Bug#265698: Sarge-Installation with the Debian-Inbstaller Beta 3
Package: installation-reports
Debian-installer-version: Beta 3, http://www.debian.de
uname -a: Linux mux 2.6.8-rc1-rh #9 Sat Jul 17 16:14:23 CEST 2004 i686
GNU/Linux
Date: Jul 16 20:41:35
Method: Installation with kernel 2.6, booted from Net-Install-CD, packages
from http://debian.tu-bs.de/debian, no proxy was used
Machine: Acer Aspire 1513LMi
Processor: Athlon64 3400+, 2200 MHz
Memory: 512 MB
Root Device: IDE, hda: IC25N060ATMR04-0, ATA DISK drive
Root Size/partition table:
# fdisk -l /dev/hda
Disk /dev/hda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 12 96358+ 83 Linux /boot
/dev/hda2 13 7296 58508730 5 Extended
/dev/hda5 13 73 489951 82 Linux swap SWAP
/dev/hda6 74 2505 19535008+ 83 Linux /
/dev/hda7 2506 2511 48163+ 83 Linux /mnt/other-linux
/dev/hda8 2512 3727 9767488+ 83
Linux /mnt/other-linux/boot
/dev/hda9 3728 7296 28667961 83 Linux /data
Output of lspci:
# lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio
(rev a2)
0000:00:06.1 Modem: nVidia Corporation: Unknown device 00d9 (rev a2)
0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device
0348 (rev a1)
0000:02:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
Gigabit Ethernet (rev 03)
0000:02:07.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus
Controller (rev 02)
0000:02:07.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394
Controller
0000:02:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03)
Base System Installation Checklist:
Initial boot worked: [o]
Configure network HW: [o]
Config network: [ o]
Detect CD: [ o]
Load installer modules: [ o]
Detect hard drives: [ o]
Partition hard drives: [ o]
Create file systems: [ o]
Mount partitions: [ o]
Install base system: [ o]
Install boot loader: [ o]
Reboot: [ o]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
I did a partition-plan on a paper before Installation and thought on my
preinstalled WinXP, that was erased during installation! ;))
Further comments and reports are available (in german) on:
http://www.tuxschild.de/mux.php
--
Robin Haunschild
<H@unschild.de>
http://www.tuxschild.de
294925612@icq
.''`. Ha Psi ist gleich Eh Psi
: :' : -Niemals aufgeben, niemals kapitulieren-
`. `'` *Linux* - apt-get into it
`-
Bitte senden Sie mir keine Word-, Excel- oder PowerPoint-Anhänge.
Siehe http://www.fsf.org/philosophy/no-word-attachments.de.html
Reply to: