Bug#497867: problems remain after re-install
Package: installation-reports
Boot method: etch-and-half netinstall CD, amd64
Image version: <Full URL to image you downloaded is best>
Date: 2008/09/03, 1457UTC
Machine: ABIT AV8 motherboard
Processor: AMD64 X2 4600+ Socket 939
Memory: 2@ 1GB Kingston CL2
Partitions: <df -Tl will do; the raw partition table is preferred>
/dev/sda7 ext3 585008 202264 353028 37% /
tmpfs tmpfs 1031428 0 1031428 0% /lib/init/rw
udev tmpfs 10240 100 10140 1% /dev
tmpfs tmpfs 1031428 16 1031412 1% /dev/shm
/dev/sda11 ext3 20644348 7700320 12523572 39% /home
/dev/sda9 ext3 8776036 2061684 6268552 25% /usr
/dev/sda10 ext3 1034868 185848 796384 19% /usr/local
/dev/sda8 ext3 6712428 923684 5447768 15% /var
/dev/sda1 fuseblk 16779860 11984836 4795024 72% /win2k/dc
/dev/sda3 fuseblk 25671868 12363824 13308044 49% /win2k/xp
/dev/sda5 fuseblk 20988888 12041232 8947656 58% /win2k/dd
/dev/sda6 fuseblk 209720508 103939800 105780708 50% /win2k/de
Output of lspci -nn and lspci -vnn:
$ lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:0282]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:1282]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:2282]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:3282]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:4282]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:7282]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South] [1106:b188]
00:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394
Host Controller [1106:3044] (rev 46)
00:09.0 Serial controller [0700]: Moxa Technologies Co Ltd Smartio
C168H/PCI [1393:1680] (rev 02)
00:0a.0 Multimedia video controller [0400]: Conexant Unknown device
[14f1:5b7a] /* HVR-1600 */
00:0b.0 SCSI storage controller [0100]: Adaptec AHA-2940U/UW/D /
AIC-7881U [9004:8178]
00:0c.0 Multimedia audio controller [0401]: C-Media Electronics Inc
CM8738 [13f6:0111] (rev 10)
00:0e.0 Ethernet controller [0200]: VIA Technologies, Inc.
VT6120/VT6121/VT6122 Gigabit Ethernet Adapter [1106:3119] (rev 11)
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420
SATA RAID Controller [1106:3149] (rev 80)
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06)
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81)
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0
[1106:3104] (rev 86)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South] [1106:3227]
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43
[GeForce 6600/GeForce 6600 GT] [10de:00f1] (rev a2) /* Gigabyte
branded */
lspci -vnn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:0282]
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at <ignored> (32-bit, prefetchable)
Capabilities: <access denied>
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:1282]
Flags: bus master, medium devsel, latency 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:2282]
Flags: bus master, medium devsel, latency 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:3282]
Flags: bus master, medium devsel, latency 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:4282]
Flags: bus master, medium devsel, latency 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host
Bridge [1106:7282]
Flags: bus master, medium devsel, latency 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ec000000-eeffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Capabilities: <access denied>
00:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394
Host Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: Unknown device [3d38:f008]
Flags: bus master, medium devsel, latency 32, IRQ 23
Memory at ef023000 (32-bit, non-prefetchable) [size=2K]
I/O ports at e400 [size=128]
Capabilities: <access denied>
00:09.0 Serial controller [0700]: Moxa Technologies Co Ltd Smartio
C168H/PCI [1393:1680] (rev 02) (prog-if 80)
Flags: medium devsel, IRQ 17
I/O ports at e500 [size=128]
I/O ports at d800 [size=64]
I/O ports at de00 [size=16]
00:0a.0 Multimedia video controller [0400]: Conexant Unknown device [14f1:5b7a]
Subsystem: Hauppauge computer works Inc. Unknown device [0070:7444]
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
/* HVR-1600 */
00:0b.0 SCSI storage controller [0100]: Adaptec AHA-2940U/UW/D /
AIC-7881U [9004:8178]
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at c000 [disabled] [size=256]
Memory at ef020000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 80020000 [disabled] [size=64K]
00:0c.0 Multimedia audio controller [0401]: C-Media Electronics Inc
CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio
Device [13f6:0111]
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at c400 [size=256]
Capabilities: <access denied>
00:0e.0 Ethernet controller [0200]: VIA Technologies, Inc.
VT6120/VT6121/VT6122 Gigabit Ethernet Adapter [1106:3119] (rev 11)
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 22
I/O ports at c800 [size=256]
Memory at ef021000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <access denied>
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420
SATA RAID Controller [1106:3149] (rev 80)
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at d900 [size=8]
I/O ports at da00 [size=4]
I/O ports at db00 [size=8]
I/O ports at dc00 [size=4]
I/O ports at dd00 [size=16]
I/O ports at cc00 [size=256]
Capabilities: <access denied>
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
(rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 20
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at df00 [size=16]
Capabilities: <access denied>
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e000 [size=32]
Capabilities: <access denied>
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e100 [size=32]
Capabilities: <access denied>
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e200 [size=32]
Capabilities: <access denied>
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e300 [size=32]
Capabilities: <access denied>
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0
[1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at ef022000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ABIT Computer Corp. Unknown device [147b:1415]
Flags: medium devsel, IRQ 22
I/O ports at d000 [size=256]
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV43
[GeForce 6600/GeForce 6600 GT] [10de:00f1] (rev a2) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology Unknown device [1458:3150]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at ee000000 [disabled] [size=128K]
Capabilities: <access denied>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ O]
Detect network card: [O ]
Configure network: [ O] /* should have offered static IP option */
Detect CD: [ O]
Load installer modules: [O ]
Detect hard drives: [ O]
Partition hard drives: [ O]
Install base system: [ O]
Clock/timezone setup: [O ]
User/password setup: [ O]
Install tasks: [ O]
Install boot loader: [ O]
Overall install: [ O]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I was using Debian 2.6.18 amd64, but it became corrupted. I kept /home
and /usr/local but reformatted other non-Windows partitions.
I use the free nVidia drivers.
In the previous install, eth0 was the FireWire and eth1 the NIC. In
this install, eth0 is the NIC and nothing was set up for the FireWire.
In the previous install, I had a Hauppauge! PVR-350; I upgraded to a
HVR-1600 just before the new install. Despite over a year of effort, I
never got the PVR-350 to work outside of Windows. So far it appears
the HVR-1600 will also never work. (I actually chose etch-n-half in
hopes it would work.)
The 2.6.18 kernel was always stable. I also had a 2.6.21 backports
kernel that was usually stable. However, at totally unpredictable,
random times the entire system would lock up without any warning or
error message. The Caps Lock and Scroll Lock lights would blink and
the Num Lock go off. Recovery is possible only with the switch at the
rear of the power supply. This problem continues with the 2.6.24
install. This has never happened in Win2000/XP.
2.6.24-etchnhalf.1-amd64 #1 SMP Mon Jul 21 10:36:02 UTC 2008 x86_64 GNU/Linux
dmesg
Initializing cgroup subsys cpuset
Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.4)
(dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian
4.1.1-21)) #1 SMP Mon Jul 21 10:36:02 UTC 2008
Command line: root=/dev/sda7 ro quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 524016) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP 000F77D0, 0014 (r0 VIAK8T)
ACPI: RSDT 7FEF3040, 0034 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FEF30C0, 0074 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FEF3180, 4F8A (r1 VIAK8T AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FEF0000, 0040
ACPI: BOOT 7FEF8180, 0028 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
ACPI: SSDT 7FEF82C0, 020C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: APIC 7FEF8200, 0068 (r1 VIAK8T AWRDACPI 42302E31 AWRD 0)
Scanning NUMA topology in Northbridge 24
CPU has 2 num_cores
No NUMA configuration found
Faking a node at 0000000000000000-000000007fef0000
Entering add_active_range(0, 0, 158) 0 entries of 3200 used
Entering add_active_range(0, 256, 524016) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007fef0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 158
0: 256 -> 524016
On node 0 totalpages: 523918
DMA zone: 56 pages used for memmap
DMA zone: 1069 pages reserved
DMA zone: 2873 pages, LIFO batch:0
DMA32 zone: 7108 pages used for memmap
DMA32 zone: 512812 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:7ed00000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 34400 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515685
Policy zone: DMA32
Kernel command line: root=/dev/sda7 ro quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2451.719 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
CPU 0: aperture @ e0000000 size 128 MB
Memory: 2056908k/2096064k available (2146k kernel code, 38764k
reserved, 1004k data, 316k init)
Calibrating delay using timer specific routine.. 4909.05 BogoMIPS (lpj=9818109)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12769382
Detected 12.769 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4903.45 BogoMIPS (lpj=9806908)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
NET: Registered protocol family 8
NET: Registered protocol family 20
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 128M @ 0xe0000000
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
system 00:00: iomem range 0xd6000-0xd7fff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x7ff00000-0x7fffffff has been reserved
system 00:00: iomem range 0x7fef0000-0x7fefffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x7feeffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
system 00:00: driver attached
system 00:02: ioport range 0x4000-0x407f has been reserved
system 00:02: ioport range 0x5000-0x500f has been reserved
system 00:02: driver attached
system 00:03: ioport range 0xb78-0xb7b has been reserved
system 00:03: ioport range 0xf78-0xf7b has been reserved
system 00:03: ioport range 0xa78-0xa7b has been reserved
system 00:03: ioport range 0xe78-0xe7b has been reserved
system 00:03: ioport range 0xbbc-0xbbf has been reserved
system 00:03: ioport range 0xfbc-0xfbf has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:03: ioport range 0x290-0x297 has been reserved
system 00:03: driver attached
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: ec000000-eeffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
Time: acpi_pm clocksource has been installed.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5629k freed
Simple Boot Flag at 0x37 set to 0x1
audit: initializing netlink socket (disabled)
audit(1220554006.720:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:01:00.0
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:09.0 disabled
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:0c: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:0b: driver attached
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input1
VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
Copyright (c) 2004 Red Hat Inc.
ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 22 (level, low) -> IRQ 22
eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
eth0: Ethernet Address: 00:50:8D:D1:68:99
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23]
MMIO=[ef023000-ef0237ff] Max Packet=[2048] IR/IT contexts=[4/8]
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e100
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e200
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e300
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: irq 21, io mem 0xef022000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d06899]
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
hiddev96hidraw0: USB HID v1.11 Device [Belkin Belkin UPS] on
usb-0000:00:10.2-1usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
sata_via 0000:00:0f.0: version 2.3
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level,
low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 10
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
scsi1 : sata_via
scsi2 : sata_via
ata1: SATA max UDMA/133 cmd 0xd900 ctl 0xda00 bmdma 0xdd00 irq 20
ata2: SATA max UDMA/133 cmd 0xdb00 ctl 0xdc00 bmdma 0xdd08 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1)
ata1.00: configured for UDMA/133
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi: waiting for bus probes to complete ...
scsi 1:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level,
low) -> IRQ 20
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xdf00-0xdf07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Driver 'sd' needs updating - please use bus_type methods
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
sd 1:0:0:0: [sda] Attached SCSI disk
Probing IDE interface ide1...
hdd: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
hdc: SONY CD-RW CRX320E, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdd: UDMA/33 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Attempting manual resume
swsusp: Marking nosave pages: 000000000009e000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
input: PC Speaker as /class/input/input4
ACPI: Power Button (CM) [PWRB]
Floppy drive(s): fd0 is 1.44M
MOXA Smartio/Industio family driver version 2.0.2
Found MOXA C168H/PCI series board (BusNo=0, DevNo=9)
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
max. baud rate = 921600 bps.
FDC 0 is a post-1991 82077
MOXA Smartio/Industio family driver version 1.8
Found MOXA C168H/PCI series board(BusNo=0,DevNo=9)
ttyMI0 - ttyMI7 max. baud rate = 921600 bps.
Couldn't install MOXA Smartio/Industio family driver !
pnp: the driver 'parport_pc' has been registered
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
parport_pc 00:0a: driver attached
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
input: ImExPS/2 Logitech Wheel Mouse as /class/input/input5
Adding 1052216k swap on /dev/sda12. Priority:-1 extents:1 across:1052216k
EXT3 FS on sda7, internal journal
loop: module loaded
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
dm-devel@redhat.comfuse init (API version 7.9)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MOXA Smartio/Industio family driver version 1.8
Found MOXA C168H/PCI series board(BusNo=0,DevNo=9)
ttyMI0 - ttyMI7 max. baud rate = 921600 bps.
Couldn't install MOXA Smartio/Industio family driver !
Velocity is AUTO mode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: Link auto-negotiation speed 1000M bps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=1 u64DiffCores=3170927.
vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 1.6.4 (interface 0x00080000).
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
--
「女のこが天使じゃない
魔物が半分FIFTY」
ジャングルはいつもハレのちグゥ
Reply to: