Bug#411702: installation-reports: etch ppc installer add wrong kernel param in yaboot.conf
Package: installation-reports
Version: ppc installer
Severity: normal
-- Package-specific info:
Boot method: network
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/powerpc/iso-cd/debian-testing-powerpc-netinst.iso
as of 20070219-09:25
Date: Feb 19 2007
Machine: Apple iMac G5, Rev. B
Partitions: <df -Tl will do; the raw partition table is preferred>
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [E]
Overall install: [O]
Comments/Problems:
I did a clean install of debian over an existing ubuntu/ppc
installation. I used the 'install64' kernel for installation and
appended 'tasks="standard, kde-desktop"' at the boot prompt. The
installation worked as expected, and after all packages were downloaded
and installed the bootloader was installed automatically. After a
reboot however, yaboot told me that parsing the yaboot.conf failed. A
quick look at the file showed the error: the yaboot.conf contained a
line 'append="kde-desktop""' which caused the parsing of the file to
fail. Note the double double quotes at the end. After removing this line
(for both the 'Linux' and the 'old' images) the bootloader works
correctly.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070215-04:37)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux Atlas 2.6.18-4-powerpc64 #1 SMP Fri Feb 2 14:12:13 CET 2007
ppc64 unknown
lspci -nn: 0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3L AGP Bridge
[106b:0058]
lspci -nn: 0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies Inc
RV350 AP [Radeon 9600] [1002:4150]
lspci -nn: 0001:00:01.0 PCI bridge [0604]: Apple Computer Inc. Shasta PCI
Bridge [106b:0053]
lspci -nn: 0001:00:02.0 PCI bridge [0604]: Apple Computer Inc. Shasta PCI
Bridge [106b:0054]
lspci -nn: 0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. Shasta PCI
Bridge [106b:0055]
lspci -nn: 0001:01:01.0 Network controller [0280]: Broadcom Corporation
BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev
02)
lspci -nn: 0001:01:07.0 Unknown class [ff00]: Apple Computer Inc. Shasta Mac
I/O [106b:004f]
lspci -nn: 0001:01:0b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035]
(rev 43)
lspci -nn: 0001:01:0b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035]
(rev 43)
lspci -nn: 0001:01:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0
[1033:00e0] (rev 04)
lspci -nn: 0001:02:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240]
lspci -nn: 0001:02:0d.0 Unknown class [ff00]: Apple Computer Inc. Shasta IDE
[106b:0050]
lspci -nn: 0001:02:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc.
Shasta Firewire [106b:0052]
lspci -nn: 0001:03:0f.0 Ethernet controller [0200]: Apple Computer Inc. Shasta
(Sun GEM) [106b:0051]
lspci -vnn: 0000:f0:0b.0 Host bridge [0600]: Apple Computer Inc. U3L AGP
Bridge [106b:0058]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 16
lspci -vnn: Capabilities: [80] AGP version 3.0
lspci -vnn:
lspci -vnn: 0000:f0:10.0 VGA compatible controller [0300]: ATI Technologies
Inc RV350 AP [Radeon 9600] [1002:4150]
lspci -vnn: Subsystem: ATI Technologies Inc RV350 AP [Radeon 9600]
[1002:4150]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 59
lspci -vnn: Memory at 98000000 (32-bit, prefetchable) [size=128M]
lspci -vnn: I/O ports at f0000400 [size=256]
lspci -vnn: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Expansion ROM at 90020000 [size=128K]
lspci -vnn: Capabilities: [58] AGP version 3.0
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:00:01.0 PCI bridge [0604]: Apple Computer Inc. Shasta PCI
Bridge [106b:0053]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
lspci -vnn: Memory behind bridge: 80200000-805fffff
lspci -vnn: Prefetchable memory behind bridge: 00000000-000fffff
lspci -vnn: Capabilities: [70] HyperTransport: Slave or Primary Interface
lspci -vnn: Capabilities: [90] HyperTransport: Interrupt Discovery and
Configuration
lspci -vnn:
lspci -vnn: 0001:00:02.0 PCI bridge [0604]: Apple Computer Inc. Shasta PCI
Bridge [106b:0054]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
lspci -vnn: Memory behind bridge: 80000000-800fffff
lspci -vnn: Prefetchable memory behind bridge: 00000000-000fffff
lspci -vnn: Capabilities: [70] HyperTransport: Revision ID: 1.04
lspci -vnn:
lspci -vnn: 0001:00:03.0 PCI bridge [0604]: Apple Computer Inc. Shasta PCI
Bridge [106b:0055]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
lspci -vnn: Memory behind bridge: 80100000-801fffff
lspci -vnn: Prefetchable memory behind bridge: 00000000-000fffff
lspci -vnn: Capabilities: [70] HyperTransport: Revision ID: 1.04
lspci -vnn:
lspci -vnn: 0001:01:01.0 Network controller [0280]: Broadcom Corporation
BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev
02)
lspci -vnn: Subsystem: Apple Computer Inc. Unknown device [106b:4318]
lspci -vnn: Flags: bus master, fast devsel, latency 16, IRQ 60
lspci -vnn: Memory at 80084000 (32-bit, non-prefetchable) [disabled]
[size=8K]
lspci -vnn:
lspci -vnn: 0001:01:07.0 Unknown class [ff00]: Apple Computer Inc. Shasta Mac
I/O [106b:004f]
lspci -vnn: Flags: bus master, medium devsel, latency 16
lspci -vnn: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn:
lspci -vnn: 0001:01:0b.0 USB Controller [0c03]: NEC Corporation USB
[1033:0035] (rev 43) (prog-if 10)
lspci -vnn: Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 70
lspci -vnn: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:01:0b.1 USB Controller [0c03]: NEC Corporation USB
[1033:0035] (rev 43) (prog-if 10)
lspci -vnn: Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 70
lspci -vnn: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:01:0b.2 USB Controller [0c03]: NEC Corporation USB 2.0
[1033:00e0] (rev 04) (prog-if 20)
lspci -vnn: Subsystem: NEC Corporation USB 2.0 [1033:00e0]
lspci -vnn: Flags: bus master, medium devsel, latency 16, IRQ 70
lspci -vnn: Memory at 80080000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:02:0c.0 IDE interface [0101]: Broadcom K2 SATA [1166:0240]
(prog-if 8f [Master SecP SecO PriP PriO])
lspci -vnn: Subsystem: Broadcom K2 SATA [1166:0240]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 17
lspci -vnn: I/O ports at <unassigned> [disabled]
lspci -vnn: I/O ports at <unassigned> [disabled]
lspci -vnn: I/O ports at <unassigned> [disabled]
lspci -vnn: I/O ports at <unassigned> [disabled]
lspci -vnn: I/O ports at <unassigned> [disabled]
lspci -vnn: Memory at 80102000 (32-bit, non-prefetchable) [size=8K]
lspci -vnn:
lspci -vnn: 0001:02:0d.0 Unknown class [ff00]: Apple Computer Inc. Shasta IDE
[106b:0050]
lspci -vnn: Flags: bus master, medium devsel, latency 32, IRQ 38
lspci -vnn: Memory at 80104000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn:
lspci -vnn: 0001:02:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc.
Shasta Firewire [106b:0052] (prog-if 10)
lspci -vnn: Subsystem: Apple Computer Inc. Unknown device [106b:5811]
lspci -vnn: Flags: bus master, medium devsel, latency 248, IRQ 39
lspci -vnn: Memory at 80100000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 0001:03:0f.0 Ethernet controller [0200]: Apple Computer Inc.
Shasta (Sun GEM) [106b:0051]
lspci -vnn: Flags: bus master, 66MHz, slow devsel, latency 16, IRQ 40
lspci -vnn: Memory at 80400000 (32-bit, non-prefetchable) [size=2M]
lspci -vnn: Expansion ROM at 80200000 [disabled] [size=1M]
lspci -vnn:
modulemap: 1033:0035 ohci_hcd
modulemap: 1033:0035 ohci_hcd
modulemap: 1033:00e0 ehci_hcd
modulemap: 1166:0240 sata_svw
modulemap: 106b:0052 ohci1394
modulemap: 106b:0051 sungem
lsmod: Module Size Used by
lsmod: nls_utf8 7296 0
lsmod: hfsplus 111048 0
lsmod: xfs 682392 0
lsmod: reiserfs 363460 0
lsmod: jfs 245928 0
lsmod: hfs 79656 0
lsmod: ext3 198312 1
lsmod: jbd 98816 1 ext3
lsmod: vfat 23888 0
lsmod: fat 79504 1 vfat
lsmod: ext2 105088 0
lsmod: mbcache 18056 2 ext3,ext2
lsmod: sd_mod 33488 3
lsmod: sata_svw 18684 2
lsmod: libata 157216 1 sata_svw
lsmod: sungem 56116 0
lsmod: sungem_phy 19336 1 sungem
lsmod: eth1394 32856 0
lsmod: sbp2 34936 0
lsmod: isofs 52976 0
lsmod: ide_disk 28376 0
lsmod: aec62xx 15744 0 [permanent]
lsmod: amd74xx 23744 0 [permanent]
lsmod: cmd64x 19408 0 [permanent]
lsmod: hpt34x 11816 0 [permanent]
lsmod: ns87415 10572 0 [permanent]
lsmod: pdc202xx_new 19888 0 [permanent]
lsmod: pdc202xx_old 19840 0 [permanent]
lsmod: sc1200 15440 0 [permanent]
lsmod: siimage 23176 0 [permanent]
lsmod: sl82c105 14472 0 [permanent]
lsmod: trm290 11122 0 [permanent]
lsmod: via82cxxx 16164 0 [permanent]
lsmod: usb_storage 114632 0
lsmod: scsi_mod 208424 4 sd_mod,libata,sbp2,usb_storage
lsmod: usbserial 51072 0
lsmod: usbhid 77112 0
lsmod: windfarm_smu_sat 14912 0 [permanent]
lsmod: windfarm_smu_sensors 14072 4
lsmod: windfarm_smu_controls 12816 3
lsmod: windfarm_pm81 16864 0
lsmod: windfarm_pid 8176 1 windfarm_pm81
lsmod: windfarm_max6690_sensor 11408 0
lsmod: windfarm_lm75_sensor 12328 1
lsmod: windfarm_cpufreq_clamp 8864 1
lsmod: windfarm_core 22896 7
windfarm_smu_sat,windfarm_smu_sensors,windfarm_smu_controls,windfarm_pm81,windfarm_max6690_sensor,windfarm_lm75_sensor,windfarm_cpufreq_clamp
lsmod: ehci_hcd 53328 0
lsmod: ohci_hcd 37428 0
lsmod: usbcore 199452 6
usb_storage,usbserial,usbhid,ehci_hcd,ohci_hcd
lsmod: ide_cd 60928 0
lsmod: cdrom 52112 1 ide_cd
lsmod: ohci1394 56696 0
lsmod: ieee1394 428272 3 eth1394,sbp2,ohci1394
lsmod: generic 11404 0 [permanent]
lsmod: i2c_powermac 12176 0
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 747016 416 746600 0% /dev
df: tmpfs 747016 416 746600 0% /dev
df: tmpfs 747016 416 746600 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part5 11472208 2752108 8137340
25% /target
free: total used free shared buffers
free: Mem: 1494032 1465088 28944 0 80416
free: Swap: 533404 412 532992
free: Total: 2027436 1465500 561936
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: cpu : PPC970FX, altivec supported
/proc/cpuinfo: clock : 1800.000000MHz
/proc/cpuinfo: revision : 3.0 (pvr 003c 0300)
/proc/cpuinfo:
/proc/cpuinfo: timebase : 33333333
/proc/cpuinfo: platform : PowerMac
/proc/cpuinfo: machine : PowerMac8,2
/proc/cpuinfo: motherboard : PowerMac8,2 MacRISC4 Power Macintosh
/proc/cpuinfo: detected as : 414 (Unknown Shasta-based)
/proc/cpuinfo: pmac flags : 00000000
/proc/cpuinfo: L2 cache : 512K unified
/proc/cpuinfo: pmac-generation : NewWorld
/proc/ioports: 00000000-003fffff : /ht@0,f2000000
/proc/ioports: 00400000-00bfffff : /pci@0,f0000000
/proc/ioports: 00400400-004004ff : 0000:f0:10.0
/proc/iomem: 80000000-8fffffff : /ht@0,f2000000
/proc/iomem: 80000000-800fffff : PCI Bus 0001:01
/proc/iomem: 80000000-8007ffff : 0001:01:07.0
/proc/iomem: 80000000-8007ffff : 0.80000000:mac-io
/proc/iomem: 80000000-80004fff : 0.00000000:i2s
/proc/iomem: 80000000-800009ff : 0.00000000:i2s
/proc/iomem: 80000050-8000008a : 0.00000050:gpio
/proc/iomem: 80013000-80013000 : 0.00013000:ch-b
/proc/iomem: 80013000-80013000 : pmac_zilog
/proc/iomem: 80013010-80013010 : 0.00013000:ch-b
/proc/iomem: 80013010-80013010 : pmac_zilog
/proc/iomem: 80013020-80013020 : 0.00013020:ch-a
/proc/iomem: 80013020-80013020 : pmac_zilog
/proc/iomem: 80013030-80013030 : 0.00013020:ch-a
/proc/iomem: 80013030-80013030 : pmac_zilog
/proc/iomem: 80013040-80013040 : 0.00013000:ch-b
/proc/iomem: 80013040-80013040 : pmac_zilog
/proc/iomem: 80013050-80013050 : 0.00013020:ch-a
/proc/iomem: 80013050-80013050 : pmac_zilog
/proc/iomem: 80015000-80015fff : 0.00015000:timer
/proc/iomem: 80018000-80018fff : 0.00018000:i2c
/proc/iomem: 80040000-8007ffff : 0.00040000:mpic
/proc/iomem: 80080000-800800ff : 0001:01:0b.2
/proc/iomem: 80080000-800800ff : ehci_hcd
/proc/iomem: 80081000-80081fff : 0001:01:0b.1
/proc/iomem: 80081000-80081fff : ohci_hcd
/proc/iomem: 80082000-80082fff : 0001:01:0b.0
/proc/iomem: 80082000-80082fff : ohci_hcd
/proc/iomem: 80084000-80085fff : 0001:01:01.0
/proc/iomem: 80100000-801fffff : PCI Bus 0001:02
/proc/iomem: 80100000-80100fff : 0001:02:0e.0
/proc/iomem: 80100000-801007ff : ohci1394
/proc/iomem: 80102000-80103fff : 0001:02:0c.0
/proc/iomem: 80102000-80103fff : sata_svw
/proc/iomem: 80104000-80107fff : 0001:02:0d.0
/proc/iomem: 80104000-80107fff : Kauai ATA
/proc/iomem: 80200000-805fffff : PCI Bus 0001:03
/proc/iomem: 80200000-802fffff : 0001:03:0f.0
/proc/iomem: 80400000-805fffff : 0001:03:0f.0
/proc/iomem: 80400000-805fffff : sungem
/proc/iomem: 90000000-9fffffff : /pci@0,f0000000
/proc/iomem: 90000000-9000ffff : 0000:f0:10.0
/proc/iomem: 90000000-9000ffff : radeonfb mmio
/proc/iomem: 90020000-9003ffff : 0000:f0:10.0
/proc/iomem: 98000000-9fffffff : 0000:f0:10.0
/proc/iomem: 98000000-9fffffff : radeonfb framebuffer
/proc/iomem: a0000000-efffffff : /ht@0,f2000000
/proc/iomem: f1000000-f1ffffff : /pci@0,f0000000
/proc/interrupts: CPU0
/proc/interrupts: 16: 0 MPIC 2 Level keywest i2c
/proc/interrupts: 17: 112054 MPIC 1 Level libata
/proc/interrupts: 27: 0 MPIC 1 Level keywest i2c
/proc/interrupts: 38: 2251 MPIC 1 Level ide0
/proc/interrupts: 39: 2 MPIC 1 Level ohci1394
/proc/interrupts: 40: 608066 MPIC 1 Level eth1
/proc/interrupts: 48: 1 MPIC 1 Edge SMU message
/proc/interrupts: 53: 23792 MPIC 1 Edge SMU doorbell
/proc/interrupts: 70: 1028 MPIC 1 Level ohci_hcd:usb1,
ohci_hcd:usb2, ehci_hcd:usb3
/proc/interrupts: BAD: 0
/proc/meminfo: MemTotal: 1494032 kB
/proc/meminfo: MemFree: 28864 kB
/proc/meminfo: Buffers: 80416 kB
/proc/meminfo: Cached: 1200192 kB
/proc/meminfo: SwapCached: 96 kB
/proc/meminfo: Active: 444048 kB
/proc/meminfo: Inactive: 864208 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1494032 kB
/proc/meminfo: LowFree: 28864 kB
/proc/meminfo: SwapTotal: 533404 kB
/proc/meminfo: SwapFree: 532992 kB
/proc/meminfo: Dirty: 960 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 27532 kB
/proc/meminfo: Mapped: 2144 kB
/proc/meminfo: Slab: 138736 kB
/proc/meminfo: PageTables: 636 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1280420 kB
/proc/meminfo: Committed_AS: 31652 kB
/proc/meminfo: VmallocTotal: 8589934592 kB
/proc/meminfo: VmallocUsed: 11036 kB
/proc/meminfo: VmallocChunk: 8589921904 kB
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=1000 Version=1965
/proc/bus/input/devices: N: Name="HID 05ac:1000"
/proc/bus/input/devices: P: Phys=usb-0001:01:0b.0-3/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=e080ffdf01cfffff fffffffffffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=1000 Version=1965
/proc/bus/input/devices: N: Name="HID 05ac:1000"
/proc/bus/input/devices: P: Phys=usb-0001:01:0b.0-3/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=1f0000 0 0 0 0
/proc/bus/input/devices: B: REL=3
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=0304 Version=0108
/proc/bus/input/devices: N: Name="Mitsumi Electric Apple Optical USB Mouse"
/proc/bus/input/devices: P: Phys=usb-0001:01:0b.0-2.1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input2
/proc/bus/input/devices: H: Handlers=mouse1
/proc/bus/input/devices: B: EV=100007
/proc/bus/input/devices: B: KEY=f0000 0 0 0 0
/proc/bus/input/devices: B: REL=143
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=020c Version=0410
/proc/bus/input/devices: N: Name="Mitsumi Electric Apple Extended USB
Keyboard"
/proc/bus/input/devices: P: Phys=usb-0001:01:0b.0-2.3/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input3
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120003
/proc/bus/input/devices: B: KEY=1000000000007 ff87207ac14057ff
febeffdfffefffff fffffffffffffffe
/proc/bus/input/devices: B: LED=1f
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=05ac Product=020c Version=0410
/proc/bus/input/devices: N: Name="Mitsumi Electric Apple Extended USB
Keyboard"
/proc/bus/input/devices: P: Phys=usb-0001:01:0b.0-2.3/input1
/proc/bus/input/devices: S: Sysfs=/class/input/input4
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=3
/proc/bus/input/devices: B: KEY=20000c000 e000000000000 0
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.27
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.36
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-11
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.10
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: serial-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: serial-modules
Depends: kernel-image-2.6.18-4-powerpc64-di,
pcmcia-modules-2.6.18-4-powerpc64-di
Description: Serial drivers
Package: lowmemcheck
Status: install ok unpacked
Version: 1.24
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: console-keymaps-usb
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for USB keyboards
Package: cdrom-retriever
Status: install ok installed
Version: 1.13
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.17
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.47), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.44
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.44
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47),
cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.113
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: floppy-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: Floppy driver
Package: kernel-image-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: kernel-image
Description: Linux kernel binary image for the Debian installer
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.49
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.103-2
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: usb-serial-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-powerpc64-di, usb-modules-2.6.18-4-powerpc64-di
Description: USB serial drivers
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.5-1)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.8
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.3-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: usb-storage-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: usb-storage-modules
Depends: scsi-core-modules-2.6.18-4-powerpc64-di,
usb-modules-2.6.18-4-powerpc64-di
Description: USB storage support
Package: cdebconf-udeb
Status: install ok installed
Version: 0.113
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47),
libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: scsi-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-powerpc64-di,
scsi-core-modules-2.6.18-4-powerpc64-di,
cdrom-core-modules-2.6.18-4-powerpc64-di,
firmware-modules-2.6.18-4-powerpc64-di
Description: SCSI drivers
Package: load-cdrom
Status: install ok installed
Version: 1.13
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: cdrom-core-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-powerpc64-di,
scsi-core-modules-2.6.18-4-powerpc64-di, ide-modules-2.6.18-4-powerpc64-di
Description: CDROM support
Package: scsi-core-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: Core SCSI subsystem
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.113
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: fancontrol-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: fancontrol-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: Apple powermac fancontrol modules
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: usb-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: usb-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: USB support
Package: scsi-common-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-powerpc64-di,
scsi-core-modules-2.6.18-4-powerpc64-di,
cdrom-core-modules-2.6.18-4-powerpc64-di
Description: Very common SCSI drivers
Package: floppy-retriever
Status: install ok unpacked
Version: 1.13
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.49
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>=
1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.27
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.49
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.28
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.44
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.26
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.47), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: ide-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: ide-modules
Depends: kernel-image-2.6.18-4-powerpc64-di,
fs-common-modules-2.6.18-4-powerpc64-di
Description: IDE drivers
Package: hypervisor-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: hypervisor-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: IBM 64bit hypervisor console modules
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-6
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.44
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.49
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>=
1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.33
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.47), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.48
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: eject-udeb
Status: install ok unpacked
Version: 2.1.4-2.1
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: ejects CDs from d-i menu
Installer-Menu-Item: 960
Package: firmware-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: Firmware request modules
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: pcmcia-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: pcmcia-modules
Depends: firmware-modules-2.6.18-4-powerpc64-di
Description: Common PCMCIA drivers
Package: env-preseed
Status: install ok unpacked
Version: 1.27
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.10
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.113
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.34
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.47), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb |
pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.27
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: fs-common-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: fs-common-modules
Depends: kernel-image-2.6.18-4-powerpc64-di
Description: Common filesystem support
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.113
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firewire-core-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-powerpc64-di,
kernel-image-2.6.18-4-powerpc64-di
Description: Core FireWire drivers
Package: input-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: input-modules
Depends: kernel-image-2.6.18-4-powerpc64-di, usb-modules-2.6.18-4-powerpc64-di
Description: Input devices support
Package: cdrom-detect
Status: install ok installed
Version: 1.19
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: pcmcia-storage-modules-2.6.18-4-powerpc64-di
Status: install ok unpacked
Version: 1.28
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-powerpc64-di,
cdrom-core-modules-2.6.18-4-powerpc64-di,
pcmcia-modules-2.6.18-4-powerpc64-di
Description: PCMCIA storage drivers
Package: debian-installer
Status: install ok installed
Version: powerpc64-cdrom-20070215-04:40
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.19
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.19
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.19
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 636
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.74
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.48), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab,
archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19),
gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 328
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.12
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.47), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.13
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.49
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 444
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext2-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
fs-common-modules-2.6.18-4-powerpc64-di
Provides: ext2-modules
Description: EXT2 filesystem support
This package contains the EXT2 filesystem module for the Linux kernel.
Package: ext3-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 432
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
fs-common-modules-2.6.18-4-powerpc64-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
fs-common-modules-2.6.18-4-powerpc64-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux
kernel.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.8
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab,
bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 308
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: hfs-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 280
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
fs-common-modules-2.6.18-4-powerpc64-di
Provides: hfs-modules
Description: HFS filesystem support
This package contains the HFS and HFS+ filesystem modules for the Linux
kernel.
Package: jfs-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
fs-common-modules-2.6.18-4-powerpc64-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1176
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 48
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 2076
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-12
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 80
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.12-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 380
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 28
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: loop-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 492
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-3
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: mac-fdisk-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 44
Maintainer: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Version: 0.1-14
Depends: libc6 (>= 2.3.5-1)
Description: Apple disk partition manipulation tool
The fdisk utilities from the MkLinux project, adopted for Linux/m68k.
Mac-fdisk allows you to create and edit the partition table of a disk.
It supports only the Apple partition format used on Macintosh and PowerMac,
use pmac-fdisk for PC partition format disks as used on PowerPC machines.
Mac-fdisk is an interactive tool with a menu similar to PC fdisk, supported
options are somewhat different from PC fdisk due to the differences in
partition format.
.
This is a minimal mac-fdisk package used by the debian-installer.
Package: md-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 728
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 200
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-8
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 408
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2),
partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 192
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.27
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
nic-shared-modules-2.6.18-4-powerpc64-di,
firmware-modules-2.6.18-4-powerpc64-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2004
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
nic-shared-modules-2.6.18-4-powerpc64-di,
firmware-modules-2.6.18-4-powerpc64-di,
firewire-core-modules-2.6.18-4-powerpc64-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 960
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
nic-shared-modules-2.6.18-4-powerpc64-di,
nic-extra-modules-2.6.18-4-powerpc64-di, pcmcia-modules-2.6.18-4-powerpc64-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 332
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.47),
libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 76
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 484
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 66
Depends: cdebconf-udeb, di-utils, partman-base (>= 99),
partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 4
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14),
partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59),
partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 4
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems,
partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 892
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 103
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb,
partman-partitioning, partman-target, archdetect, harddrive-detection,
di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives,
created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 51
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils
(>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 884
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 19
Depends: partman-base (>= 87), libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 50
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules,
lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 31
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-newworld
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 16
Depends: partman-base, hfs-modules
Description: partman support for new-world PowerMac boot partitions
This package provides the 'newworld' partition use method. The yaboot
boot loader used on PCI-era PowerMac systems requires a special
Apple_Bootstrap partition, created by this method.
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 45
Depends: cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules,
partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods,
di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 32
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.11
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 484
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 716
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di,
scsi-core-modules-2.6.18-4-powerpc64-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1504
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: scsi-modules-2.6.18-4-powerpc64-di,
scsi-core-modules-2.6.18-4-powerpc64-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 304
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.15
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-powerpc64-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 892
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: kernel-image-2.6.18-4-powerpc64-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 272
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.18-1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: yaboot-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 292
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1.9
Depends: kernel-installer, partconf-find-partitions (>= 1.08), di-utils (>=
1.15), di-utils-mapdevfs, os-prober, archdetect
Provides: bootable-system
Description: Install yaboot on a hard disk
This package will install yaboot on the hard disk.
Installer-Menu-Item: 73
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: powerpc (ppc64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-3-powerpc64
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Reply to: