Bug#500995: Installation report
Package: installation-reports
Boot method: network PXE
Image version: daily build GTK image (20081002-19:07)
Used image: http://people.debian.org/~joeyh/d-i/images/daily/netboot/gtk/netboot.tar.gz
Date: 20081003
Machine: ASUS Notebook Z7750
Processor: Pentium M 1,6GHz
Memory: 512MB
Partitions:
> RBG-NB:/home/bernhard# df -Tl
> Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf
> /dev/hda1 ext3 6728280 3864160 2522340 61% /
> tmpfs tmpfs 257800 0 257800 0% /lib/init/rw
> udev tmpfs 10240 92 10148 1% /dev
> tmpfs tmpfs 257800 0 257800 0% /dev/shm
> /dev/hda6 ext3 49469608 202808 46753836 1% /home
> RBG-NB:/home/bernhard#
Output of lspci -knn:
> RBG-NB:/home/bernhard# lspci -knn
> 00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 21)
> Kernel driver in use: agpgart-intel
> Kernel modules: intel-agp
> 00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 21)
> Kernel modules: shpchp
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03)
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03)
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03)
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03)
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83)
> Kernel modules: shpchp
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
> Kernel modules: iTCO_wdt, intel-rng
> 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03)
> Kernel driver in use: PIIX_IDE
> Kernel modules: piix
> 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03)
> Kernel driver in use: i801_smbus
> Kernel modules: i2c-i801
> 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
> Kernel driver in use: Intel ICH
> Kernel modules: snd-intel8x0
> 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03)
> Kernel driver in use: Intel ICH Modem
> Kernel modules: snd-intel8x0m
> 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50]
> Kernel modules: radeonfb
> 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
> Kernel driver in use: tg3
> Kernel modules: tg3
> 02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
> 02:01.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
> Kernel driver in use: yenta_cardbus
> Kernel modules: yenta_socket
> 02:01.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 04)
> Kernel driver in use: ohci1394
> Kernel modules: ohci1394
> 02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
> Kernel driver in use: ipw2200
> Kernel modules: ipw2200
> RBG-NB:/home/bernhard#
>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ] (i didn't try it, because the installation was completely done over network)
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Immediately after Installation, there were updates available.
Here, the output of dist-upgrade:
> RBG-NB:/home/bernhard# apt-get dist-upgrade
> Paketlisten werden gelesen... Fertig
> Abhängigkeitsbaum wird aufgebaut
> Lese Status-Informationen ein... Fertig
> Berechne Upgrade ...Fertig
> Die folgenden NEUEN Pakete werden installiert:
> esound-clients perl-doc
> 0 aktualisiert, 2 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
> Es müssen 8256kB an Archiven heruntergeladen werden.
> Nach dieser Operation werden 14,2MB Plattenplatz zusätzlich benutzt.
> Möchten Sie fortfahren [J/n]? J
> Hole:1 ftp://192.168.2.1 lenny/main esound-clients 0.2.36-3 [35,5kB]
> Hole:2 ftp://192.168.2.1 lenny/main perl-doc 5.10.0-14 [8220kB]
> Es wurden 8256kB in 15s geholt (529kB/s)
> Wähle vormals abgewähltes Paket esound-clients.
> (Lese Datenbank ... 105977 Dateien und Verzeichnisse sind derzeit installiert.)
> Entpacke esound-clients (aus .../esound-clients_0.2.36-3_i386.deb) ...
> Wähle vormals abgewähltes Paket perl-doc.
> Entpacke perl-doc (aus .../perl-doc_5.10.0-14_all.deb) ...
> Füge »diversion of /usr/bin/perldoc to /usr/bin/perldoc.stub by perl-doc« hinzu
> Verarbeite Trigger für man-db ...
> Richte esound-clients ein (0.2.36-3) ...
> Richte perl-doc ein (5.10.0-14) ...
> RBG-NB:/home/bernhard#
Because, the updates are available on my local mirror (see IP-address 192.168.2.1), it is possible to install the actual packages during installation.
For example:
If you look at packages.debian.org, the package esound-clients was migrated to testing at the beginning of 2006.
Because this is a minor issue, you can ignore this or not.
I will do an dist-upgrade immediately after installation and all is fine.
But it looks better to have an up-to-date system after installation.
If you need more information, please let me know.
Regards
Bernhard
Reply to: