Bug#266547: (no subject)
Package: installation-reports
INSTALL REPORT
Debian-installer-version: CVS Netinstall ISO 20040816
uname -a: Linux niobe 2.6.7-powerpc #1 Thu Aug 5 23:48:59 CEST 2004 ppc GNU/Linux
Date: 17.08.2004
Method: How did you install?
* Netinstall with ISO holding base-debs
What did you boot off?
* tried CD-Rom, didn't work, tried yaboot, didn't work. Contacted
debian-powerpc@l.d.o and was enlightened that i have an "oldworld Mac".
Got BootX from the Net (was not included on CD) and bootet the powerpc
vmlinux with initrd (2.6.7 kernel). Worked ok.
If network install, from where? Proxied?
* I was intending to leech the rest off the net, yet everything d-i
needed was on the CD already. Thus i didn't need the Inet connection.
Machine: Apple PowerPC 233MHz (oldworld, no idea what exact model)
processor : 0
cpu : 740/750
temperature : 23-25 C (uncalibrated)
clock : 233MHz
revision : 2.1 (pvr 0008 0201)
bogomips : 465.92
machine : Power Macintosh
motherboard : AAPL,Gossamer MacRISC
detected as : 48 (PowerMac G3 (Gossamer))
pmac flags : 00000000
L2 cache : 512K unified pipelined-syncro-burst
memory : 320MB
pmac-generation : OldWorld
Memory: 320MB
Root Device: /dev/hda8 (QUANTUM FIREBALL ST4300A, ATA DISK drive)
Root Size/partition table:
# mac-fdisk -l
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Driver_ATA Macintosh 54 @ 64 ( 27.0k) Unknown
/dev/hda3 Apple_Driver_ATA Macintosh 74 @ 118 ( 37.0k) Unknown
/dev/hda4 Apple_Driver_IOKit Macintosh 512 @ 192 (256.0k) Unknown
/dev/hda5 Apple_Patches Patch Partition 512 @ 704 (256.0k) Unknown
/dev/hda6 Apple_HFS Ohne Titel 2048000 @ 1216 (1000.0M) HFS
/dev/hda7 Apple_UNIX_SVR2 swap 1757813 @ 2049216 (858.3M) Linux swap
/dev/hda8 Apple_UNIX_SVR2 untitled 4611787 @ 3807029 ( 2.2G) Linux native
Block size=512, Number of Blocks=8418816
DeviceType=0x0, DeviceId=0x0
Drivers-
1: @ 64 for 21, type=0x701
2: @ 118 for 34, type=0xf8ff
/dev/hda8 is root, /dev/hda7 is swap, /dev/hda6 is the MacOS 9.1 partition (not currently mounted)
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
0000:00:10.0 ff00: Apple Computer Inc. Heathrow Mac I/O (rev 01)
0000:00:12.0 VGA compatible controller: ATI Technologies Inc 3D Rage I/II 215GT [Mach64 GT] (rev 9a)
# lspci -n
0000:00:00.0 0600: 1057:0002 (rev 40)
0000:00:10.0 ff00: 106b:0010 (rev 01)
0000:00:12.0 0300: 1002:4754 (rev 9a)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
After some hazle to find out this was an oldworld Mac, the boot went
pretty straight. Quik didn't want to install onto ext3 -> start over,
made a /boot in ext2 format. Quik wanted /boot and / on one partition
-> start over, removed /boot, made / ext2. Quick from the d-i CD
couldn't install for some reason -> always getting red screen telling it
didn't work. No HFS partition mountable without specifying debconf-prio
to medium (which i didn't supply), thus no copying of vmlinux and initrd
from the installed Debian to HFS. Copied to the network and moved back
from MacOS. Could boot Debian with new kernel (after i had found out i
do need the initrd image too) and upgraded to SID. Now quik installed ok
onto /dev/hda8. Yet no effect while bootup, still facing MacOS without
any question if i'd prefer to have Debian. Before this successful
booting, i had tried to boot with the d-i CD vmlinux and no initrd to
root=/dev/hda8 => Kernel panic, no root found. Neither as /dev/hda8 nor
as /dev/ide/host0/bus0/target0/lun0/part8.
Concluding, i'd wish to see some small MacOS tool on the d-i CD that i
could run and which would tell me "You have an oldworld Mac. Go and get
BootX NOW". That way i'd be easier to not loose like 3h to yaboot and
OpenFirmware trying to make it work in vain. Apart from that, if BootX
could be shipped on the d-i CD aswell, that might help doing just a
quick test too I still wonder what's wrong with the quik setup. There's
no errors anymore, everything works ok and tells me that it's installed
now. Yet i don't get around the MacOS->BootX->Debian sequence.
(Install logs and other status info is available in /var/log/debian-installer/.)
Please let me know if you need anything else.
--
Best regards,
Kilian
Reply to: