Bug#255109: INSTALL REPORT
Package: installation-reports
INSTALL REPORT
Debian-installer-version: <Debian Sarge Release Candidate 1 iso, off
debian.org>
uname -a: <Linux Raiz-mpx 2.6.6-smp.gnu #1 SMP Sun Jun 13 11:26:14 CDT
2004 i68 GNU/Linux>
> note not original kernel,
Date: <June 8th 2004>
Method: How did you install? boot off cdr, netinstall iso.
Machine: <Tyan Tiger mp 2460>
Processor:Dual AMD Athlon MP 1.2 gig
Memory:768 MBs
Root Device: <IDE Maxtor 120 gig hard driver pata /dev/hdc6>
Root Size/partition table: <file system> <mount point> <type>
<options> $
proc /proc proc defaults 0 0
/dev/hdc6 / xfs defaults 0 1
/dev/hdc5 /boot ext3 defaults 0 2
/dev/hdc8 /home xfs defaults 0 2
/dev/hdc7 /usr xfs defaults 0 2
/dev/hdc9 none swap sw 0 0
/dev/hdb /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/hda /media/cdrom1 iso9660 rw,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP
[IGD4-2P] System Controller (rev 11)
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP
[IGD4-2P] AGP Bridge
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766
[ViperPlus] ISA (rev 02)
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766
[ViperPlus] IDE (rev 01)
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus]
ACPI (rev 01)
0000:00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766
[ViperPlus] USB (rev 07)
0000:00:0a.0 USB Controller: OPTi Inc. 82C861 (rev 20)
0000:00:0a.1 USB Controller: OPTi Inc. 82C861 (rev 20)
0000:00:0c.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet
100/10 MBit (rev 31)
0000:00:0d.0 Multimedia audio controller: C-Media Electronics Inc CM8738
(rev 10)
0000:01:05.0 VGA compatible controller: nVidia Corporation NV11
[GeForce2 MX/MX 400] (rev b2)
0000:00:00.0 Class 0600: 1022:700c (rev 11)
0000:00:01.0 Class 0604: 1022:700d
0000:00:07.0 Class 0601: 1022:7410 (rev 02)
0000:00:07.1 Class 0101: 1022:7411 (rev 01)
0000:00:07.3 Class 0680: 1022:7413 (rev 01)
0000:00:07.4 Class 0c03: 1022:7414 (rev 07)
0000:00:0a.0 Class 0c03: 1045:c861 (rev 20)
0000:00:0a.1 Class 0c03: 1045:c861 (rev 20)
0000:00:0c.0 Class 0200: 1282:9009 (rev 31)
0000:00:0d.0 Class 0401: 13f6:0111 (rev 10)
0000:01:05.0 Class 0300: 10de:0110 (rev b2)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
<Since I do not follow debian.maint.boot, it would be nice to include an
option to make a grub boot disk.
Also of important note to users who use the Linux26 option, is the
confusion of mounting swap I was expecting to see swap as a mount option
like root/ boot/ usr/ $
I did not know it was in the other menu, but otherwise very good. I
also noticed that you gave warnings about having XFS filesystems and
grub. According to Grub XFS support is included, so no need for the
warning, on ext3 boot partition.
##Important I do not know if this was covered on the mailing lists,
googe did not turn anything up. But the installer does not install a
SMP kernel, the kernel it installed was only for uniprocessors.
I even had to compile a new kernel, and to find out that the SMP
sections where missing. I had to download a SMP kernel image and then
use its config file to get the missing smp compatible parts. Some people
will not know how to do this, or will think they are having dual CPUs
when top, or proc only shows one. Maybe you mentioned it in the HOWTO,
but for some reason I missed it.##>$
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: