Bug#532785: marked as done (chroot to lenny /target in debootstrap segfaults)
Your message dated Tue, 04 Aug 2009 18:32:10 +0000
with message-id <E1MYOny-0001Rn-0Q@ries.debian.org>
and subject line Bug#539744: fixed in base-installer 1.102
has caused the Debian Bug report #539744,
regarding chroot to lenny /target in debootstrap segfaults
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
539744: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=539744
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports
Boot method: CD
Image version: http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-cd/debian-testing-i386-kde-CD-1.iso but also with netinstall
Date: 11 June 2009 15:40
Machine: Lenovo ThinkPad T500 + VirtualBox
Processor:Intel Core 2 Duo processor P8400 (2.26 GHz), 3-MB L2 cache / VirtualBox Processor
Memory: 2GB / 512 MB
Partitions:
Output of lspci -knn (or lspci -nn):
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [E for wifi, O for ethernet]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Cannot complete the install both directly on the T500 or in a VirtualBox machine. The problems are all during base system install and are:
1. Error message: "Debootstrap warning Warning: Failure trying to run: chroot /target mount -t proc proc /proc"
Click on continue brings up another message: "The debootstrap program exited with an error (return value 2). Check /var/log/syslog or see virtual console 4"
Virtual console 4 says:
main-menu[842]: INFO: Menu item 'bootstrap-base' selected
debootstrap: Segmentation fault
Click on continue brings up this message: "The base system installation into /target/ failed. Check..."
when trying to repeat the Install the base system phase I'm asked if I want to proceed with installation to unclean target. If I click yes the installation continues and I don't see the above messages again.
2.After choosing which kernel to use and wheter to include all drivers in initrd, configuring linux-image fails.
Message: "An error was returned while trying to install the kernel into the target system.
Kernel package: 'linux-image-2.6-686'.
Check /var/log/..."
This happens regardless of the kernel I choose to install.
syslog says:
in-target: Selectin previously deslected package linux-image-2.6-686
in-target: Unpacking linux-image-2.6-686 (from .../linux-image-2.6-686-2.6.26+17+lenny1_i386.deb) ...
in-target: Setting up linux-image-2.6.26-2-686 (2.6.26-15) ...
debconf: Obsolete command TITLE Configuring linux-image-2.6.26-2-686 called
in-target: Running depmod.
in-target: Running mkinitramfs-kpkg.
in-target: Deprecation WARNING: use update-initramfs(8)
in-target: dpkg: warning: obsolete option '--print-installation-architecture', please use '--print-architecture' instead.
in-target: /usr/sbin/mkinitramfs: line 141: mktemp: command not fountd
in-target: mkinitramfs-kpkg failed to create initrd image.
in-target: Failed to create initrd image.
in-target: dpkg: error processing linux-image-2.6.26-2-686 (--configure):
in-target: subprocess installed post-installation script returned error exit status 9
in-target: dpkg: dependency problems prevent configuration of linux-image-2.6-686:
in-targeT: linux-imnage-2.6-686 depends on linux-image-2.6.26-2-686; however:
in target: Package linux-image-2.6.26-2-686 is not configured yet
in-target: dpkg: error processing linux-image-2.26-686 (--configure):
in-target: dependency problems - leaving unconfigured
in-target: Errors were encountered while processing:
in-target: linux-image-2.6.26-2-686
in-target: linux-image-2.6-686
in-target: E: Sub-process /usr/bin/dpkg returned an error code (1)
in-target: base-installer: error: existing on error base-installer/kernel/failed-install
Hope this is useful and that I will one day be able to install from the testing iso.
Regards,
Golan.
--- End Message ---
--- Begin Message ---
Source: base-installer
Source-Version: 1.102
We believe that the bug you reported is fixed in the latest version of
base-installer, which is due to be installed in the Debian FTP archive:
base-installer_1.102.dsc
to pool/main/b/base-installer/base-installer_1.102.dsc
base-installer_1.102.tar.gz
to pool/main/b/base-installer/base-installer_1.102.tar.gz
base-installer_1.102_all.udeb
to pool/main/b/base-installer/base-installer_1.102_all.udeb
bootstrap-base_1.102_amd64.udeb
to pool/main/b/base-installer/bootstrap-base_1.102_amd64.udeb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 539744@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Frans Pop <fjp@debian.org> (supplier of updated base-installer package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Tue, 04 Aug 2009 20:13:45 +0200
Source: base-installer
Binary: base-installer bootstrap-base
Architecture: source all amd64
Version: 1.102
Distribution: unstable
Urgency: low
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Changed-By: Frans Pop <fjp@debian.org>
Description:
base-installer - base system installation framework (udeb)
bootstrap-base - Install the base system (udeb)
Closes: 539744
Changes:
base-installer (1.102) unstable; urgency=low
.
[ Frans Pop ]
* s390: also exclude -s390x-tape kernels during kernel selection.
* Temporarily replace the /etc/fstab in target by a real dummy file to
closer match what debootstrap does internally. It avoids a problem
installing Lenny when the fstab contains UUIDs instead of device names.
Closes: #539744.
* Bump debhelper compatibility to version 6.
.
[ Colin Watson ]
* Add STANZAS subcommand to pkgdetails, to be used by debootstrap 1.0.16.
.
[ Updated translations ]
* Basque (eu.po) by Piarres Beobide
* Hindi (hi.po)
* Italian (it.po) by Milo Casagrande
Checksums-Sha1:
cae28806ad69bfa4dc813ca3a943bddb548470ac 1090 base-installer_1.102.dsc
6e5a1cff95a2eb8d251da92a950184cda313eb0b 266514 base-installer_1.102.tar.gz
bd128a2d944d2b77d31672c4a67ad11b1961baf6 42034 base-installer_1.102_all.udeb
01cf0e8ecf54a1308cda31e38d679102af57761f 165584 bootstrap-base_1.102_amd64.udeb
Checksums-Sha256:
cf67c5b53e62b05f7c73acf83dba6b7a6ad614eee53f9f768cf9670c17ea1e84 1090 base-installer_1.102.dsc
96fdefe615ec4bb5ebad0e57a8cd44fe7f45e1fc191f72e6df1519d551df5421 266514 base-installer_1.102.tar.gz
411fceba62b5fe3faa3942b488c5765c025a31bee11ab45e61c669b8517a47ae 42034 base-installer_1.102_all.udeb
718e5ba6252919792698e7ffa44674695fc2bc809adb9ccc40c7a32e5e9346d7 165584 bootstrap-base_1.102_amd64.udeb
Files:
efea0ffbafbd25ebdffb7d641b8cb098 1090 debian-installer required base-installer_1.102.dsc
a75025d01dde6c5239c988af0412d59d 266514 debian-installer required base-installer_1.102.tar.gz
d434d2291f9b2478da08498d76eaf821 42034 debian-installer required base-installer_1.102_all.udeb
5996d615417ac4705e5784840845e0cc 165584 debian-installer required bootstrap-base_1.102_amd64.udeb
Package-Type: udeb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkp4eoUACgkQgm/Kwh6ICoTC4gCfX74M1Gx+UIcYs7629aoK7KeA
dGwAoJiTItMQN4RBo2+csXOE7TLl0JyE
=dcaD
-----END PGP SIGNATURE-----
--- End Message ---
Reply to: