Bug#269442: Package: installation-reports
Package: installation-reports
Debian-installer-version: 01-Aug-2004 11:40
/debian/dists/testing/main/installer-i386/rc1/images/floppy
uname -a:
Linux kayak 2.4.27-1-686 #1 Sun Aug 15 01:13:41 UTC 2004 i686 GNU/Linux
Date: Aug 27, 2004
Method: bootfloppy-image.img
If network install, from where? ftp://ftp.us.debian.org/...../testing
Proxied? No
Machine: HP Kayak XU800MT
Processor: x86 Family 6 Model 8 Stepping 6
Memory: 256 MB
Root Device: SCSI QUANTUM ATLAS10K2-TY092L
/dev/sda3
Root Size/partition table:
Name Flags Part Type FS Type Size (MB)
disc1 Primary Compaq diagnostics 16.46
disc2 Primary W95 FAT32 6456.85
disc3 Boot Primary Linux ext2 2500.49
disc4 Primary Linux swap 123.38
# lspci
0000:00:00.0 Host bridge: Intel Corp. 82840 840 (Carmel) Chipset Host Bridge
(Hub A) (rev 01)
0000:00:01.0 PCI bridge: Intel Corp. 82840 840 (Carmel) Chipset AGP Bridge (rev 01)
0000:00:02.0 PCI bridge: Intel Corp. 82840 840 (Carmel) Chipset PCI Bridge (Hub
B) (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
0000:01:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24
[CrystalClear SoundFusion Audio Accelerator] (rev 01)
0000:01:0b.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
0000:02:1f.0 PCI bridge: Intel Corp. 82806AA PCI64 Hub PCI Bridge (rev 02)
0000:03:00.0 PIC: Intel Corp. 82806AA PCI64 Hub Advanced Programmable Interrupt
Controller (rev 01)
0000:03:09.0 SCSI storage controller: Adaptec AIC-7892P U160/m (rev 02)
0000:04:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04)
# lspci -n
0000:00:00.0 0600: 8086:1a21 (rev 01)
0000:00:01.0 0604: 8086:1a23 (rev 01)
0000:00:02.0 0604: 8086:1a24 (rev 01)
0000:00:1e.0 0604: 8086:2418 (rev 02)
0000:00:1f.0 0601: 8086:2410 (rev 02)
0000:00:1f.1 0101: 8086:2411 (rev 02)
0000:00:1f.2 0c03: 8086:2412 (rev 02)
0000:00:1f.3 0c05: 8086:2413 (rev 02)
0000:01:05.0 0401: 1013:6003 (rev 01)
0000:01:0b.0 0200: 1113:1211 (rev 10)
0000:02:1f.0 0604: 8086:1360 (rev 02)
0000:03:00.0 0800: 8086:1161 (rev 01)
0000:03:09.0 0100: 9005:008f (rev 02)
0000:04:00.0 0300: 102b:0525 (rev 04)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
Everything worked perfectly. Thanks!
--
Olivier Schreiber OSchreiber.ae90@gtalumni.org H323 464 5818
Reply to: