Re: Can anyone tell why do I get this error
On Sat, Sep 30, 2006 at 03:07:53AM -0700, chindea mihai wrote:
> I tried a several times to install the AMD64 Etch, and every time I got this error in syslog.
>
> kernel: ata4: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
> kernel: ata4: dev 0 ATAPI, max UDMA/33
> kernel: ata4: dev 1 cfg 49:0b00 82:0218 83:4000 84:4000 85:0218 86:0000 87:4000 88:203f
> kernel: ata4: dev 1 ATAPI, max UDMA/100
> kernel: ata4: dev 0 configured for UDMA/33
> kernel: ata4: dev 1 configured for UDMA/33
> kernel: scsi3 : ata_piix
> kernel: ata4(0): WARNING: ATAPI is disabled, device ignored.
> kernel: ata4(1): WARNING: ATAPI is disabled, device ignored.
>
> If I type dmesg | grep ATAPI in the Console, I get this messages:
> # dmesg | grep ATAPI
> ata4: dev 0 configured for UDMA/33
> ata4: dev 1 configured for UDMA/33
> ata4(0): WARNING: ATAPI is disabled, device ignored
> ata4(1): WARNING: ATAPI is disabled, device ignored.
>
> So can anyone tell me, what should I do, to make it works?
Looks like you are using a kernel with libata in use, which either means
you have an sata dvd drive, or a kernel new enough to use libata for
everything. If either is the case try adding: libata.enableatapi=1 to
the kernel boot options to turn on ATAPI support in libata. That is
required for ATAPI devices to with work libata (for now, it will go away
later when support will always be on).
Which kernel are you using and what type of DVD drive do you have?
--
Len Sorensen
Reply to: