI for IRQ routing
Sep 28 08:04:25 kernel: [ 0.314032] ACPI: RTC can wake from S4
Sep 28 08:04:25 kernel: [ 0.329853] pnp: the driver 'system' has been registered
Sep 28 08:04:25 kernel: [ 0.329866] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
Sep 28 08:04:25 kernel: [ 0.329869] system 00:04: ioport range 0x800-0x80f has been reserved
Sep 28 08:04:25 kernel: [ 0.329872] system 00:04: ioport range 0x2000-0x207f has been reserved
Sep 28 08:04:25 kernel: [ 0.329876] system 00:04: ioport range 0x2080-0x20ff has been reserved
Sep 28 08:04:25 kernel: [ 0.329879] system 00:04: ioport range 0x2400-0x247f has been reserved
Sep 28 08:04:25 kernel: [ 0.329882] system 00:04: ioport range 0x2480-0x24ff has been reserved
Sep 28 08:04:25 kernel: [ 0.329886] system 00:04: ioport range 0x2800-0x287f has been reserved
Sep 28 08:04:25 kernel: [ 0.329889] system 00:04: ioport range 0x2880-0x28ff has been reserved
Sep 28 08:04:25 kernel: [ 0.329892] system 00:04: ioport range 0x2c00-0x2c7f has been reserved
Sep 28 08:04:25 kernel: [ 0.329896] system 00:04: ioport range 0x2c80-0x2cff has been reserved
Sep 28 08:04:25 kernel: [ 0.329900] system 00:04: iomem range 0xfec80000-0x1fd93ffff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329904] system 00:04: iomem range 0xfee01000-0xfeefffff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329907] system 00:04: driver attached
Sep 28 08:04:25 kernel: [ 0.329916] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329919] system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329922] system 00:06: driver attached
Sep 28 08:04:25 kernel: [ 0.329928] system 00:07: ioport range 0xa00-0xa0f has been reserved
Sep 28 08:04:25 kernel: [ 0.329932] system 00:07: ioport range 0xa10-0xa1f has been reserved
Sep 28 08:04:25 kernel: [ 0.329936] system 00:07: driver attached
Sep 28 08:04:25 kernel: [ 0.329943] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
Sep 28 08:04:25 kernel: [ 0.329946] system 00:08: driver attached
Sep 28 08:04:25 kernel: [ 0.329953] system 00:09: iomem range 0x0-0x9ffff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329956] system 00:09: iomem range 0xc0000-0xcffff has been reserved
Sep 28 08:04:25 kernel: [ 0.329960] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329963] system 00:09: iomem range 0x100000-0x7fffffff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329967] system 00:09: iomem range 0xfec00000-0xffffffff could not be reserved
Sep 28 08:04:25 kernel: [ 0.329969] system 00:09: driver attached
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Bridge: 0000:00:08.0
Sep 28 08:04:25 kernel: [ 0.330033] IO window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] MEM window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PREFETCH window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Bridge: 0000:00:0b.0
Sep 28 08:04:25 kernel: [ 0.330033] IO window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] MEM window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PREFETCH window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Bridge: 0000:00:0c.0
Sep 28 08:04:25 kernel: [ 0.330033] IO window: e000-efff
Sep 28 08:04:25 kernel: [ 0.330033] MEM window: 0xfbf00000-0xfbffffff
Sep 28 08:04:25 kernel: [ 0.330033] PREFETCH window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Bridge: 0000:00:0d.0
Sep 28 08:04:25 kernel: [ 0.330033] IO window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] MEM window: 0xfc000000-0xfebfffff
Sep 28 08:04:25 kernel: [ 0.330033] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Bridge: 0000:00:0e.0
Sep 28 08:04:25 kernel: [ 0.330033] IO window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] MEM window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PREFETCH window: disabled.
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Setting latency timer of device 0000:00:08.0 to 64
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Setting latency timer of device 0000:00:0c.0 to 64
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Sep 28 08:04:25 kernel: [ 0.330033] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Sep 28 08:04:25 kernel: [ 0.330033] NET: Registered protocol family 2
Sep 28 08:04:25 kernel: [ 0.333256] Switched to high resolution mode on CPU 0
Sep 28 08:04:25 kernel: [ 0.336874] Switched to high resolution mode on CPU 1
Sep 28 08:04:25 kernel: [ 0.365820] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Sep 28 08:04:25 kernel: [ 0.369682] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Sep 28 08:04:25 kernel: [ 0.369682] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 28 08:04:25 kernel: [ 0.369682] TCP: Hash tables configured (established 262144 bind 65536)
Sep 28 08:04:25 kernel: [ 0.369682] TCP reno registered
Sep 28 08:04:25 kernel: [ 0.378351] NET: Registered protocol family 1
Sep 28 08:04:25 kernel: [ 0.378462] checking if image is initramfs... it is
Sep 28 08:04:25 kernel: [ 0.773169] Freeing initrd memory: 5177k freed
Sep 28 08:04:25 kernel: [ 0.777969] audit: initializing netlink socket (disabled)
Sep 28 08:04:25 kernel: [ 0.777969] type=2000 audit(1254125059.768:1): initialized
Sep 28 08:04:25 kernel: [ 0.777969] Total HugeTLB memory allocated, 0
Sep 28 08:04:25 kernel: [ 0.777969] VFS: Disk quotas dquot_6.5.1
Sep 28 08:04:25 kernel: [ 0.777969] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 28 08:04:25 kernel: [ 0.777969] msgmni has been set to 4029
Sep 28 08:04:25 kernel: [ 0.777969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep 28 08:04:25 kernel: [ 0.777969] io scheduler noop registered
Sep 28 08:04:25 kernel: [ 0.777969] io scheduler anticipatory registered
Sep 28 08:04:25 kernel: [ 0.777969] io scheduler deadline registered
Sep 28 08:04:25 kernel: [ 0.777969] io scheduler cfq registered (default)
Sep 28 08:04:25 kernel: [ 0.777969] pci 0000:00:00.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.799464] pci 0000:00:07.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.799479] pci 0000:00:08.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.799505] pci 0000:00:0a.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.800509] pci 0000:00:0b.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.800524] pci 0000:00:0c.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.800547] pci 0000:00:0d.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.800562] pci 0000:00:0e.0: Enabling HT MSI Mapping
Sep 28 08:04:25 kernel: [ 0.800586] pci 0000:04:00.0: Boot video device
Sep 28 08:04:25 kernel: [ 0.801238] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Sep 28 08:04:25 kernel: [ 0.801258] assign_interrupt_mode Found MSI capability
Sep 28 08:04:25 kernel: [ 0.801277] Allocate Port Service[0000:00:0b.0:pcie00]
Sep 28 08:04:25 kernel: [ 0.801877] Allocate Port Service[0000:00:0b.0:pcie03]
Sep 28 08:04:25 kernel: [ 0.802500] PCI: Setting latency timer of device 0000:00:0c.0 to 64
Sep 28 08:04:25 kernel: [ 0.802519] assign_interrupt_mode Found MSI capability
Sep 28 08:04:25 kernel: [ 0.802534] Allocate Port Service[0000:00:0c.0:pcie00]
Sep 28 08:04:25 kernel: [ 0.803132] Allocate Port Service[0000:00:0c.0:pcie03]
Sep 28 08:04:25 kernel: [ 0.803753] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Sep 28 08:04:25 kernel: [ 0.803772] assign_interrupt_mode Found MSI capability
Sep 28 08:04:25 kernel: [ 0.803787] Allocate Port Service[0000:00:0d.0:pcie00]
Sep 28 08:04:25 kernel: [ 0.803817] Allocate Port Service[0000:00:0d.0:pcie03]
Sep 28 08:04:25 kernel: [ 0.803817] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Sep 28 08:04:25 kernel: [ 0.803817] assign_interrupt_mode Found MSI capability
Sep 28 08:04:25 kernel: [ 0.803817] Allocate Port Service[0000:00:0e.0:pcie00]
Sep 28 08:04:25 kernel: [ 0.803817] Allocate Port Service[0000:00:0e.0:pcie03]
Sep 28 08:04:25 kernel: [ 0.806958] Linux agpgart interface v0.103
Sep 28 08:04:25 kernel: [ 0.806958] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Sep 28 08:04:25 kernel: [ 0.806958] pnp: the driver 'serial' has been registered
Sep 28 08:04:25 kernel: [ 0.806958] brd: module loaded
Sep 28 08:04:25 kernel: [ 0.806958] input: Macintosh mouse button emulation as /class/input/input0
Sep 28 08:04:25 kernel: [ 0.806958] pnp: the driver 'i8042 kbd' has been registered
Sep 28 08:04:25 kernel: [ 0.806958] pnp: the driver 'i8042 aux' has been registered
Sep 28 08:04:25 kernel: [ 0.806958] pnp: the driver 'i8042 kbd' has been unregistered
Sep 28 08:04:25 kernel: [ 0.808968] pnp: the driver 'i8042 aux' has been unregistered
Sep 28 08:04:25 kernel: [
Sep 28 08:04:25 kernel: 0.808970] PNP: No PS/2 controller found. Probing ports directly.
Sep 28 08:04:25 kernel: [ 0.810914] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 28 08:04:25 kernel: [ 0.810922] serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 28 08:04:25 kernel: [ 0.841282] mice: PS/2 mouse device common for all mice
Sep 28 08:04:25 kernel: [ 0.841282] pnp: the driver 'rtc_cmos' has been registered
Sep 28 08:04:25 kernel: [ 0.841282] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
Sep 28 08:04:25 kernel: [ 0.841282] rtc0: alarms up to one year, y3k
Sep 28 08:04:25 kernel: [ 0.841282] rtc_cmos 00:05: driver attached
Sep 28 08:04:25 kernel: [ 0.841282] cpuidle: using governor ladder
Sep 28 08:04:25 kernel: [ 0.841282] cpuidle: using governor menu
Sep 28 08:04:25 kernel: [ 0.841282] No iBFT detected.
Sep 28 08:04:25 kernel: [ 0.841282] TCP cubic registered
Sep 28 08:04:25 kernel: [ 0.841282] NET: Registered protocol family 17
Sep 28 08:04:25 kernel: [ 0.841282] registered taskstats version 1
Sep 28 08:04:25 kernel: [ 0.841282] rtc_cmos 00:05: setting system clock to 2009-09-28 08:04:20 UTC (1254125060)
Sep 28 08:04:25 kernel: [ 0.841282] Freeing unused kernel memory: 392k freed
Sep 28 08:04:25 kernel: [ 0.957254] ACPI: ACPI0007:00 is registered as cooling_device0
Sep 28 08:04:25 kernel: [ 0.957254] ACPI: ACPI0007:01 is registered as cooling_device1
Sep 28 08:04:25 kernel: [ 1.050103] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 28 08:04:25 kernel: [ 1.050523] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
Sep 28 08:04:25 kernel: [ 1.050532] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23
Sep 28 08:04:25 kernel: [ 1.050548] PCI: Setting latency timer of device 0000:00:02.0 to 64
Sep 28 08:04:25 kernel: [ 1.050551] ohci_hcd 0000:00:02.0: OHCI Host Controller
Sep 28 08:04:25 kernel: [ 1.050686] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Sep 28 08:04:25 kernel: [ 1.050706] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfbeff000
Sep 28 08:04:25 kernel: [ 1.052654] No dock devices found.
Sep 28 08:04:25 kernel: [ 1.060415] SCSI subsystem initialized
Sep 28 08:04:25 kernel: [ 1.080657] Uniform Multi-Platform E-IDE driver
Sep 28 08:04:25 kernel: [ 1.080657] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 28 08:04:25 kernel: [ 1.086110] libata version 3.00 loaded.
Sep 28 08:04:25 kernel: [ 1.110078] usb usb1: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 1.110113] hub 1-0:1.0: USB hub found
Sep 28 08:04:25 kernel: [ 1.110123] hub 1-0:1.0: 10 ports detected
Sep 28 08:04:25 kernel: [ 1.210672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Sep 28 08:04:25 kernel: [ 1.210676] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 28 08:04:25 kernel: [ 1.210679] usb usb1: Product: OHCI Host Controller
Sep 28 08:04:25 kernel: [ 1.210681] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
Sep 28 08:04:25 kernel: [ 1.210683] usb usb1: SerialNumber: 0000:00:02.0
Sep 28 08:04:25 kernel: [ 1.211268] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
Sep 28 08:04:25 kernel: [ 1.211277] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
Sep 28 08:04:25 kernel: [ 1.211292] PCI: Setting latency timer of device 0000:00:02.1 to 64
Sep 28 08:04:25 kernel: [ 1.211295] ehci_hcd 0000:00:02.1: EHCI Host Controller
Sep 28 08:04:25 kernel: [ 1.211359] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Sep 28 08:04:25 kernel: [ 1.211396] ehci_hcd 0000:00:02.1: debug port 1
Sep 28 08:04:25 kernel: [ 1.211400] PCI: cache line size of 64 is not supported by device 0000:00:02.1
Sep 28 08:04:25 kernel: [ 1.211414] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfbefec00
Sep 28 08:04:25 kernel: [ 1.223538] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 28 08:04:25 kernel: [ 1.223614] usb usb2: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 1.223645] hub 2-0:1.0: USB hub found
Sep 28 08:04:25 kernel: [ 1.223654] hub 2-0:1.0: 10 ports detected
Sep 28 08:04:25 kernel: [ 1.326625] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Sep 28 08:04:25 kernel: [ 1.326628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sep 28 08:04:25 kernel: [ 1.326631] usb usb2: Product: EHCI Host Controller
Sep 28 08:04:25 kernel: [ 1.326633] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
Sep 28 08:04:25 kernel: [ 1.326635] usb usb2: SerialNumber: 0000:00:02.1
Sep 28 08:04:25 kernel: [ 1.326736] NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
Sep 28 08:04:25 kernel: [ 1.326739] NFORCE-MCP65: IDE controller (0x10de:0x0448 rev 0xa1) at PCI slot 0000:00:09.0
Sep 28 08:04:25 kernel: [ 1.326755] NFORCE-MCP65: not 100% native mode: will probe irqs later
Sep 28 08:04:25 kernel: [ 1.326762] NFORCE-MCP65: IDE port disabled
Sep 28 08:04:25 kernel: [ 1.326767] ide0: BM-DMA at 0xffa0-0xffa7
Sep 28 08:04:25 kernel: [ 1.326773] Probing IDE interface ide0...
Sep 28 08:04:25 kernel: [ 1.707501] usb 2-2: new high speed USB device using ehci_hcd and address 2
Sep 28 08:04:25 kernel: [ 1.844264] usb 2-2: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 1.844485] hub 2-2:1.0: USB hub found
Sep 28 08:04:25 kernel: [ 1.844702] hub 2-2:1.0: 4 ports detected
Sep 28 08:04:25 kernel: [ 1.946052] usb 2-2: New USB device found, idVendor=0409, idProduct=005a
Sep 28 08:04:25 kernel: [ 1.946055] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 28 08:04:25 kernel: [ 2.066059] hda: TSSTcorpCD/DVDW SH-S182M, ATAPI CD/DVD-ROM drive
Sep 28 08:04:25 kernel: [ 2.186961] usb 2-5: new high speed USB device using ehci_hcd and address 3
Sep 28 08:04:25 kernel: [ 2.321954] usb 2-5: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 2.321954] usb 2-5: New USB device found, idVendor=13fe, idProduct=1d23
Sep 28 08:04:25 kernel: [ 2.321954] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 28 08:04:25 kernel: [ 2.321954] usb 2-5: Product: ATTACHE PRO
Sep 28 08:04:25 kernel: [ 2.321954] usb 2-5: Manufacturer: PNY
Sep 28 08:04:25 kernel: [ 2.321954] usb 2-5: SerialNumber: 07750E180008
Sep 28 08:04:25 kernel: [ 2.538293] usb 2-2.1: new low speed USB device using ehci_hcd and address 4
Sep 28 08:04:25 kernel: [ 2.653225] usb 2-2.1: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 2.655770] usb 2-2.1: New USB device found, idVendor=0458, idProduct=002e
Sep 28 08:04:25 kernel: [ 2.655773] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 28 08:04:25 kernel: [ 2.655776] usb 2-2.1: Product: NetScroll+ Traveler
Sep 28 08:04:25 kernel: [ 2.655778] usb 2-2.1: Manufacturer: KYE
Sep 28 08:04:25 kernel: [ 2.743130] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Sep 28 08:04:25 kernel: [ 2.743465] hda: UDMA/33 mode selected
Sep 28 08:04:25 kernel: [ 2.743912] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 28 08:04:25 kernel: [ 2.746590] ahci 0000:00:0a.0: version 3.0
Sep 28 08:04:25 kernel: [ 2.746978] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
Sep 28 08:04:25 kernel: [ 2.746986] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 21
Sep 28 08:04:25 kernel: [ 2.882881] usb 2-2.2: new high speed USB device using ehci_hcd and address 5
Sep 28 08:04:25 kernel: [ 2.999434] usb 2-2.2: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 2.999655] hub 2-2.2:1.0: USB hub found
Sep 28 08:04:25 kernel: [ 2.999754] hub 2-2.2:1.0: 3 ports detected
Sep 28 08:04:25 kernel: [ 3.101947] usb 2-2.2: New USB device found, idVendor=05ac, idProduct=1006
Sep 28 08:04:25 kernel: [ 3.101950] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 28 08:04:25 kernel: [ 3.101953] usb 2-2.2: Product: Keyboard Hub
Sep 28 08:04:25 kernel: [ 3.101955] usb 2-2.2: Manufacturer: Apple, Inc.
Sep 28 08:04:25 kernel: [ 3.101956] usb 2-2.2: SerialNumber: 000000000000
Sep 28 08:04:25 kernel: [ 3.302007] usb 2-2.2.2: new low speed USB device using ehci_hcd and address 6
Sep 28 08:04:25 kernel: [ 3.402287] usb 2-2.2.2: configuration #1 chosen from 1 choice
Sep 28 08:04:25 kernel: [ 3.402784] usb 2-2.2.2: New USB device found, idVendor=05ac, idProduct=0221
Sep 28 08:04:25 kernel: [ 3.402787] usb 2-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 28 08:04:25 kernel: [ 3.402790] usb 2-2.2.2: Product: Apple Keyboard
Sep 28 08:04:25 kernel: [ 3.402792] usb 2-2.2.2: Manufacturer: Apple, Inc
Sep 28 08:04:25 kernel: [ 3.757864] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
Sep 28 08:04:25 kernel: [ 3.757868] ahci 0000:00:0a.0: flags: 64bit ncq sntf pm led clo pmp pio
Sep 28 08:04:25 kernel: [ 3.757872] PCI: Setting latency timer of device 0000:00:0a.0 to 64
Sep 28 08:04:25 kernel: [ 3.761845] scsi0 : ahci
Sep 28 08:04:25 kernel: [ 3.761845] scsi1 : ahci
Sep 28 08:04:25 kernel: [ 3.761845] scsi2 : ahci
Sep 28 08:04:25 kernel: [ 3.761845] scsi3 : ahci
Sep 28 08:04:25 kernel: [ 3.761845] ata1: SATA max UDMA/133 abar m8192@0xfbefc000 port 0xfbefc100 irq 1275
Sep 28 08:04:25 kernel: [ 3.761845] ata2: SATA max UDMA/133 abar m8192@0xfbefc000 port 0xfbefc180 irq 1275
Sep 28 08:04:25 kernel: [ 3.761845] ata3: SATA max UDMA/133 abar m8192@0xfbefc000 port 0xfbefc200 irq 1275
Sep 28 08:04:25 kernel: [ 3.761845] ata4: SATA max UDMA/133 abar m8192@0xfbefc000 port 0xfbefc280 irq 1275
Sep 28 08:04:25 kernel: [ 4.086641] ata1: SATA link down (SStatus 0 SControl 300)
Sep 28 08:04:25 kernel: [ 4.450725] ata2: SATA link down (SStatus 0 SControl 300)
Sep 28 08:04:25 kernel: [ 4.954118] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 28 08:04:25 kernel: [ 4.970670] ata3.00: ATA-7: Maxtor 6V250F0, VA111900, max UDMA/133
Sep 28 08:04:25 kernel: [ 4.970670] ata3.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
Sep 28 08:04:25 kernel: [ 4.970670] ata3.00: configured for UDMA/133
Sep 28 08:04:25 kernel: [ 5.335685] ata4: SATA link down (SStatus 0 SControl 300)
Sep 28 08:04:25 kernel: [ 5.387664] scsi 2:0:0:0: Direct-Access ATA Maxtor 6V250F0 VA11 PQ: 0 ANSI: 5
Sep 28 08:04:25 kernel: [ 5.405015] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Sep 28 08:04:25 kernel: [ 5.405015] Uniform CD-ROM driver Revision: 3.20
Sep 28 08:04:25 kernel: [ 5.41265
Sep 28 08:04:25 kernel: 5] Driver 'sd' needs updating - please use bus_type methods
Sep 28 08:04:25 kernel: [ 5.412655] sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
Sep 28 08:04:25 kernel: [ 5.412655] sd 2:0:0:0: [sda] Write Protect is off
Sep 28 08:04:25 kernel: [ 5.412655] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 28 08:04:25 kernel: [ 5.412656] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 28 08:04:25 kernel: [ 5.412656] sd 2:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB)
Sep 28 08:04:25 kernel: [ 5.412656] sd 2:0:0:0: [sda] Write Protect is off
Sep 28 08:04:25 kernel: [ 5.412656] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 28 08:04:25 kernel: [ 5.412656] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 28 08:04:25 kernel: [ 5.412656] sda:<6>Initializing USB Mass Storage driver...
Sep 28 08:04:25 kernel: [ 5.423438] scsi4 : SCSI emulation for USB Mass Storage devices
Sep 28 08:04:25 kernel: [ 5.423438] usb-storage: device found at 3
Sep 28 08:04:25 kernel: [ 5.423438] usb-storage: waiting for device to settle before scanning
Sep 28 08:04:25 kernel: [ 5.423438] usbcore: registered new interface driver usb-storage
Sep 28 08:04:25 kernel: [ 5.423438] USB Mass Storage support registered.
Sep 28 08:04:25 kernel: [ 5.439441] usbcore: registered new interface driver hiddev
Sep 28 08:04:25 kernel: [ 5.439441] sda1 sda2 sda3 sda4
Sep 28 08:04:25 kernel: [ 5.443441] input: KYE NetScroll+ Traveler as /class/input/input1
Sep 28 08:04:25 kernel: [ 5.456501] input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:02.1-2.1
Sep 28 08:04:25 kernel: [ 5.463942] input: Apple, Inc Apple Keyboard as /class/input/input2
Sep 28 08:04:25 kernel: [ 5.468373] sd 2:0:0:0: [sda] Attached SCSI disk
Sep 28 08:04:25 kernel: [ 5.476912] input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-2.2.2
Sep 28 08:04:25 kernel: [ 5.479148] input: Apple, Inc Apple Keyboard as /class/input/input3
Sep 28 08:04:25 kernel: [ 5.507045] input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-2.2.2
Sep 28 08:04:25 kernel: [ 5.507066] usbcore: registered new interface driver usbhid
Sep 28 08:04:25 kernel: [ 5.507070] usbhid: v2.6:USB HID core driver
Sep 28 08:04:25 kernel: [ 6.161849] vga16fb: initializing
Sep 28 08:04:25 kernel: [ 6.161849] vga16fb: mapped to 0xffff8100000a0000
Sep 28 08:04:25 kernel: [ 6.365848] Console: switching to colour frame buffer device 80x30
Sep 28 08:04:25 kernel: [ 6.370554] fb0: VGA16 VGA frame buffer device
Sep 28 08:04:25 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Sep 28 08:04:26 init: init: starting pid 1463, tty '': '/sbin/reopen-console /sbin/debian-installer'
Sep 28 08:04:26 init: init: starting pid 1466, tty '/dev/tty4': '/usr/bin/tail -f /var/log/syslog'
Sep 28 08:04:26 debconf: Setting debconf/language to en
Sep 28 08:04:26 main-menu[1486]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Sep 28 08:04:26 main-menu[1486]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Sep 28 08:04:26 main-menu[1486]: INFO: Menu item 'localechooser' selected
Sep 28 08:04:26 debconf: Setting debconf/language to en
Sep 28 08:04:29 kernel: [ 11.358214] usb-storage: device scan complete
Sep 28 08:04:29 kernel: [ 11.358214] isa bounce pool size: 16 pages
Sep 28 08:04:29 kernel: [ 11.359593] scsi 4:0:0:0: Direct-Access PNY ATTACHE PRO PMAP PQ: 0 ANSI: 0 CCS
Sep 28 08:04:29 kernel: [ 11.371159] sd 4:0:0:0: [sdb] 8058880 512-byte hardware sectors (4126 MB)
Sep 28 08:04:29 kernel: [ 11.372290] sd 4:0:0:0: [sdb] Write Protect is off
Sep 28 08:04:29 kernel: [ 11.372296] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
Sep 28 08:04:29 kernel: [ 11.372299] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Sep 28 08:04:29 kernel: [ 11.380403] sd 4:0:0:0: [sdb] 8058880 512-byte hardware sectors (4126 MB)
Sep 28 08:04:29 kernel: [ 11.383148] sd 4:0:0:0: [sdb] Write Protect is off
Sep 28 08:04:29 kernel: [ 11.383154] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
Sep 28 08:04:29 kernel: [ 11.383157] sd 4:0:0:0: [sdb] Assuming drive cache: write through
Sep 28 08:04:29 kernel: [ 11.383160] sdb:
Sep 28 08:04:29 kernel:
Sep 28 08:04:29 kernel: [ 11.384539] sd 4:0:0:0: [sdb] Attached SCSI removable disk
Sep 28 08:04:32 localechooser: info: Language = 'en'
Sep 28 08:04:32 localechooser: info: line=en;0;US;en_US.UTF-8;;kbd=lat0-sun16(utf8)
Sep 28 08:04:32 localechooser: info: Set debian-installer/language = 'en'
Sep 28 08:04:32 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Sep 28 08:04:32 localechooser: info: Set debian-installer/fallbacklocale = 'en_US.UTF-8'
Sep 28 08:04:32 localechooser: info: Default country = 'US'
Sep 28 08:04:32 localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Sep 28 08:04:32 debconf: Setting debconf/language to en
Sep 28 08:04:38 localechooser: info: Set debian-installer/country = 'DE'
Sep 28 08:04:38 localechooser: info: Falling back to locale 'en_US.UTF-8'
Sep 28 08:04:38 localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Sep 28 08:04:38 localechooser: info: Selected locale (debian-installer/locale) = 'en_US.UTF-8'
Sep 28 08:04:38 main-menu[1486]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Sep 28 08:04:38 main-menu[1486]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Sep 28 08:04:38 main-menu[1486]: INFO: Menu item 'kbd-chooser' selected
Sep 28 08:04:38 main-menu[1486]: INFO: Falling back to the package description for console-keymaps-at
Sep 28 08:04:38 main-menu[1486]: INFO: Falling back to the package description for console-keymaps-at
Sep 28 08:04:38 kbd-chooser[2333]: DEBUG: Mounting usbdevfs to look for kbd
Sep 28 08:04:38 kbd-chooser[2333]: DEBUG: Parsing /proc/bus/usb/devices
Sep 28 08:04:38 kbd-chooser[2333]: DEBUG: Found usb keyboard: 0x843:0x221
Sep 28 08:04:38 kbd-chooser[2333]: DEBUG: non-Apple USB keyboard detected
Sep 28 08:04:38 kbd-chooser[2333]: DEBUG: Forcing keymap list to AT (2.6 kernel)
Sep 28 08:04:38 kbd-chooser[2333]: DEBUG: Adding generic entry for AT keymaps
Sep 28 08:04:38 kbd-chooser[2333]: INFO: keyboard type at: present: false
Sep 28 08:04:38 kbd-chooser[2333]: INFO: keyboard type at: present: unknown
Sep 28 08:04:38 kbd-chooser[2333]: INFO: keyboard type at: present: true:
Sep 28 08:04:38 kbd-chooser[2333]: INFO: Setting debian-installer/serial-console to false
Sep 28 08:04:38 kbd-chooser[2333]: INFO: Setting debian-installer/uml-console to false
Sep 28 08:04:38 kbd-chooser[2333]: INFO: kbd-chooser: arch at selected
Sep 28 08:04:39 kbd-chooser[2333]: INFO: choose_keymap: keymap = us
Sep 28 08:04:39 kbd-chooser[2333]: INFO: kbd_chooser: setting keymap us
Sep 28 08:04:39 main-menu[1486]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Sep 28 08:04:39 main-menu[1486]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Sep 28 08:04:39 main-menu[1486]: INFO: Menu item 'iso-scan' selected
Sep 28 08:04:39 main-menu[1486]: INFO: Falling back to the package description for loop-modules-2.6.26-2-amd64-di
Sep 28 08:04:39 main-menu[1486]: INFO: Falling back to the package description for loop-modules-2.6.26-2-amd64-di
Sep 28 08:04:39 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Sep 28 08:04:39 apt-install: Queueing package udev for later installation
Sep 28 08:04:39 apt-install: Queueing package usbutils for later installation
Sep 28 08:04:39 apt-install: Queueing package acpi for later installation
Sep 28 08:04:39 apt-install: Queueing package acpid for later installation
Sep 28 08:04:39 apt-install: Queueing package acpi-support-base for later installation
Sep 28 08:04:40 apt-install: Queueing package eject for later installation
Sep 28 08:04:41 check-missing-firmware: no missing firmware in /tmp/missing-firmware
Sep 28 08:04:41 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Sep 28 08:04:41 kernel: [ 25.089755] loop: module loaded
Sep 28 08:04:41 iso-scan: First pass: Look for ISOs near top-level of each filesystem.
Sep 28 08:04:41 kernel: [ 25.253205] EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2
Sep 28 08:04:41 iso-scan: Mounted /dev/sda1 for first pass
Sep 28 08:04:41 iso-scan: Failed mounting /dev/sda1
Sep 28 08:04:41 kernel: [ 25.312008] EXT2-fs warning (device sda2): ext2_fill_super: mounting ext3 filesystem as ext2
Sep 28 08:04:41 iso-scan: Mounted /dev/sda2 for first pass
Sep 28 08:04:42 iso-scan: Failed mounting /dev/sda2
Sep 28 08:04:42 kernel: [ 25.807980] EXT2-fs warning (device sda3): ext2_fill_super: mounting ext3 filesystem as ext2
Sep 28 08:04:42 iso-scan: Mounted /dev/sda3 for first pass
Sep 28 08:04:42 iso-scan: Failed mounting /dev/sda3
Sep 28 08:04:42 iso-scan: Waiting for /dev/sda4 to possibly get ready..
Sep 28 08:04:45 iso-scan: Waiting for /dev/sda to possibly get ready..
Sep 28 08:04:48 iso-scan: Mounted /dev/sdb for first pass
Sep 28 08:04:48 iso-scan: Found ISO ./debian-testing-amd64-businesscard.iso on /dev/sdb
Sep 28 08:04:48 iso-scan: Failed mounting ./debian-testing-amd64-businesscard.iso
Sep 28 08:04:48 iso-scan: Failed mounting /dev/sdb
Sep 28 08:05:39 kernel: [ 96.782979] usb 2-2: USB disconnect, address 2
Sep 28 08:05:39 kernel: [ 96.782979] usb 2-2.1: USB disconnect, address 4
Sep 28 08:05:39 kernel: [ 97.231206] usb 2-2.2: USB disconnect, address 5
Sep 28 08:05:39 kernel: [ 97.231212] usb 2-2.2.2: USB disconnect, address 6
Sep 28 08:05:44 kernel: [ 102.406332] usb 2-2: new high speed USB device using ehci_hcd and address 7
Sep 28 08:05:44 kernel: [ 102.540683] usb 2-2: configuration #1 chosen from 1 choice
Sep 28 08:05:44 kernel: [ 102.540783] hub 2-2:1.0: USB hub found
Sep 28 08:05:44 kernel: [ 102.540882] hub 2-2:1.0: 4 ports detected
Sep 28 08:05:44 kernel: [ 103.120919] usb 2-2: New USB device found, idVendor=0409, idProduct=005a
Sep 28 08:05:44 kernel: [ 103.120926] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 28 08:05:44 kernel: [ 103.337658] usb 2-2.1: new low speed USB device using ehci_hcd and address 8
Sep 28 08:05:44 kernel: [ 103.451774] usb 2-2.1: configuration #1 chosen from 1 choice
Sep 28 08:05:44 kernel: [ 103.455671] input: KYE NetScroll+ Traveler as /class/input/input4
Sep 28 08:05:44 kernel: [ 103.491593] input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:02.1-2.1
Sep 28 08:05:44 kernel: [ 103.494408] usb 2-2.1: New USB device found, idVendor=0458, idProduct=002e
Sep 28 08:05:44 kernel: [ 103.494408] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 28 08:05:44 kernel: [ 103.494408] usb 2-2.1: Product: NetScroll+ Traveler
Sep 28 08:05:44 kernel: [ 103.494408] usb 2-2.1: Manufacturer: KYE
Sep 28 08:05:45 kernel: [ 103.710480] usb 2-2.2: new high speed USB device using ehci_hcd and address 9
Sep 28 08:05:45 kernel: [ 103.827041] usb 2-2.2: configuration #1 chosen from 1 choice
Sep 28 08:05:45 kernel: [ 103.827142] hub 2-2.2:1.0: USB hub found
Sep 28 08:05:45 kernel: [ 103.827231] hub 2-2.2:1.0: 3 ports detected
Sep 28 08:05:45 kernel: [ 103.944137] usb 2-2.2: New USB device found, idVendor=05ac, idProduct=1006
Sep 28 08:05:45 kernel: [ 103.944143] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 28 08:05:45 kernel: [ 103.944146] usb 2-2.2: Product: Keyboard Hub
Sep 28 08:05:45 kernel: [ 103.944148] usb 2-2.2: Manufacturer: Apple, Inc.
Sep 28 08:05:45 kernel: [ 103.944150] usb 2-2.2: SerialNumber: 000000000000
Sep 28 08:05:45 kernel: [ 104.148307] usb 2-2.2.2: new low speed USB device using ehci_hcd and address 10
Sep 28 08:05:45 kernel: [ 104.246733] usb 2-2.2.2: configuration #1 chosen from 1 choice
Sep 28 08:05:45 kernel: [ 104.257358] input: Apple, Inc Apple Keyboard as /class/input/input5
Sep 28 08:05:45 kernel: [ 104.280135] input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-2.2.2
Sep 28 08:05:45 kernel: [ 104.282438] input: Apple, Inc Apple Keyboard as /class/input/input6
Sep 28 08:05:45 kernel: [ 104.310289] input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-2.2.2
Sep 28 08:05:45 kernel: [ 104.310400] usb 2-2.2.2: New USB device found, idVendor=05ac, idProduct=0221
Sep 28 08:05:45 kernel: [ 104.310403] usb 2-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 28 08:05:45 kernel: [ 104.310406] usb 2-2.2.2: Product: Apple Keyboard
Sep 28 08:05:45 kernel: [ 104.310408] usb 2-2.2.2: Manufacturer: Apple, Inc
Sep 28 08:05:53 kernel: [ 113.351379] usb 2-2: USB disconnect, address 7
Sep 28 08:05:53 kernel: [ 113.351379] usb 2-2.1: USB disconnect, address 8
Sep 28 08:05:53 kernel: [ 113.375177] usb 2-2.2: USB disconnect, address 9
Sep 28 08:05:53 kernel: [ 113.375184] usb 2-2.2.2: USB disconnect, address 10
Sep 28 08:07:48 kernel: [ 257.348074] usb 2-2: new high speed USB device using ehci_hcd and address 11
Sep 28 08:07:48 kernel: [ 257.482484] usb 2-2: configuration #1 chosen from 1 choice
Sep 28 08:07:48 kernel: [ 257.482583] hub 2-2:1.0: USB hub found
Sep 28 08:07:48 kernel: [ 257.482679] hub 2-2:1.0: 4 ports detected
Sep 28 08:07:48 kernel: [ 257.587687] usb 2-2: New USB device found, idVendor=0409, idProduct=005a
Sep 28 08:07:48 kernel: [ 257.587694] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sep 28 08:07:48 kernel: [ 257.804445] usb 2-2.1: new low speed USB device using ehci_hcd and address 12
Sep 28 08:07:49 kernel: [ 257.918596] usb 2-2.1: configuration #1 chosen from 1 choice
Sep 28 08:07:49 kernel: [ 257.922249] input: KYE NetScroll+ Traveler as /class/input/input7
Sep 28 08:07:49 kernel: [ 257.960497] input,hidraw0: USB HID v1.10 Mouse [KYE NetScroll+ Traveler] on usb-0000:00:02.1-2.1
Sep 28 08:07:49 kernel: [ 257.962287] usb 2-2.1: New USB device found, idVendor=0458, idProduct=002e
Sep 28 08:07:49 kernel: [ 257.962287] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 28 08:07:49 kernel: [ 257.962287] usb 2-2.1: Product: NetScroll+ Traveler
Sep 28 08:07:49 kernel: [ 257.962287] usb 2-2.1: Manufacturer: KYE
Sep 28 08:07:49 kernel: [ 258.189296] usb 2-2.2: new high speed USB device using ehci_hcd and address 13
Sep 28 08:07:49 kernel: [ 258.304294] usb 2-2.2: configuration #1 chosen from 1 choice
Sep 28 08:07:49 kernel: [ 258.304718] hub 2-2.2:1.0: USB hub found
Sep 28 08:07:49 kernel: [ 258.304958] hub 2-2.2:1.0: 3 ports detected
Sep 28 08:07:49 kernel: [ 258.411859] usb 2-2.2: New USB device found, idVendor=05ac, idProduct=1006
Sep 28 08:07:49 kernel: [ 258.411862] usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 28 08:07:49 kernel: [ 258.411865] usb 2-2.2: Product: Keyboard Hub
Sep 28 08:07:49 kernel: [ 258.411867] usb 2-2.2: Manufacturer: Apple, Inc.
Sep 28 08:07:49 kernel: [ 258.411868] usb 2-2.2: SerialNumber: 000000000000
Sep 28 08:07:49 kernel: [ 258.611861] usb 2-2.2.2: new low speed USB device using ehci_hcd and address 14
Sep 28 08:07:49 kernel: [ 258.710293] usb 2-2.2.2: configuration #1 chosen from 1 choice
Sep 28 08:07:49 kernel: [ 258.714406] input: Apple, Inc Apple Keyboard as /class/input/input8
Sep 28 08:07:49 kernel: [ 258.744216] input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-2.2.2
Sep 28 08:07:49 kernel: [ 258.746450] input: Apple, Inc Apple Keyboard as /class/input/input9
Sep 28 08:07:49 kernel: [ 258.774259] input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-2.2.2
Sep 28 08:07:49 kernel: [ 258.774374] usb 2-2.2.2: New USB device found, idVendor=05ac, idProduct=0221
Sep 28 08:07:49 kernel: [ 258.774377] usb 2-2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Sep 28 08:07:49 kernel: [ 258.774380] usb 2-2.2.2: Product: Apple Keyboard
Sep 28 08:07:49 kernel: [ 258.774381] usb 2-2.2.2: Manufacturer: Apple, Inc
Sep 28 08:08:05 iso-scan: Failing with ISO_COUNT = 1, MOUNTABLE_DEVS_COUNT = 4, ISO_MOUNT_COUNT = 0
Sep 28 08:08:05 main-menu[1486]: WARNING **: Configuring 'iso-scan' failed with error code 1
Sep 28 08:08:05 main-menu[1486]: WARNING **: Menu item 'iso-scan' failed.
Sep 28 08:08:05 main-menu[1486]: INFO: Modifying debconf priority limit from 'high' to 'medium'
Sep 28 08:08:05 debconf: Setting debconf/priority to medium
Sep 28 08:08:05 main-menu[1486]: DEBUG: resolver (libc6-udeb): package doesn't exist (ignored)
Sep 28 08:08:05 main-menu[1486]: DEBUG: resolver (libc6): package doesn't exist (ignored)
Sep 28 08:08:09 main-menu[1486]: INFO: Falling back to the package description for auto-install
Sep 28 08:08:09 main-menu[1486]: INFO: Falling back to the package description for ai-choosers
Sep 28 08:08:09 main-menu[1486]: INFO: Menu item 'save-logs' selected
Sep 28 08:08:23 init: init: starting pid 1464, tty '/dev/tty2': '-/bin/sh'
Sep 28 08:08:39 kernel: [ 314.286335] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
--- End Message ---