[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: kernel-image-2.6.7

On Mon, 9 Aug 2004, Christian T. Steigies wrote:
> I just uploaded some 2.6.7 kernel-images to
> http://people.debian.org/~cts/debian-m68k/kernel-image/

And I tried it on my Amiga 4000/040 (12 MB Fast RAM, Ariadne Ethernet).

First I had to gunzip the image, or the bootstrap complained about the
compressed image being too large.

Then I booted it with a ramdisk (the good old
filesys-ELF-2.0.x-1400K-2.gz). Worked fine!

Then I tried to boot from hard disk (IDE), but it failed because it
didn't detect my hard disks.

Perhaps the IDE doubler support is the problem? I'll enable it in my
2.6.8.1 kernel and 'll see what happens...

For reference, I attached the dmesg outputs for 2.6.7-amiga and for my
own 2.6.8.1.

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds
Linux version 2.6.7-amiga (root@skeeve) (gcc version 3.3.3 (Debian 20040321)) #1 Sun Aug 8 17:30:07 CEST 2004
Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_PAL ZORRO3 
On node 0 totalpages: 3072
  DMA zone: 3072 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda3 debug=mem console=tty0 single -b
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 80x25
Linux version 2.6.7-amiga (root@skeeve) (gcc version 3.3.3 (Debian 20040321)) #1 Sun Aug 8 17:30:07 CEST 2004
Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_PAL ZORRO3 
On node 0 totalpages: 3072
  DMA zone: 3072 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda3 debug=mem console=tty0 single -b
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 80x25
Memory: 9808k/12288k available (1656k kernel code, 688k data, 112k init)
Calibrating delay loop... 16.58 BogoMIPS
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
SCSI subsystem initialized
Zorro: Probing AutoConfig expansion devices: 1 device
fb0: Amiga AGA frame buffer device, using 1280K of video memory
audit: initializing netlink socket (disabled)
audit(1090487550.760:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Console: switching to colour frame buffer device 80x25
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide0: Gayle IDE interface (A4000 style)
mice: PS/2 mouse device common for all mice
input: Amiga keyboard
input: Amiga mouse at joy0dat
i8042.c: i8042 controller self test timeout.
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Cannot open root device "hda3" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)
 <1>amikbd: Ctrl-Amiga-Amiga reset warning!!

Linux version 2.6.8.1 (geert@anakin) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #32 Sun Aug 15 10:12:55 CEST 2004
Amiga hardware found: [A4000] VIDEO BLITTER AUDIO FLOPPY A4000_IDE KEYBOARD MOUSE SERIAL PARALLEL A3000_CLK CHIP_RAM PAULA LISA ALICE_PAL ZORRO3 
On node 0 totalpages: 3072
  DMA zone: 3072 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/hda3 fbcon=font:PEARL8x8 console=tty0 single -b BOOT_IMAGE=26t2
PID hash table entries: 16 (order 4: 128 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 10124k/12288k available (1520k kernel code, 528k data, 92k init)
Calibrating delay loop... 16.53 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
Zorro: Probing AutoConfig expansion devices: 1 device
fb0: Amiga AGA frame buffer device, using 1280K of video memory
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
Console: switching to colour frame buffer device 80x50
Amiga-builtin serial driver version 4.30
ttyS00 is the amiga builtin serial port
Generic RTC Driver v1.07
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
eth0: Ariadne at 0x00e90000, Ethernet Address 00:60:30:00:02:1a
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide0: Gayle IDE interface (A4000 style)
hda: QUANTUM FIREBALL1080A, ATA DISK drive
hdb: Conner Peripherals 545MB - CP30544, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x80dd2020 on irq 12
hda: max request size: 128KiB
hda: 2128896 sectors (1089 MB) w/83KiB Cache, CHS=2112/16/63
 hda: RDSK hda1 hda2 hda3 hda4 hda5 hda6
hdb: max request size: 128KiB
hdb: 1065456 sectors (545 MB) w/256KiB Cache, CHS=1057/16/63
 hdb: RDSK hdb1 hdb2
mice: PS/2 mouse device common for all mice
input: Amiga keyboard
input: Amiga mouse at joy0dat
input: Amiga joystick at joy1dat
input: m68k beeper
Amiga DMA sound driver rev 016 installed
Core driver edition 01.06 : AMIGA driver edition 00.04
Write will use    4 fragments of   32768 bytes as default
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
VFS: Mounted root (ext2 filesystem) readonly.
Adding 33256k swap on /dev/hda4.  Priority:-1 extents:1
Reply to: