Re: Amiga Woody Installation
Hi!
you wanted some information about my turbo board.
Well here is it:
The board is a E-Matrix 530 for Amiga 500.
68030 & 68882 @ 50 mhz, PS/2 ram up to 128 MB, kickrom socket
IDE controller: gayle
Fast SCSI-II controller: NCR, 53CF94-2
Note: not all boards are with the SCSI controller.
On my board is 24 MB and a 3.1 kickrom. There is no driver needed, it's
plug n play.
The amiboot line:
"amiboot-5.6 --model 5 -d -k linux.bin ro root=/dev/hda4 video=amifb:pal
nolangchooser ide=doubler"
The kernel can't find the IDE controller without the "--model 5" flag.
Here is some more info:
SysInfo V3.24:
--------------
|Board Address|Board Size|Board Type|Product|Manufacturer|Serial No|
|-------------+----------+----------+-------+------------+---------|
|$00E90000 | 64 K | ZORRO II | 36 | 2192 | 0 |
|$00EA0000 | 64 K | ZORRO II | 33 | 2192 | 0 |
What the kernel says:
Searching for SAVEKMSG magic...
Found 2787 bytes at 0x000e0008
>>>>>>>>>>>>>>>>>>>>
Linux version 2.2.20 (root@sparks) (gcc version 2.7.2.3) #1 Mon Mar 11
23:09:50 GMT 2002
Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD
MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA AGNUS_HR_PAL PCMCIA ZORRO
ide: Enabled support for IDE doublers
Console: colour dummy device 80x25
Calibrating delay loop... 12.36 BogoMIPS
Memory: 22708k/24576k available (1260k kernel code, 532k data, 76k init)
Dentry hash table entries: 4096 (order 3, 32k)
Buffer cache hash table entries: 32768 (order 5, 128k)
Page cache hash table entries: 8192 (order 3, 32k)
kmem_create: Forcing size word alignment - filp
VFS: Diskquotas version dquot_6.4.0 initialized
kmem_create: Forcing size word alignment - dquot
POSIX conformance testing by UNIFIX
Zorro: Probing AutoConfig expansion devices: 2 devices
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
kmem_create: Forcing size word alignment - sock
kmem_create: Forcing size word alignment - skbuff_head_cache
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
kmem_create: Forcing size word alignment - tcp_open_request
kmem_create: Forcing size word alignment - tcp_tw_bucket
TCP: Hash tables configured (ehash 32768 bhash 32768)
Initializing RT netlink socket
Starting kswapd v 1.5
Console: switching to colour frame buffer device 80x32
fb0: Amiga OCS frame buffer device, using 256K of video memory
clgen: Driver for Cirrus Logic based graphic boards, v1.4 ?
clgen: no supported board found.
M68K Serial driver version 1.01
ttyS0 at 0x80dff018: Amiga builtin
pty: 256 Unix98 ptys configured
Amiga mouse installed.
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
ide0: Gayle IDE interface (A1200 style)
ide1: IDE doubler
+++ Probing for IDE doubler... probe returned 0xffff (PLEASE REPORT THIS!!)
hda: Maxtor 2F040J0, ATA DISK drive
hdb: IOMEGA ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive
hdc: HITACHI CDR-7730, ATAPI CDROM drive
ide0 at 80da0000 on irq 0x0000000c
ide1 at 80da1000 on irq 0x0000000c (shared with ide0)
hda: Maxtor 2F040J0, 39205MB w/2048kB Cache, CHS=4998/255/63
hdc: ATAPI 4X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
FD: probing units
found <5>fd: drive 0 didn't identify, setting default ffffffff
fd0
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: RDSK hda1 hda2 hda3 hda4 hda5
VFS: Mounted root (ext2 filesystem) readonly.
Warning: unable to open an initial console.
Adding Swap: 463628k swap-space (priority -1)
hdb: No disk in drive
hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
hdb: The drive reports both 100663296 and 0 bytes as its capacity
Restarting system.
<<<<<<<<<<<<<<<<<<<<
That should be enough ;)
cu
Stefan Pietzonke
Reply to: