Bug#277105: installation-reports
Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso (pre-rc2 downloaded the 10/17/04)
uname -a: Linux sarge 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686 GNU/Linux
Date: 10/17/04 at 10:36 pm
Method: standard installation (linux) from burned iso image (netinst CD image, with Debian base) Proxied?> no proxy
Machine: Custom server (I440LX motherboard)
Processor: Dual-Pentium II 300 Mhz
Memory: 256 Mo
Root Device: SCSI IBM drive 9.1 GB 1000rpm
Root Size/partition table:
Disk Drive: /dev/sdb
Size: 9173114880 bytes, 9173 MB
Heads: 255 Sectors per Track: 63 Cylinders: 1115
Name Flags Part Type FS Type [Label] Size (MB)
sdb1 Primary Linux ext3 [/] 296,12
sdb2 Primary Linux swap 764,96
sdb3 Primary Linux ext3 [/boot] 24,68
sdb5 Logical Linux ext3 [/tmp] 1003,49
sdb6 Logical Linux ext3 [/var] 1003,49
sdb7 Logical Linux ext3 [/usr] 3997,49
sdb8 Logical Linux ext3 [/home] 2081,00
<file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sdb1 / ext3 defaults,errors=remount-ro 0 1
/dev/sdb3 /boot ext3 defaults 0 2
/dev/sdb8 /home ext3 noatime 0 2
/dev/sdb5 /tmp ext3 noatime 0 2
/dev/sdb7 /usr ext3 noatime 0 2
/dev/sdb6 /var ext3 noatime 0 2
/dev/sdb2 none swap sw 0 0
/dev/scd0 /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/scd1 /media/cdrom1 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
0000:00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:00:06.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891
0000:00:09.0 Display controller: Texas Instruments TVP4020 [Permedia 2] (rev 01)
0000:00:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 30)
0000:00:00.0 0600: 8086:7190 (rev 02)
0000:00:01.0 0604: 8086:7191 (rev 02)
0000:00:04.0 0601: 8086:7110 (rev 02)
0000:00:04.1 0101: 8086:7111 (rev 01)
0000:00:04.2 0c03: 8086:7112 (rev 01)
0000:00:04.3 0680: 8086:7113 (rev 02)
0000:00:06.0 0100: 9005:001f
0000:00:09.0 0380: 104c:3d07 (rev 01)
0000:00:0b.0 0200: 10b7:9200 (rev 30)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
No problems observed during install and after reboot. All working done !
Reply to: