Re: Thecus n2100 / Allnet ALL6500
On To, 2006-06-01, 22:54, Richard Atterer skrev:
> On Thu, Jun 01, 2006 at 10:16:06PM +0200, David Karlström wrote:
>> http://david.thg.se/n2100/
>
> Yeah, great work, thanks! :-)
>
> But I guess that you _will_ have to reprogram the flash to boot into
> Debian
> without another machine on the serial port, right? Or does Redboot allow a
> simple way of changing the boot settings?
You can change the bootscript from Redboot:
RedBoot> fconfig
Run script at boot: true
Boot script:
.. fis load ramdisk
.. fis load kernel
.. exec
Enter script, terminate with empty line
>> load vmlinux -b 0x00200000
>> exec -c "console=ttyS0,115200 root=/dev/sda1 mem=512M@0xa0000000"
>>
Boot script timeout (1000ms resolution): 5
Use BOOTP for network configuration: false
Gateway IP address:
Local IP address: 192.168.0.7
Local IP address mask: 255.255.0.0
Default server IP address: 192.168.0.6
Console baud rate: 115200
DNS server IP address:
GDB connection port: 9000
HW Status: 0
Force console for special debug messages: false
MAC address: 0x00:0x14:0xFD:0x10:0x1A:0x32
MAC address 2: 0x00:0x14:0xFD:0x10:0x1A:0x33
Network debug at boot time: false
Reset default:
Serial number: N2100
... Unlock from 0xf0fc0000-0xf0fc1000: .
... Erase from 0xf0fc0000-0xf0fc1000: .
... Program from 0x1ffd2000-0x1ffd3000 at 0xf0fc0000: .
... Lock from 0xf0fc0000-0xf0fc1000: .
RedBoot>
It will fill in the current settings, so its just enter on most of the lines.
Flashing the kernel to flash shouldn't be a problem. But if you screw
up... havn't found the JTAG yet...
/David
Reply to: