Bug#1065531: apt forced libexpat1 to be removed before python3.11-minimal
Package: apt,python3.11-minimal
Severity: normal
Control: affects -1 python3-scrapy
During piuparts testing of python3-scrapy piuparts asked apt to remove packages
including python3* and libexpat1, and libexpat1 was removed before e.g.
python3.11-minimal which depends on it, with dpkg printing a warning about this
fact. But as prerm of python3.11-minimal needs libexpat1, prerm and the apt
transaction failed with "/usr/bin/python3: error while loading shared
libraries: libexpat.so.1: cannot open shared object file". The full log is
currently available at
https://piuparts.debian.org/sid/fail/python3-scrapy_2.11.1-1.log and I'm also
attaching it. The relevant part is the last one.
There are several additional things to note:
1. "python3.11-minimal depends on libexpat1" is not the only dependency problem
reported for the transaction, there are several other problems reported later,
all involving python3{,.11} subpackages.
2. This happened during the t64 transition, involved versions of src:expat and
src:python3-defaults are older than that while src:python3.11 (= 3.11.8-2) is
related to it.
3. piuparts asked apt to remove (among other packages) libssl3t64 and install
libssl3:amd64=3.1.5-1, but libssl3* aren't related to libexpat1,
python3.11-minimal also doesn't depend on them.
-- System Information:
Debian Release: trixie/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'testing-debug'), (500, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.7.7-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Start: 2024-03-01 10:02:29 GMT
Package: python3-scrapy
Source: python-scrapy
Version: 2.11.1-1
Installed-Size: 1052
Maintainer: Debian Python Team <team+python@tracker.debian.org>
Architecture: all
Depends: python3-lxml, python3-pydispatch, python3-cryptography (>= 36.0.0), python3-cssselect, python3-itemadapter, python3-itemloaders, python3-openssl, python3-packaging, python3-parsel (>= 1.8.1), python3-pkg-resources, python3-protego, python3-queuelib, python3-service-identity, python3-tldextract, python3-twisted, python3-w3lib, python3-zope.interface, python3:any
Recommends: ipython3, python3-brotli, python3-pil
Suggests: python3-boto3, python3-botocore, python-scrapy-doc (= 2.11.1-1)
Description: Python web scraping and crawling framework (Python 3)
Homepage: https://scrapy.org/
Description-md5: de81941edea93a8d65f470aa9a6bbc8a
Section: python
Priority: optional
Filename: pool/main/p/python-scrapy/python3-scrapy_2.11.1-1_all.deb
Size: 259188
MD5sum: 74540053503bba92acf4db683413d6c7
SHA256: 449a3cce5c5ebf1fe93141cecc0088e14a7f2997eacb20bf9dd14b27048e2edf
Executing: sudo env PYTHONPATH=/srv/piuparts.debian.org/lib/python3/dist-packages timeout -s INT -k 5m 80m /srv/piuparts.debian.org/sbin/piuparts --scriptsdir /etc/piuparts/scripts-log-alternatives --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz -d sid --no-upgrade-test --apt python3-scrapy=2.11.1-1
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at https://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: The FAQ also explains how to contact us in case you think piuparts is wrong.
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 1.3.1~202401311836~1.3-2-g28295102 starting up.
0m0.0s INFO: Command line arguments: /srv/piuparts.debian.org/sbin/piuparts --scriptsdir /etc/piuparts/scripts-log-alternatives --scriptsdir /etc/piuparts/scripts --no-eatmydata --allow-database --warn-on-leftovers-after-purge --mirror 'http://deb.debian.org/debian/ main' --tmpdir /srv/piuparts.debian.org/tmp --arch amd64 -b /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz -d sid --no-upgrade-test --apt python3-scrapy=2.11.1-1
0m0.0s INFO: Running on: Linux piu-slave-ubc-01 5.10.0-28-amd64 #1 SMP Debian 5.10.209-2 (2024-01-31) x86_64
0m0.0s DEBUG: Created temporary directory /srv/piuparts.debian.org/tmp/tmpq3za2o4e
0m0.0s DEBUG: Unpacking /srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz into /srv/piuparts.debian.org/tmp/tmpq3za2o4e
0m0.0s DEBUG: Starting command: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz']
0m0.6s DEBUG: Command ok: ['tar', '-C', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', '--auto-compress', '-xf', '/srv/piuparts.debian.org/slave/basetgz/sid-merged-usr_amd64.tar.gz']
0m0.6s DEBUG: Starting command: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/proc']
0m0.6s DEBUG: Command ok: ['mount', '-t', 'proc', 'proc', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/proc']
0m0.6s DEBUG: Starting command: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/pts']
0m0.6s DEBUG: Command ok: ['mount', '-t', 'devpts', '-o', 'newinstance,noexec,nosuid,gid=5,mode=0620,ptmxmode=0666', 'devpts', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/pts']
0m0.6s DEBUG: Starting command: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/ptmx']
0m0.6s DEBUG: Command ok: ['mount', '-o', 'bind', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/pts/ptmx', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/ptmx']
0m0.6s DEBUG: Starting command: ['mount', '-o', 'bind', '/dev/pts/2', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/console']
0m0.6s DEBUG: Command ok: ['mount', '-o', 'bind', '/dev/pts/2', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/console']
0m0.6s DEBUG: Starting command: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/shm']
0m0.6s DEBUG: Command ok: ['mount', '-t', 'tmpfs', '-o', 'size=65536k', 'tmpfs', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/shm']
0m0.6s DEBUG: sources.list:
deb http://deb.debian.org/debian/ sid main
0m0.6s DEBUG: Created policy-rc.d and chmodded it.
0m0.6s DEBUG: Created resolv.conf.
0m0.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts-log-alternatives to /srv/piuparts.debian.org/tmp/tmpq3za2o4e/tmp/scripts/
0m0.6s DEBUG: Copying scriptsdir /etc/piuparts/scripts to /srv/piuparts.debian.org/tmp/tmpq3za2o4e/tmp/scripts/
0m0.6s INFO: Running scripts post_chroot_unpack
0m0.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated']
0m0.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_chroot_unpack_allow_unauthenticated']
0m0.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', 'update']
0m4.9s DUMP:
Get:1 http://deb.debian.org/debian sid InRelease [198 kB]
Get:2 http://deb.debian.org/debian sid/main amd64 Packages [9906 kB]
Get:3 http://deb.debian.org/debian sid/main Translation-en [7213 kB]
Fetched 17.3 MB in 3s (5555 kB/s)
Reading package lists...
0m4.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', 'update']
0m4.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', '-yf', 'dist-upgrade']
0m10.1s DUMP:
Reading package lists...
Building dependency tree...
Calculating upgrade...
The following packages will be REMOVED:
libcom-err2 libext2fs2 libgnutls30 libss2 libuuid1
The following NEW packages will be installed:
libcom-err2t64 libext2fs2t64 libgnutls30t64 libss2t64 libuuid1t64
The following packages will be upgraded:
apt bsdutils e2fsprogs libapt-pkg6.0t64 libblkid1 libc-bin libc6 libmount1
libpam-modules libpam-modules-bin libpam-runtime libsmartcols1 logsave mount
sysvinit-utils util-linux
16 upgraded, 5 newly installed, 5 to remove and 0 not upgraded.
Need to get 10.4 MB of archives.
After this operation, 7168 B disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main amd64 bsdutils amd64 1:2.39.3-6.1 [97.0 kB]
Get:2 http://deb.debian.org/debian sid/main amd64 libss2t64 amd64 1.47.0-2.3 [24.9 kB]
Get:3 http://deb.debian.org/debian sid/main amd64 libcom-err2t64 amd64 1.47.0-2.3 [20.2 kB]
Get:4 http://deb.debian.org/debian sid/main amd64 libc6 amd64 2.37-15.1 [2752 kB]
Get:5 http://deb.debian.org/debian sid/main amd64 libext2fs2t64 amd64 1.47.0-2.3 [206 kB]
Get:6 http://deb.debian.org/debian sid/main amd64 libuuid1t64 amd64 2.39.3-6.1 [30.0 kB]
Get:7 http://deb.debian.org/debian sid/main amd64 util-linux amd64 2.39.3-6.1 [1231 kB]
Get:8 http://deb.debian.org/debian sid/main amd64 logsave amd64 1.47.0-2.3 [19.9 kB]
Get:9 http://deb.debian.org/debian sid/main amd64 e2fsprogs amd64 1.47.0-2.3 [571 kB]
Get:10 http://deb.debian.org/debian sid/main amd64 libapt-pkg6.0t64 amd64 2.7.13+b1 [984 kB]
Get:11 http://deb.debian.org/debian sid/main amd64 libgnutls30t64 amd64 3.8.3-1.1 [1425 kB]
Get:12 http://deb.debian.org/debian sid/main amd64 apt amd64 2.7.13+b1 [1368 kB]
Get:13 http://deb.debian.org/debian sid/main amd64 libc-bin amd64 2.37-15.1 [602 kB]
Get:14 http://deb.debian.org/debian sid/main amd64 sysvinit-utils amd64 3.08-7 [32.2 kB]
Get:15 http://deb.debian.org/debian sid/main amd64 libpam-modules-bin amd64 1.5.3-6 [54.2 kB]
Get:16 http://deb.debian.org/debian sid/main amd64 libpam-modules amd64 1.5.3-6 [260 kB]
Get:17 http://deb.debian.org/debian sid/main amd64 mount amd64 2.39.3-6.1 [143 kB]
Get:18 http://deb.debian.org/debian sid/main amd64 libpam-runtime all 1.5.3-6 [140 kB]
Get:19 http://deb.debian.org/debian sid/main amd64 libblkid1 amd64 2.39.3-6.1 [159 kB]
Get:20 http://deb.debian.org/debian sid/main amd64 libmount1 amd64 2.39.3-6.1 [191 kB]
Get:21 http://deb.debian.org/debian sid/main amd64 libsmartcols1 amd64 2.39.3-6.1 [116 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 10.4 MB in 0s (47.0 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Preparing to unpack .../bsdutils_1%3a2.39.3-6.1_amd64.deb ...
Unpacking bsdutils (1:2.39.3-6.1) over (1:2.39.3-6) ...
Setting up bsdutils (1:2.39.3-6.1) ...
dpkg: libss2:amd64: dependency problems, but removing anyway as you requested:
e2fsprogs depends on libss2 (>= 1.38).
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Removing libss2:amd64 (1.47.0-2+b1) ...
Selecting previously unselected package libss2t64:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5228 files and directories currently installed.)
Preparing to unpack .../libss2t64_1.47.0-2.3_amd64.deb ...
Unpacking libss2t64:amd64 (1.47.0-2.3) ...
dpkg: libcom-err2:amd64: dependency problems, but removing anyway as you requested:
e2fsprogs depends on libcom-err2 (>= 1.43.9).
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Removing libcom-err2:amd64 (1.47.0-2+b1) ...
Selecting previously unselected package libcom-err2t64:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5228 files and directories currently installed.)
Preparing to unpack .../libcom-err2t64_1.47.0-2.3_amd64.deb ...
Unpacking libcom-err2t64:amd64 (1.47.0-2.3) ...
Preparing to unpack .../libc6_2.37-15.1_amd64.deb ...
Unpacking libc6:amd64 (2.37-15.1) over (2.37-15) ...
Setting up libc6:amd64 (2.37-15.1) ...
dpkg: libext2fs2:amd64: dependency problems, but removing anyway as you requested:
e2fsprogs depends on libext2fs2 (= 1.47.0-2+b1).
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Removing libext2fs2:amd64 (1.47.0-2+b1) ...
Selecting previously unselected package libext2fs2t64:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5226 files and directories currently installed.)
Preparing to unpack .../libext2fs2t64_1.47.0-2.3_amd64.deb ...
Unpacking libext2fs2t64:amd64 (1.47.0-2.3) ...
dpkg: libuuid1:amd64: dependency problems, but removing anyway as you requested:
util-linux depends on libuuid1 (>= 2.16).
e2fsprogs depends on libuuid1 (>= 2.16).
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Removing libuuid1:amd64 (2.39.3-6) ...
Selecting previously unselected package libuuid1t64:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5228 files and directories currently installed.)
Preparing to unpack .../libuuid1t64_2.39.3-6.1_amd64.deb ...
Unpacking libuuid1t64:amd64 (2.39.3-6.1) ...
Setting up libuuid1t64:amd64 (2.39.3-6.1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5235 files and directories currently installed.)
Preparing to unpack .../util-linux_2.39.3-6.1_amd64.deb ...
Unpacking util-linux (2.39.3-6.1) over (2.39.3-6) ...
Setting up util-linux (2.39.3-6.1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5235 files and directories currently installed.)
Preparing to unpack .../logsave_1.47.0-2.3_amd64.deb ...
Unpacking logsave (1.47.0-2.3) over (1.47.0-2+b1) ...
Setting up libcom-err2t64:amd64 (1.47.0-2.3) ...
Setting up libext2fs2t64:amd64 (1.47.0-2.3) ...
Setting up libss2t64:amd64 (1.47.0-2.3) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.47.0-2.3_amd64.deb ...
Unpacking e2fsprogs (1.47.0-2.3) over (1.47.0-2+b1) ...
dpkg: warning: unable to delete old directory '/lib/udev/rules.d': Directory not empty
dpkg: warning: unable to delete old directory '/lib/udev': Directory not empty
dpkg: warning: unable to delete old directory '/lib/systemd/system': Directory not empty
dpkg: warning: unable to delete old directory '/lib/systemd': Directory not empty
Preparing to unpack .../libapt-pkg6.0t64_2.7.13+b1_amd64.deb ...
Unpacking libapt-pkg6.0t64:amd64 (2.7.13+b1) over (2.7.13) ...
Setting up libapt-pkg6.0t64:amd64 (2.7.13+b1) ...
dpkg: libgnutls30:amd64: dependency problems, but removing anyway as you requested:
apt depends on libgnutls30 (>= 3.8.1).
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5232 files and directories currently installed.)
Removing libgnutls30:amd64 (3.8.3-1) ...
Selecting previously unselected package libgnutls30t64:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5204 files and directories currently installed.)
Preparing to unpack .../libgnutls30t64_3.8.3-1.1_amd64.deb ...
Unpacking libgnutls30t64:amd64 (3.8.3-1.1) ...
Setting up libgnutls30t64:amd64 (3.8.3-1.1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5233 files and directories currently installed.)
Preparing to unpack .../apt_2.7.13+b1_amd64.deb ...
Unpacking apt (2.7.13+b1) over (2.7.13) ...
Setting up apt (2.7.13+b1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.37-15.1_amd64.deb ...
Unpacking libc-bin (2.37-15.1) over (2.37-15) ...
Setting up libc-bin (2.37-15.1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Preparing to unpack .../sysvinit-utils_3.08-7_amd64.deb ...
Unpacking sysvinit-utils (3.08-7) over (3.08-6) ...
dpkg: warning: unable to delete old directory '/lib/lsb/init-functions.d': Directory not empty
dpkg: warning: unable to delete old directory '/lib/lsb': Directory not empty
dpkg: warning: unable to delete old directory '/lib/init': Directory not empty
Setting up sysvinit-utils (3.08-7) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Preparing to unpack .../libpam-modules-bin_1.5.3-6_amd64.deb ...
Unpacking libpam-modules-bin (1.5.3-6) over (1.5.3-4) ...
Setting up libpam-modules-bin (1.5.3-6) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5234 files and directories currently installed.)
Preparing to unpack .../libpam-modules_1.5.3-6_amd64.deb ...
Unpacking libpam-modules:amd64 (1.5.3-6) over (1.5.3-4) ...
Setting up libpam-modules:amd64 (1.5.3-6) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5232 files and directories currently installed.)
Preparing to unpack .../mount_2.39.3-6.1_amd64.deb ...
Unpacking mount (2.39.3-6.1) over (2.39.3-6) ...
Preparing to unpack .../libpam-runtime_1.5.3-6_all.deb ...
Unpacking libpam-runtime (1.5.3-6) over (1.5.3-4) ...
Setting up libpam-runtime (1.5.3-6) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5232 files and directories currently installed.)
Preparing to unpack .../libblkid1_2.39.3-6.1_amd64.deb ...
Unpacking libblkid1:amd64 (2.39.3-6.1) over (2.39.3-6) ...
Setting up libblkid1:amd64 (2.39.3-6.1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5232 files and directories currently installed.)
Preparing to unpack .../libmount1_2.39.3-6.1_amd64.deb ...
Unpacking libmount1:amd64 (2.39.3-6.1) over (2.39.3-6) ...
Setting up libmount1:amd64 (2.39.3-6.1) ...
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5232 files and directories currently installed.)
Preparing to unpack .../libsmartcols1_2.39.3-6.1_amd64.deb ...
Unpacking libsmartcols1:amd64 (2.39.3-6.1) over (2.39.3-6) ...
Setting up libsmartcols1:amd64 (2.39.3-6.1) ...
Setting up logsave (1.47.0-2.3) ...
Setting up mount (2.39.3-6.1) ...
Setting up e2fsprogs (1.47.0-2.3) ...
Processing triggers for libc-bin (2.37-15.1) ...
0m10.1s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', '-yf', 'dist-upgrade']
0m10.1s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'sh', '-c', 'apt-cache dumpavail | md5sum']
0m10.5s DUMP:
4422799932b3309b6f5de1972870b61f -
0m10.5s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'sh', '-c', 'apt-cache dumpavail | md5sum']
0m10.5s INFO: Running scripts post_setup
0m10.5s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_dummy_users']
0m11.7s DUMP:
useradd warning: dummy1000's uid 1000 is greater than SYS_UID_MAX 999
useradd warning: dummy1001's uid 1001 is greater than SYS_UID_MAX 999
useradd warning: dummy1002's uid 1002 is greater than SYS_UID_MAX 999
useradd warning: dummy1003's uid 1003 is greater than SYS_UID_MAX 999
useradd warning: dummy1004's uid 1004 is greater than SYS_UID_MAX 999
useradd warning: dummy1005's uid 1005 is greater than SYS_UID_MAX 999
useradd warning: dummy1006's uid 1006 is greater than SYS_UID_MAX 999
useradd warning: dummy1007's uid 1007 is greater than SYS_UID_MAX 999
useradd warning: dummy1008's uid 1008 is greater than SYS_UID_MAX 999
useradd warning: dummy1009's uid 1009 is greater than SYS_UID_MAX 999
useradd warning: dummy1010's uid 1010 is greater than SYS_UID_MAX 999
0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_dummy_users']
0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_forbid_home']
0m11.7s DUMP:
Disabling /home
Adding 'local diversion of /home to /home.distrib'
0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_forbid_home']
0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_force-unsafe-io']
0m11.7s DUMP:
Enabling dpkg --force-unsafe-io.
Adding 'local diversion of /bin/sync to /bin/sync.distrib'
dpkg-divert: warning: diverting file '/bin/sync' from an Essential package with rename is dangerous, use --no-rename
'/bin/sync' -> 'true'
0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_force-unsafe-io']
0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_minimize']
0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_minimize']
0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_squeeze-backports']
0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_squeeze-backports']
0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_zz_backports']
0m11.7s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_setup_zz_backports']
0m11.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', 'clean']
0m11.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', 'clean']
0m11.8s DEBUG: Recording chroot state
0m12.2s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n']
0m12.3s DUMP:
install ok installed apt apt 2.7.13+b1
install ok installed base-files base-files 13
install ok installed base-passwd base-passwd 3.6.3
install ok installed bash bash 5.2.21-2
install ok installed bsdutils bsdutils 1:2.39.3-6.1
install ok installed coreutils coreutils 9.4-3+b1
install ok installed dash dash 0.5.12-6
install ok installed debconf debconf 1.5.86
install ok installed debian-archive-keyring debian-archive-keyring 2023.4
install ok installed debianutils debianutils 5.16
install ok installed diffutils diffutils 1:3.10-1
install ok installed dpkg dpkg 1.22.5
install ok installed e2fsprogs e2fsprogs 1.47.0-2.3
install ok installed findutils findutils 4.9.0-5
install ok installed gcc-14-base:amd64 gcc-14-base 14-20240221-2.1
install ok installed gpgv gpgv 2.2.40-1.1+b1
install ok installed grep grep 3.11-4
install ok installed gzip gzip 1.12-1
install ok installed hostname hostname 3.23+nmu2
install ok installed init-system-helpers init-system-helpers 1.66
install ok installed libacl1:amd64 libacl1 2.3.2-1
install ok installed libapt-pkg6.0t64:amd64 libapt-pkg6.0t64 2.7.13+b1
install ok installed libattr1:amd64 libattr1 1:2.5.2-1
install ok installed libaudit-common libaudit-common 1:3.1.2-2.1
install ok installed libaudit1:amd64 libaudit1 1:3.1.2-2.1
install ok installed libblkid1:amd64 libblkid1 2.39.3-6.1
install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-5+b2
install ok installed libc-bin libc-bin 2.37-15.1
install ok installed libc6:amd64 libc6 2.37-15.1
install ok installed libcap-ng0:amd64 libcap-ng0 0.8.4-2
install ok installed libcap2:amd64 libcap2 1:2.66-5
install ok installed libcom-err2t64:amd64 libcom-err2t64 1.47.0-2.3
install ok installed libcrypt1:amd64 libcrypt1 1:4.4.36-4
install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-5
install ok installed libdebconfclient0:amd64 libdebconfclient0 0.271+b1
install ok installed libext2fs2t64:amd64 libext2fs2t64 1.47.0-2.3
install ok installed libffi8:amd64 libffi8 3.4.6-1
install ok installed libgcc-s1:amd64 libgcc-s1 14-20240221-2.1
install ok installed libgcrypt20:amd64 libgcrypt20 1.10.3-2
install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-2+b1
install ok installed libgnutls30t64:amd64 libgnutls30t64 3.8.3-1.1
install ok installed libgpg-error0:amd64 libgpg-error0 1.47-3
install ok installed libhogweed6:amd64 libhogweed6 3.9.1-2+b1
install ok installed libidn2-0:amd64 libidn2-0 2.3.7-2
install ok installed liblz4-1:amd64 liblz4-1 1.9.4-1+b2
install ok installed liblzma5:amd64 liblzma5 5.6.0-0.2
install ok installed libmd0:amd64 libmd0 1.1.0-2
install ok installed libmount1:amd64 libmount1 2.39.3-6.1
install ok installed libnettle8:amd64 libnettle8 3.9.1-2+b1
install ok installed libp11-kit0:amd64 libp11-kit0 0.25.3-4
install ok installed libpam-modules:amd64 libpam-modules 1.5.3-6
install ok installed libpam-modules-bin libpam-modules-bin 1.5.3-6
install ok installed libpam-runtime libpam-runtime 1.5.3-6
install ok installed libpam0t64:amd64 libpam0t64 1.5.3-4
install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.42-4+b1
install ok installed libseccomp2:amd64 libseccomp2 2.5.5-1
install ok installed libselinux1:amd64 libselinux1 3.5-2
install ok installed libsemanage-common libsemanage-common 3.5-1
install ok installed libsemanage2:amd64 libsemanage2 3.5-1+b2
install ok installed libsepol2:amd64 libsepol2 3.5-2
install ok installed libsmartcols1:amd64 libsmartcols1 2.39.3-6.1
install ok installed libss2t64:amd64 libss2t64 1.47.0-2.3
install ok installed libssl3:amd64 libssl3 3.1.5-1
install ok installed libstdc++6:amd64 libstdc++6 14-20240221-2.1
install ok installed libsystemd0:amd64 libsystemd0 255.4-1
install ok installed libtasn1-6:amd64 libtasn1-6 4.19.0-3+b2
install ok installed libtinfo6:amd64 libtinfo6 6.4+20240113-1
install ok installed libudev1:amd64 libudev1 255.4-1
install ok installed libunistring5:amd64 libunistring5 1.1-2
install ok installed libuuid1t64:amd64 libuuid1t64 2.39.3-6.1
install ok installed libxxhash0:amd64 libxxhash0 0.8.2-2+b1
install ok installed libzstd1:amd64 libzstd1 1.5.5+dfsg2-2
install ok installed login login 1:4.13+dfsg1-4
install ok installed logsave logsave 1.47.0-2.3
install ok installed mawk mawk 1.3.4.20240123-1
install ok installed mount mount 2.39.3-6.1
install ok installed ncurses-base ncurses-base 6.4+20240113-1
install ok installed ncurses-bin ncurses-bin 6.4+20240113-1
install ok installed passwd passwd 1:4.13+dfsg1-4
install ok installed perl-base perl-base 5.38.2-3
install ok installed sed sed 4.9-2
install ok installed sysvinit-utils sysvinit-utils 3.08-7
install ok installed tar tar 1.35+dfsg-3
install ok installed tzdata tzdata 2024a-1
install ok installed usr-is-merged usr-is-merged 39
install ok installed util-linux util-linux 2.39.3-6.1
install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg-3+b1
0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n']
0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'dpkg-divert', '--list']
0m12.3s DUMP:
diversion of /lib/x86_64-linux-gnu/libpam.so.0 to /lib/x86_64-linux-gnu/libpam.so.0.usr-is-merged by libpam0t64
diversion of /lib/x86_64-linux-gnu/libpamc.so.0 to /lib/x86_64-linux-gnu/libpamc.so.0.usr-is-merged by libpam0t64
diversion of /lib/x86_64-linux-gnu/libpam.so.0.85.1 to /lib/x86_64-linux-gnu/libpam.so.0.85.1.usr-is-merged by libpam0t64
local diversion of /bin/sync to /bin/sync.distrib
local diversion of /home to /home.distrib
diversion of /lib/x86_64-linux-gnu/libpam_misc.so.0 to /lib/x86_64-linux-gnu/libpam_misc.so.0.usr-is-merged by libpam0t64
diversion of /lib/x86_64-linux-gnu/libpam_misc.so.0.82.1 to /lib/x86_64-linux-gnu/libpam_misc.so.0.82.1.usr-is-merged by libpam0t64
diversion of /lib/x86_64-linux-gnu/libpamc.so.0.82.1 to /lib/x86_64-linux-gnu/libpamc.so.0.82.1.usr-is-merged by libpam0t64
0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'dpkg-divert', '--list']
0m12.3s INFO: Running scripts is_testable
0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/is_testable_uninstallable']
0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/is_testable_uninstallable']
0m12.3s INFO: apt-cache does not know about any of the requested packages
0m12.3s INFO: Running scripts pre_test
0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_test_exceptions']
0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_test_exceptions']
0m12.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_test_root_password']
0m12.3s DUMP:
New password: Retype new password: passwd: password updated successfully
0m12.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_test_root_password']
0m12.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m12.6s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m13.0s DEBUG: No broken symlinks as far as we can find.
0m13.0s INFO: Running scripts pre_install
0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_database-server']
0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_database-server']
0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_exceptions']
0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_exceptions']
0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_extras']
0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_extras']
0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_foreign_architecture']
0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_foreign_architecture']
0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_foreign_architecture_i386']
0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_foreign_architecture_i386']
0m13.0s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_log_alternatives']
0m13.0s DUMP:
Adding 'local diversion of /usr/bin/update-alternatives to /usr/bin/update-alternatives.orig'
dpkg-divert: warning: diverting file '/usr/bin/update-alternatives' from an Essential package with rename is dangerous, use --no-rename
0m13.0s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_install_log_alternatives']
0m13.0s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m13.3s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m13.7s DEBUG: No broken symlinks as far as we can find.
0m13.7s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-cache', 'policy']
0m14.9s DUMP:
Package files:
100 /var/lib/dpkg/status
release a=now
500 http://deb.debian.org/debian sid/main amd64 Packages
release o=Debian,a=unstable,n=sid,l=Debian,c=main,b=amd64
origin deb.debian.org
Pinned packages:
0m14.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-cache', 'policy']
0m14.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-cache', 'policy', 'python3-scrapy']
0m14.9s DUMP:
python3-scrapy:
Installed: (none)
Candidate: 2.11.1-1
Version table:
2.11.1-1 500
500 http://deb.debian.org/debian sid/main amd64 Packages
0m14.9s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-cache', 'policy', 'python3-scrapy']
0m14.9s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', '-y', 'install', 'python3-scrapy=2.11.1-1']
0m39.3s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following additional packages will be installed:
ca-certificates libexpat1 libgssapi-krb5-2 libicu72 libk5crypto3
libkeyutils1 libkrb5-3 libkrb5support0 libncursesw6 libnsl2
libpython3-stdlib libpython3.11-minimal libpython3.11-stdlib libreadline8
libsqlite3-0 libssl3t64 libtirpc-common libtirpc3 libxml2 libxslt1.1
media-types netbase openssl python3 python3-attr python3-automat
python3-bcrypt python3-certifi python3-cffi-backend python3-chardet
python3-charset-normalizer python3-constantly python3-cryptography
python3-cssselect python3-filelock python3-hamcrest python3-hyperlink
python3-idna python3-incremental python3-itemadapter python3-itemloaders
python3-jmespath python3-lxml python3-minimal python3-openssl
python3-packaging python3-parsel python3-pkg-resources python3-protego
python3-pyasn1 python3-pyasn1-modules python3-pydispatch python3-queuelib
python3-requests python3-requests-file python3-service-identity python3-six
python3-tldextract python3-twisted python3-urllib3 python3-w3lib
python3-zope.interface python3.11 python3.11-minimal readline-common
Suggested packages:
krb5-doc krb5-user python3-doc python3-tk python3-venv python-attr-doc
python-charset-normalizer-doc python-cryptography-doc
python3-cryptography-vectors python-lxml-doc python-openssl-doc
python3-openssl-dbg python3-setuptools python-pydispatch-doc python3-socks
python-requests-doc python3-boto3 python3-botocore python-scrapy-doc
python3-pampy python3-serial python3-wxgtk4.0 python3-brotli python3.11-venv
python3.11-doc binutils binfmt-support readline-doc
Recommended packages:
krb5-locales libgpm2 python3-click python3-bs4 python3-html5lib ipython3
python3-brotli python3-pil publicsuffix
The following packages will be REMOVED:
libssl3
The following NEW packages will be installed:
ca-certificates libexpat1 libgssapi-krb5-2 libicu72 libk5crypto3
libkeyutils1 libkrb5-3 libkrb5support0 libncursesw6 libnsl2
libpython3-stdlib libpython3.11-minimal libpython3.11-stdlib libreadline8
libsqlite3-0 libssl3t64 libtirpc-common libtirpc3 libxml2 libxslt1.1
media-types netbase openssl python3 python3-attr python3-automat
python3-bcrypt python3-certifi python3-cffi-backend python3-chardet
python3-charset-normalizer python3-constantly python3-cryptography
python3-cssselect python3-filelock python3-hamcrest python3-hyperlink
python3-idna python3-incremental python3-itemadapter python3-itemloaders
python3-jmespath python3-lxml python3-minimal python3-openssl
python3-packaging python3-parsel python3-pkg-resources python3-protego
python3-pyasn1 python3-pyasn1-modules python3-pydispatch python3-queuelib
python3-requests python3-requests-file python3-scrapy
python3-service-identity python3-six python3-tldextract python3-twisted
python3-urllib3 python3-w3lib python3-zope.interface python3.11
python3.11-minimal readline-common
0 upgraded, 66 newly installed, 1 to remove and 0 not upgraded.
Need to get 28.2 MB of archives.
After this operation, 105 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian sid/main amd64 libssl3t64 amd64 3.1.5-1.1 [2058 kB]
Get:2 http://deb.debian.org/debian sid/main amd64 libpython3.11-minimal amd64 3.11.8-2 [817 kB]
Get:3 http://deb.debian.org/debian sid/main amd64 libexpat1 amd64 2.6.0-1 [101 kB]
Get:4 http://deb.debian.org/debian sid/main amd64 python3.11-minimal amd64 3.11.8-2 [2037 kB]
Get:5 http://deb.debian.org/debian sid/main amd64 python3-minimal amd64 3.11.6-1 [26.2 kB]
Get:6 http://deb.debian.org/debian sid/main amd64 media-types all 10.1.0 [26.9 kB]
Get:7 http://deb.debian.org/debian sid/main amd64 netbase all 6.4 [12.8 kB]
Get:8 http://deb.debian.org/debian sid/main amd64 libncursesw6 amd64 6.4+20240113-1 [135 kB]
Get:9 http://deb.debian.org/debian sid/main amd64 libkrb5support0 amd64 1.20.1-5+b1 [33.2 kB]
Get:10 http://deb.debian.org/debian sid/main amd64 libk5crypto3 amd64 1.20.1-5+b1 [80.0 kB]
Get:11 http://deb.debian.org/debian sid/main amd64 libkeyutils1 amd64 1.6.3-3 [8952 B]
Get:12 http://deb.debian.org/debian sid/main amd64 libkrb5-3 amd64 1.20.1-5+b1 [333 kB]
Get:13 http://deb.debian.org/debian sid/main amd64 libgssapi-krb5-2 amd64 1.20.1-5+b1 [135 kB]
Get:14 http://deb.debian.org/debian sid/main amd64 libtirpc-common all 1.3.4+ds-1.1 [10.8 kB]
Get:15 http://deb.debian.org/debian sid/main amd64 libtirpc3 amd64 1.3.4+ds-1 [82.1 kB]
Get:16 http://deb.debian.org/debian sid/main amd64 libnsl2 amd64 1.3.0-3 [40.0 kB]
Get:17 http://deb.debian.org/debian sid/main amd64 readline-common all 8.2-3.1 [69.2 kB]
Get:18 http://deb.debian.org/debian sid/main amd64 libreadline8 amd64 8.2-3+b1 [167 kB]
Get:19 http://deb.debian.org/debian sid/main amd64 libsqlite3-0 amd64 3.45.1-1 [894 kB]
Get:20 http://deb.debian.org/debian sid/main amd64 libpython3.11-stdlib amd64 3.11.8-2 [1827 kB]
Get:21 http://deb.debian.org/debian sid/main amd64 python3.11 amd64 3.11.8-2 [597 kB]
Get:22 http://deb.debian.org/debian sid/main amd64 libpython3-stdlib amd64 3.11.6-1 [9224 B]
Get:23 http://deb.debian.org/debian sid/main amd64 python3 amd64 3.11.6-1 [26.2 kB]
Get:24 http://deb.debian.org/debian sid/main amd64 openssl amd64 3.1.5-1.1 [1241 kB]
Get:25 http://deb.debian.org/debian sid/main amd64 ca-certificates all 20240203 [158 kB]
Get:26 http://deb.debian.org/debian sid/main amd64 libicu72 amd64 72.1-4+b1 [9395 kB]
Get:27 http://deb.debian.org/debian sid/main amd64 libxml2 amd64 2.9.14+dfsg-1.3+b2 [692 kB]
Get:28 http://deb.debian.org/debian sid/main amd64 libxslt1.1 amd64 1.1.35-1 [242 kB]
Get:29 http://deb.debian.org/debian sid/main amd64 python3-attr all 23.2.0-2 [65.5 kB]
Get:30 http://deb.debian.org/debian sid/main amd64 python3-automat all 22.10.0-2 [23.3 kB]
Get:31 http://deb.debian.org/debian sid/main amd64 python3-cffi-backend amd64 1.16.0-2+b1 [112 kB]
Get:32 http://deb.debian.org/debian sid/main amd64 python3-bcrypt amd64 3.2.2-1 [32.2 kB]
Get:33 http://deb.debian.org/debian sid/main amd64 python3-certifi all 2023.11.17-1 [155 kB]
Get:34 http://deb.debian.org/debian sid/main amd64 python3-pkg-resources all 68.1.2-2 [241 kB]
Get:35 http://deb.debian.org/debian sid/main amd64 python3-chardet all 5.2.0+dfsg-1 [107 kB]
Get:36 http://deb.debian.org/debian sid/main amd64 python3-charset-normalizer all 3.3.2-1 [51.6 kB]
Get:37 http://deb.debian.org/debian sid/main amd64 python3-constantly all 23.10.4-1 [13.5 kB]
Get:38 http://deb.debian.org/debian sid/main amd64 python3-cryptography amd64 41.0.7-4 [758 kB]
Get:39 http://deb.debian.org/debian sid/main amd64 python3-cssselect all 1.2.0-2 [21.6 kB]
Get:40 http://deb.debian.org/debian sid/main amd64 python3-filelock all 3.13.1-1 [10.5 kB]
Get:41 http://deb.debian.org/debian sid/main amd64 python3-hamcrest all 2.1.0-1 [31.3 kB]
Get:42 http://deb.debian.org/debian sid/main amd64 python3-idna all 3.6-2 [37.0 kB]
Get:43 http://deb.debian.org/debian sid/main amd64 python3-hyperlink all 21.0.0-5 [70.1 kB]
Get:44 http://deb.debian.org/debian sid/main amd64 python3-incremental all 22.10.0-1 [15.0 kB]
Get:45 http://deb.debian.org/debian sid/main amd64 python3-itemadapter all 0.8.0-1 [12.2 kB]
Get:46 http://deb.debian.org/debian sid/main amd64 python3-jmespath all 1.0.1-1 [21.1 kB]
Get:47 http://deb.debian.org/debian sid/main amd64 python3-lxml amd64 5.1.0-1 [2092 kB]
Get:48 http://deb.debian.org/debian sid/main amd64 python3-packaging all 23.2-1 [44.8 kB]
Get:49 http://deb.debian.org/debian sid/main amd64 python3-w3lib all 2.1.2-1.1 [19.9 kB]
Get:50 http://deb.debian.org/debian sid/main amd64 python3-parsel all 1.8.1+dfsg-1 [19.3 kB]
Get:51 http://deb.debian.org/debian sid/main amd64 python3-itemloaders all 1.1.0-1 [11.4 kB]
Get:52 http://deb.debian.org/debian sid/main amd64 python3-openssl all 24.0.0-2 [52.6 kB]
Get:53 http://deb.debian.org/debian sid/main amd64 python3-protego all 0.3.0+dfsg-1 [10.9 kB]
Get:54 http://deb.debian.org/debian sid/main amd64 python3-pyasn1 all 0.4.8-4 [62.3 kB]
Get:55 http://deb.debian.org/debian sid/main amd64 python3-pyasn1-modules all 0.2.8-1 [72.0 kB]
Get:56 http://deb.debian.org/debian sid/main amd64 python3-pydispatch all 2.0.5-5 [11.9 kB]
Get:57 http://deb.debian.org/debian sid/main amd64 python3-queuelib all 1.6.2-2 [13.7 kB]
Get:58 http://deb.debian.org/debian sid/main amd64 python3-six all 1.16.0-4 [17.5 kB]
Get:59 http://deb.debian.org/debian sid/main amd64 python3-urllib3 all 1.26.18-2 [116 kB]
Get:60 http://deb.debian.org/debian sid/main amd64 python3-requests all 2.31.0+dfsg-1 [68.6 kB]
Get:61 http://deb.debian.org/debian sid/main amd64 python3-requests-file all 1.5.1-2 [5732 B]
Get:62 http://deb.debian.org/debian sid/main amd64 python3-service-identity all 24.1.0-1 [13.9 kB]
Get:63 http://deb.debian.org/debian sid/main amd64 python3-tldextract all 3.1.2-2 [78.1 kB]
Get:64 http://deb.debian.org/debian sid/main amd64 python3-zope.interface amd64 6.1-1 [152 kB]
Get:65 http://deb.debian.org/debian sid/main amd64 python3-twisted all 23.10.0-2 [2030 kB]
Get:66 http://deb.debian.org/debian sid/main amd64 python3-scrapy all 2.11.1-1 [259 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 28.2 MB in 1s (25.9 MB/s)
dpkg: libssl3:amd64: dependency problems, but removing anyway as you requested:
coreutils depends on libssl3 (>= 3.0.0).
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5235 files and directories currently installed.)
Removing libssl3:amd64 (3.1.5-1) ...
Selecting previously unselected package libssl3t64:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5222 files and directories currently installed.)
Preparing to unpack .../libssl3t64_3.1.5-1.1_amd64.deb ...
Unpacking libssl3t64:amd64 (3.1.5-1.1) ...
Setting up libssl3t64:amd64 (3.1.5-1.1) ...
Selecting previously unselected package libpython3.11-minimal:amd64.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5237 files and directories currently installed.)
Preparing to unpack .../libpython3.11-minimal_3.11.8-2_amd64.deb ...
Unpacking libpython3.11-minimal:amd64 (3.11.8-2) ...
Selecting previously unselected package libexpat1:amd64.
Preparing to unpack .../libexpat1_2.6.0-1_amd64.deb ...
Unpacking libexpat1:amd64 (2.6.0-1) ...
Selecting previously unselected package python3.11-minimal.
Preparing to unpack .../python3.11-minimal_3.11.8-2_amd64.deb ...
Unpacking python3.11-minimal (3.11.8-2) ...
Setting up libpython3.11-minimal:amd64 (3.11.8-2) ...
Setting up libexpat1:amd64 (2.6.0-1) ...
Setting up python3.11-minimal (3.11.8-2) ...
Selecting previously unselected package python3-minimal.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 5553 files and directories currently installed.)
Preparing to unpack .../00-python3-minimal_3.11.6-1_amd64.deb ...
Unpacking python3-minimal (3.11.6-1) ...
Selecting previously unselected package media-types.
Preparing to unpack .../01-media-types_10.1.0_all.deb ...
Unpacking media-types (10.1.0) ...
Selecting previously unselected package netbase.
Preparing to unpack .../02-netbase_6.4_all.deb ...
Unpacking netbase (6.4) ...
Selecting previously unselected package libncursesw6:amd64.
Preparing to unpack .../03-libncursesw6_6.4+20240113-1_amd64.deb ...
Unpacking libncursesw6:amd64 (6.4+20240113-1) ...
Selecting previously unselected package libkrb5support0:amd64.
Preparing to unpack .../04-libkrb5support0_1.20.1-5+b1_amd64.deb ...
Unpacking libkrb5support0:amd64 (1.20.1-5+b1) ...
Selecting previously unselected package libk5crypto3:amd64.
Preparing to unpack .../05-libk5crypto3_1.20.1-5+b1_amd64.deb ...
Unpacking libk5crypto3:amd64 (1.20.1-5+b1) ...
Selecting previously unselected package libkeyutils1:amd64.
Preparing to unpack .../06-libkeyutils1_1.6.3-3_amd64.deb ...
Unpacking libkeyutils1:amd64 (1.6.3-3) ...
Selecting previously unselected package libkrb5-3:amd64.
Preparing to unpack .../07-libkrb5-3_1.20.1-5+b1_amd64.deb ...
Unpacking libkrb5-3:amd64 (1.20.1-5+b1) ...
Selecting previously unselected package libgssapi-krb5-2:amd64.
Preparing to unpack .../08-libgssapi-krb5-2_1.20.1-5+b1_amd64.deb ...
Unpacking libgssapi-krb5-2:amd64 (1.20.1-5+b1) ...
Selecting previously unselected package libtirpc-common.
Preparing to unpack .../09-libtirpc-common_1.3.4+ds-1.1_all.deb ...
Unpacking libtirpc-common (1.3.4+ds-1.1) ...
Selecting previously unselected package libtirpc3:amd64.
Preparing to unpack .../10-libtirpc3_1.3.4+ds-1_amd64.deb ...
Unpacking libtirpc3:amd64 (1.3.4+ds-1) ...
Selecting previously unselected package libnsl2:amd64.
Preparing to unpack .../11-libnsl2_1.3.0-3_amd64.deb ...
Unpacking libnsl2:amd64 (1.3.0-3) ...
Selecting previously unselected package readline-common.
Preparing to unpack .../12-readline-common_8.2-3.1_all.deb ...
Unpacking readline-common (8.2-3.1) ...
Selecting previously unselected package libreadline8:amd64.
Preparing to unpack .../13-libreadline8_8.2-3+b1_amd64.deb ...
Unpacking libreadline8:amd64 (8.2-3+b1) ...
Selecting previously unselected package libsqlite3-0:amd64.
Preparing to unpack .../14-libsqlite3-0_3.45.1-1_amd64.deb ...
Unpacking libsqlite3-0:amd64 (3.45.1-1) ...
Selecting previously unselected package libpython3.11-stdlib:amd64.
Preparing to unpack .../15-libpython3.11-stdlib_3.11.8-2_amd64.deb ...
Unpacking libpython3.11-stdlib:amd64 (3.11.8-2) ...
Selecting previously unselected package python3.11.
Preparing to unpack .../16-python3.11_3.11.8-2_amd64.deb ...
Unpacking python3.11 (3.11.8-2) ...
Selecting previously unselected package libpython3-stdlib:amd64.
Preparing to unpack .../17-libpython3-stdlib_3.11.6-1_amd64.deb ...
Unpacking libpython3-stdlib:amd64 (3.11.6-1) ...
Setting up python3-minimal (3.11.6-1) ...
Selecting previously unselected package python3.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 6091 files and directories currently installed.)
Preparing to unpack .../00-python3_3.11.6-1_amd64.deb ...
Unpacking python3 (3.11.6-1) ...
Selecting previously unselected package openssl.
Preparing to unpack .../01-openssl_3.1.5-1.1_amd64.deb ...
Unpacking openssl (3.1.5-1.1) ...
Selecting previously unselected package ca-certificates.
Preparing to unpack .../02-ca-certificates_20240203_all.deb ...
Unpacking ca-certificates (20240203) ...
Selecting previously unselected package libicu72:amd64.
Preparing to unpack .../03-libicu72_72.1-4+b1_amd64.deb ...
Unpacking libicu72:amd64 (72.1-4+b1) ...
Selecting previously unselected package libxml2:amd64.
Preparing to unpack .../04-libxml2_2.9.14+dfsg-1.3+b2_amd64.deb ...
Unpacking libxml2:amd64 (2.9.14+dfsg-1.3+b2) ...
Selecting previously unselected package libxslt1.1:amd64.
Preparing to unpack .../05-libxslt1.1_1.1.35-1_amd64.deb ...
Unpacking libxslt1.1:amd64 (1.1.35-1) ...
Selecting previously unselected package python3-attr.
Preparing to unpack .../06-python3-attr_23.2.0-2_all.deb ...
Unpacking python3-attr (23.2.0-2) ...
Selecting previously unselected package python3-automat.
Preparing to unpack .../07-python3-automat_22.10.0-2_all.deb ...
Unpacking python3-automat (22.10.0-2) ...
Selecting previously unselected package python3-cffi-backend:amd64.
Preparing to unpack .../08-python3-cffi-backend_1.16.0-2+b1_amd64.deb ...
Unpacking python3-cffi-backend:amd64 (1.16.0-2+b1) ...
Selecting previously unselected package python3-bcrypt.
Preparing to unpack .../09-python3-bcrypt_3.2.2-1_amd64.deb ...
Unpacking python3-bcrypt (3.2.2-1) ...
Selecting previously unselected package python3-certifi.
Preparing to unpack .../10-python3-certifi_2023.11.17-1_all.deb ...
Unpacking python3-certifi (2023.11.17-1) ...
Selecting previously unselected package python3-pkg-resources.
Preparing to unpack .../11-python3-pkg-resources_68.1.2-2_all.deb ...
Unpacking python3-pkg-resources (68.1.2-2) ...
Selecting previously unselected package python3-chardet.
Preparing to unpack .../12-python3-chardet_5.2.0+dfsg-1_all.deb ...
Unpacking python3-chardet (5.2.0+dfsg-1) ...
Selecting previously unselected package python3-charset-normalizer.
Preparing to unpack .../13-python3-charset-normalizer_3.3.2-1_all.deb ...
Unpacking python3-charset-normalizer (3.3.2-1) ...
Selecting previously unselected package python3-constantly.
Preparing to unpack .../14-python3-constantly_23.10.4-1_all.deb ...
Unpacking python3-constantly (23.10.4-1) ...
Selecting previously unselected package python3-cryptography.
Preparing to unpack .../15-python3-cryptography_41.0.7-4_amd64.deb ...
Unpacking python3-cryptography (41.0.7-4) ...
Selecting previously unselected package python3-cssselect.
Preparing to unpack .../16-python3-cssselect_1.2.0-2_all.deb ...
Unpacking python3-cssselect (1.2.0-2) ...
Selecting previously unselected package python3-filelock.
Preparing to unpack .../17-python3-filelock_3.13.1-1_all.deb ...
Unpacking python3-filelock (3.13.1-1) ...
Selecting previously unselected package python3-hamcrest.
Preparing to unpack .../18-python3-hamcrest_2.1.0-1_all.deb ...
Unpacking python3-hamcrest (2.1.0-1) ...
Selecting previously unselected package python3-idna.
Preparing to unpack .../19-python3-idna_3.6-2_all.deb ...
Unpacking python3-idna (3.6-2) ...
Selecting previously unselected package python3-hyperlink.
Preparing to unpack .../20-python3-hyperlink_21.0.0-5_all.deb ...
Unpacking python3-hyperlink (21.0.0-5) ...
Selecting previously unselected package python3-incremental.
Preparing to unpack .../21-python3-incremental_22.10.0-1_all.deb ...
Unpacking python3-incremental (22.10.0-1) ...
Selecting previously unselected package python3-itemadapter.
Preparing to unpack .../22-python3-itemadapter_0.8.0-1_all.deb ...
Unpacking python3-itemadapter (0.8.0-1) ...
Selecting previously unselected package python3-jmespath.
Preparing to unpack .../23-python3-jmespath_1.0.1-1_all.deb ...
Unpacking python3-jmespath (1.0.1-1) ...
Selecting previously unselected package python3-lxml:amd64.
Preparing to unpack .../24-python3-lxml_5.1.0-1_amd64.deb ...
Unpacking python3-lxml:amd64 (5.1.0-1) ...
Selecting previously unselected package python3-packaging.
Preparing to unpack .../25-python3-packaging_23.2-1_all.deb ...
Unpacking python3-packaging (23.2-1) ...
Selecting previously unselected package python3-w3lib.
Preparing to unpack .../26-python3-w3lib_2.1.2-1.1_all.deb ...
Unpacking python3-w3lib (2.1.2-1.1) ...
Selecting previously unselected package python3-parsel.
Preparing to unpack .../27-python3-parsel_1.8.1+dfsg-1_all.deb ...
Unpacking python3-parsel (1.8.1+dfsg-1) ...
Selecting previously unselected package python3-itemloaders.
Preparing to unpack .../28-python3-itemloaders_1.1.0-1_all.deb ...
Unpacking python3-itemloaders (1.1.0-1) ...
Selecting previously unselected package python3-openssl.
Preparing to unpack .../29-python3-openssl_24.0.0-2_all.deb ...
Unpacking python3-openssl (24.0.0-2) ...
Selecting previously unselected package python3-protego.
Preparing to unpack .../30-python3-protego_0.3.0+dfsg-1_all.deb ...
Unpacking python3-protego (0.3.0+dfsg-1) ...
Selecting previously unselected package python3-pyasn1.
Preparing to unpack .../31-python3-pyasn1_0.4.8-4_all.deb ...
Unpacking python3-pyasn1 (0.4.8-4) ...
Selecting previously unselected package python3-pyasn1-modules.
Preparing to unpack .../32-python3-pyasn1-modules_0.2.8-1_all.deb ...
Unpacking python3-pyasn1-modules (0.2.8-1) ...
Selecting previously unselected package python3-pydispatch.
Preparing to unpack .../33-python3-pydispatch_2.0.5-5_all.deb ...
Unpacking python3-pydispatch (2.0.5-5) ...
Selecting previously unselected package python3-queuelib.
Preparing to unpack .../34-python3-queuelib_1.6.2-2_all.deb ...
Unpacking python3-queuelib (1.6.2-2) ...
Selecting previously unselected package python3-six.
Preparing to unpack .../35-python3-six_1.16.0-4_all.deb ...
Unpacking python3-six (1.16.0-4) ...
Selecting previously unselected package python3-urllib3.
Preparing to unpack .../36-python3-urllib3_1.26.18-2_all.deb ...
Unpacking python3-urllib3 (1.26.18-2) ...
Selecting previously unselected package python3-requests.
Preparing to unpack .../37-python3-requests_2.31.0+dfsg-1_all.deb ...
Unpacking python3-requests (2.31.0+dfsg-1) ...
Selecting previously unselected package python3-requests-file.
Preparing to unpack .../38-python3-requests-file_1.5.1-2_all.deb ...
Unpacking python3-requests-file (1.5.1-2) ...
Selecting previously unselected package python3-service-identity.
Preparing to unpack .../39-python3-service-identity_24.1.0-1_all.deb ...
Unpacking python3-service-identity (24.1.0-1) ...
Selecting previously unselected package python3-tldextract.
Preparing to unpack .../40-python3-tldextract_3.1.2-2_all.deb ...
Unpacking python3-tldextract (3.1.2-2) ...
Selecting previously unselected package python3-zope.interface.
Preparing to unpack .../41-python3-zope.interface_6.1-1_amd64.deb ...
Unpacking python3-zope.interface (6.1-1) ...
Selecting previously unselected package python3-twisted.
Preparing to unpack .../42-python3-twisted_23.10.0-2_all.deb ...
Unpacking python3-twisted (23.10.0-2) ...
Selecting previously unselected package python3-scrapy.
Preparing to unpack .../43-python3-scrapy_2.11.1-1_all.deb ...
Unpacking python3-scrapy (2.11.1-1) ...
Setting up media-types (10.1.0) ...
Setting up libkeyutils1:amd64 (1.6.3-3) ...
Setting up libicu72:amd64 (72.1-4+b1) ...
Setting up libtirpc-common (1.3.4+ds-1.1) ...
Setting up libsqlite3-0:amd64 (3.45.1-1) ...
Setting up libkrb5support0:amd64 (1.20.1-5+b1) ...
Setting up libncursesw6:amd64 (6.4+20240113-1) ...
Setting up libk5crypto3:amd64 (1.20.1-5+b1) ...
Setting up netbase (6.4) ...
Setting up libkrb5-3:amd64 (1.20.1-5+b1) ...
Setting up openssl (3.1.5-1.1) ...
Setting up readline-common (8.2-3.1) ...
Setting up libxml2:amd64 (2.9.14+dfsg-1.3+b2) ...
Setting up libreadline8:amd64 (8.2-3+b1) ...
Setting up ca-certificates (20240203) ...
Updating certificates in /etc/ssl/certs...
146 added, 0 removed; done.
Setting up libgssapi-krb5-2:amd64 (1.20.1-5+b1) ...
Setting up libxslt1.1:amd64 (1.1.35-1) ...
Setting up libtirpc3:amd64 (1.3.4+ds-1) ...
Setting up libnsl2:amd64 (1.3.0-3) ...
Setting up libpython3.11-stdlib:amd64 (3.11.8-2) ...
Setting up libpython3-stdlib:amd64 (3.11.6-1) ...
Setting up python3.11 (3.11.8-2) ...
Setting up python3 (3.11.6-1) ...
Setting up python3-six (1.16.0-4) ...
Setting up python3-packaging (23.2-1) ...
Setting up python3-certifi (2023.11.17-1) ...
Setting up python3-jmespath (1.0.1-1) ...
Setting up python3-incremental (22.10.0-1) ...
Setting up python3-pydispatch (2.0.5-5) ...
Setting up python3-idna (3.6-2) ...
Setting up python3-urllib3 (1.26.18-2) ...
Setting up python3-lxml:amd64 (5.1.0-1) ...
Setting up python3-pyasn1 (0.4.8-4) ...
Setting up python3-constantly (23.10.4-1) ...
Setting up python3-cssselect (1.2.0-2) ...
Setting up python3-cffi-backend:amd64 (1.16.0-2+b1) ...
Setting up python3-pkg-resources (68.1.2-2) ...
Setting up python3-attr (23.2.0-2) ...
Setting up python3-w3lib (2.1.2-1.1) ...
Setting up python3-filelock (3.13.1-1) ...
Setting up python3-protego (0.3.0+dfsg-1) ...
Setting up python3-zope.interface (6.1-1) ...
Setting up python3-charset-normalizer (3.3.2-1) ...
Setting up python3-bcrypt (3.2.2-1) ...
Setting up python3-automat (22.10.0-2) ...
Setting up python3-queuelib (1.6.2-2) ...
Setting up python3-itemadapter (0.8.0-1) ...
Setting up python3-hamcrest (2.1.0-1) ...
Setting up python3-chardet (5.2.0+dfsg-1) ...
Setting up python3-pyasn1-modules (0.2.8-1) ...
Setting up python3-cryptography (41.0.7-4) ...
Setting up python3-requests (2.31.0+dfsg-1) ...
Setting up python3-hyperlink (21.0.0-5) ...
Setting up python3-service-identity (24.1.0-1) ...
Setting up python3-parsel (1.8.1+dfsg-1) ...
Setting up python3-requests-file (1.5.1-2) ...
Setting up python3-tldextract (3.1.2-2) ...
Setting up python3-openssl (24.0.0-2) ...
Setting up python3-twisted (23.10.0-2) ...
Setting up python3-itemloaders (1.1.0-1) ...
Setting up python3-scrapy (2.11.1-1) ...
Processing triggers for libc-bin (2.37-15.1) ...
Processing triggers for ca-certificates (20240203) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
0m39.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', '-y', 'install', 'python3-scrapy=2.11.1-1']
0m39.3s INFO: Running scripts post_install
0m39.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_install_exceptions']
0m39.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_install_exceptions']
0m39.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_install_log_alternatives']
0m39.3s DUMP:
Removing 'local diversion of /usr/bin/update-alternatives to /usr/bin/update-alternatives.orig'
LOG-ALTERNATIVES: dpkg=python3: piuparts=python3-scrapy=2.11.1-1: /usr/bin/update-alternatives --auto /usr/bin/python3
0m39.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/post_install_log_alternatives']
0m39.3s DEBUG: Starting command: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m39.9s DEBUG: Command failed (status=1), but ignoring error: ['lsof', '-w', '+D', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m40.9s DEBUG: No broken symlinks as far as we can find.
0m40.9s INFO: /bin converted to /usr/bin by /usr merge
0m40.9s INFO: /lib converted to /usr/lib by /usr merge
0m40.9s INFO: /lib/x86_64-linux-gnu converted to /usr/lib/x86_64-linux-gnu by /usr merge
0m40.9s INFO: /lib64 converted to /usr/lib64 by /usr merge
0m40.9s INFO: /sbin converted to /usr/sbin by /usr merge
0m41.4s DEBUG: Starting command: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', '-ac', '--ignore-obsolete']
0m42.6s DEBUG: Command ok: ['debsums', '--root', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', '-ac', '--ignore-obsolete']
0m42.6s DEBUG: Starting command: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate']
0m42.6s DUMP:
0.15.6
0m42.6s DEBUG: Command ok: ['dpkg-query', '-f', '${Version}\n', '-W', 'adequate']
0m42.6s INFO: Running adequate version 0.15.6 now.
0m42.6s DEBUG: Starting command: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'python3-scrapy']
0m42.8s DEBUG: Command ok: ['adequate', '--root', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'python3-scrapy']
0m42.8s INFO: Running scripts pre_remove
0m42.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_40_find_missing_md5sums']
0m42.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_40_find_missing_md5sums']
0m42.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles']
0m42.8s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_40_find_obsolete_conffiles']
0m42.8s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_40_find_unowned_lib_links']
0m44.3s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_40_find_unowned_lib_links']
0m44.3s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_50_find_bad_permissions']
0m44.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_50_find_bad_permissions']
0m44.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_50_find_missing_copyright']
0m44.4s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_50_find_missing_copyright']
0m44.4s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_exceptions']
0m44.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'tmp/scripts/pre_remove_exceptions']
0m44.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n']
0m44.6s DUMP:
install ok installed apt apt 2.7.13+b1
install ok installed base-files base-files 13
install ok installed base-passwd base-passwd 3.6.3
install ok installed bash bash 5.2.21-2
install ok installed bsdutils bsdutils 1:2.39.3-6.1
install ok installed ca-certificates ca-certificates 20240203
install ok installed coreutils coreutils 9.4-3+b1
install ok installed dash dash 0.5.12-6
install ok installed debconf debconf 1.5.86
install ok installed debian-archive-keyring debian-archive-keyring 2023.4
install ok installed debianutils debianutils 5.16
install ok installed diffutils diffutils 1:3.10-1
install ok installed dpkg dpkg 1.22.5
install ok installed e2fsprogs e2fsprogs 1.47.0-2.3
install ok installed findutils findutils 4.9.0-5
install ok installed gcc-14-base:amd64 gcc-14-base 14-20240221-2.1
install ok installed gpgv gpgv 2.2.40-1.1+b1
install ok installed grep grep 3.11-4
install ok installed gzip gzip 1.12-1
install ok installed hostname hostname 3.23+nmu2
install ok installed init-system-helpers init-system-helpers 1.66
install ok installed libacl1:amd64 libacl1 2.3.2-1
install ok installed libapt-pkg6.0t64:amd64 libapt-pkg6.0t64 2.7.13+b1
install ok installed libattr1:amd64 libattr1 1:2.5.2-1
install ok installed libaudit-common libaudit-common 1:3.1.2-2.1
install ok installed libaudit1:amd64 libaudit1 1:3.1.2-2.1
install ok installed libblkid1:amd64 libblkid1 2.39.3-6.1
install ok installed libbz2-1.0:amd64 libbz2-1.0 1.0.8-5+b2
install ok installed libc-bin libc-bin 2.37-15.1
install ok installed libc6:amd64 libc6 2.37-15.1
install ok installed libcap-ng0:amd64 libcap-ng0 0.8.4-2
install ok installed libcap2:amd64 libcap2 1:2.66-5
install ok installed libcom-err2t64:amd64 libcom-err2t64 1.47.0-2.3
install ok installed libcrypt1:amd64 libcrypt1 1:4.4.36-4
install ok installed libdb5.3t64:amd64 libdb5.3t64 5.3.28+dfsg2-5
install ok installed libdebconfclient0:amd64 libdebconfclient0 0.271+b1
install ok installed libexpat1:amd64 libexpat1 2.6.0-1
install ok installed libext2fs2t64:amd64 libext2fs2t64 1.47.0-2.3
install ok installed libffi8:amd64 libffi8 3.4.6-1
install ok installed libgcc-s1:amd64 libgcc-s1 14-20240221-2.1
install ok installed libgcrypt20:amd64 libgcrypt20 1.10.3-2
install ok installed libgmp10:amd64 libgmp10 2:6.3.0+dfsg-2+b1
install ok installed libgnutls30t64:amd64 libgnutls30t64 3.8.3-1.1
install ok installed libgpg-error0:amd64 libgpg-error0 1.47-3
install ok installed libgssapi-krb5-2:amd64 libgssapi-krb5-2 1.20.1-5+b1
install ok installed libhogweed6:amd64 libhogweed6 3.9.1-2+b1
install ok installed libicu72:amd64 libicu72 72.1-4+b1
install ok installed libidn2-0:amd64 libidn2-0 2.3.7-2
install ok installed libk5crypto3:amd64 libk5crypto3 1.20.1-5+b1
install ok installed libkeyutils1:amd64 libkeyutils1 1.6.3-3
install ok installed libkrb5-3:amd64 libkrb5-3 1.20.1-5+b1
install ok installed libkrb5support0:amd64 libkrb5support0 1.20.1-5+b1
install ok installed liblz4-1:amd64 liblz4-1 1.9.4-1+b2
install ok installed liblzma5:amd64 liblzma5 5.6.0-0.2
install ok installed libmd0:amd64 libmd0 1.1.0-2
install ok installed libmount1:amd64 libmount1 2.39.3-6.1
install ok installed libncursesw6:amd64 libncursesw6 6.4+20240113-1
install ok installed libnettle8:amd64 libnettle8 3.9.1-2+b1
install ok installed libnsl2:amd64 libnsl2 1.3.0-3
install ok installed libp11-kit0:amd64 libp11-kit0 0.25.3-4
install ok installed libpam-modules:amd64 libpam-modules 1.5.3-6
install ok installed libpam-modules-bin libpam-modules-bin 1.5.3-6
install ok installed libpam-runtime libpam-runtime 1.5.3-6
install ok installed libpam0t64:amd64 libpam0t64 1.5.3-4
install ok installed libpcre2-8-0:amd64 libpcre2-8-0 10.42-4+b1
install ok installed libpython3-stdlib:amd64 libpython3-stdlib 3.11.6-1
install ok installed libpython3.11-minimal:amd64 libpython3.11-minimal 3.11.8-2
install ok installed libpython3.11-stdlib:amd64 libpython3.11-stdlib 3.11.8-2
install ok installed libreadline8:amd64 libreadline8 8.2-3+b1
install ok installed libseccomp2:amd64 libseccomp2 2.5.5-1
install ok installed libselinux1:amd64 libselinux1 3.5-2
install ok installed libsemanage-common libsemanage-common 3.5-1
install ok installed libsemanage2:amd64 libsemanage2 3.5-1+b2
install ok installed libsepol2:amd64 libsepol2 3.5-2
install ok installed libsmartcols1:amd64 libsmartcols1 2.39.3-6.1
install ok installed libsqlite3-0:amd64 libsqlite3-0 3.45.1-1
install ok installed libss2t64:amd64 libss2t64 1.47.0-2.3
install ok installed libssl3t64:amd64 libssl3t64 3.1.5-1.1
install ok installed libstdc++6:amd64 libstdc++6 14-20240221-2.1
install ok installed libsystemd0:amd64 libsystemd0 255.4-1
install ok installed libtasn1-6:amd64 libtasn1-6 4.19.0-3+b2
install ok installed libtinfo6:amd64 libtinfo6 6.4+20240113-1
install ok installed libtirpc-common libtirpc-common 1.3.4+ds-1.1
install ok installed libtirpc3:amd64 libtirpc3 1.3.4+ds-1
install ok installed libudev1:amd64 libudev1 255.4-1
install ok installed libunistring5:amd64 libunistring5 1.1-2
install ok installed libuuid1t64:amd64 libuuid1t64 2.39.3-6.1
install ok installed libxml2:amd64 libxml2 2.9.14+dfsg-1.3+b2
install ok installed libxslt1.1:amd64 libxslt1.1 1.1.35-1
install ok installed libxxhash0:amd64 libxxhash0 0.8.2-2+b1
install ok installed libzstd1:amd64 libzstd1 1.5.5+dfsg2-2
install ok installed login login 1:4.13+dfsg1-4
install ok installed logsave logsave 1.47.0-2.3
install ok installed mawk mawk 1.3.4.20240123-1
install ok installed media-types media-types 10.1.0
install ok installed mount mount 2.39.3-6.1
install ok installed ncurses-base ncurses-base 6.4+20240113-1
install ok installed ncurses-bin ncurses-bin 6.4+20240113-1
install ok installed netbase netbase 6.4
install ok installed openssl openssl 3.1.5-1.1
install ok installed passwd passwd 1:4.13+dfsg1-4
install ok installed perl-base perl-base 5.38.2-3
install ok installed python3 python3 3.11.6-1
install ok installed python3-attr python3-attr 23.2.0-2
install ok installed python3-automat python3-automat 22.10.0-2
install ok installed python3-bcrypt python3-bcrypt 3.2.2-1
install ok installed python3-certifi python3-certifi 2023.11.17-1
install ok installed python3-cffi-backend:amd64 python3-cffi-backend 1.16.0-2+b1
install ok installed python3-chardet python3-chardet 5.2.0+dfsg-1
install ok installed python3-charset-normalizer python3-charset-normalizer 3.3.2-1
install ok installed python3-constantly python3-constantly 23.10.4-1
install ok installed python3-cryptography python3-cryptography 41.0.7-4
install ok installed python3-cssselect python3-cssselect 1.2.0-2
install ok installed python3-filelock python3-filelock 3.13.1-1
install ok installed python3-hamcrest python3-hamcrest 2.1.0-1
install ok installed python3-hyperlink python3-hyperlink 21.0.0-5
install ok installed python3-idna python3-idna 3.6-2
install ok installed python3-incremental python3-incremental 22.10.0-1
install ok installed python3-itemadapter python3-itemadapter 0.8.0-1
install ok installed python3-itemloaders python3-itemloaders 1.1.0-1
install ok installed python3-jmespath python3-jmespath 1.0.1-1
install ok installed python3-lxml:amd64 python3-lxml 5.1.0-1
install ok installed python3-minimal python3-minimal 3.11.6-1
install ok installed python3-openssl python3-openssl 24.0.0-2
install ok installed python3-packaging python3-packaging 23.2-1
install ok installed python3-parsel python3-parsel 1.8.1+dfsg-1
install ok installed python3-pkg-resources python3-pkg-resources 68.1.2-2
install ok installed python3-protego python3-protego 0.3.0+dfsg-1
install ok installed python3-pyasn1 python3-pyasn1 0.4.8-4
install ok installed python3-pyasn1-modules python3-pyasn1-modules 0.2.8-1
install ok installed python3-pydispatch python3-pydispatch 2.0.5-5
install ok installed python3-queuelib python3-queuelib 1.6.2-2
install ok installed python3-requests python3-requests 2.31.0+dfsg-1
install ok installed python3-requests-file python3-requests-file 1.5.1-2
install ok installed python3-scrapy python3-scrapy 2.11.1-1
install ok installed python3-service-identity python3-service-identity 24.1.0-1
install ok installed python3-six python3-six 1.16.0-4
install ok installed python3-tldextract python3-tldextract 3.1.2-2
install ok installed python3-twisted python3-twisted 23.10.0-2
install ok installed python3-urllib3 python3-urllib3 1.26.18-2
install ok installed python3-w3lib python3-w3lib 2.1.2-1.1
install ok installed python3-zope.interface python3-zope.interface 6.1-1
install ok installed python3.11 python3.11 3.11.8-2
install ok installed python3.11-minimal python3.11-minimal 3.11.8-2
install ok installed readline-common readline-common 8.2-3.1
install ok installed sed sed 4.9-2
install ok installed sysvinit-utils sysvinit-utils 3.08-7
install ok installed tar tar 1.35+dfsg-3
install ok installed tzdata tzdata 2024a-1
install ok installed usr-is-merged usr-is-merged 39
install ok installed util-linux util-linux 2.39.3-6.1
install ok installed zlib1g:amd64 zlib1g 1:1.3.dfsg-3+b1
0m44.6s DEBUG: Command ok: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'dpkg-query', '-W', '-f', '${Status}\\t${binary:Package}\\t${Package}\\t${Version}\\n']
0m44.6s DEBUG: Starting command: ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', '-y', '--no-install-recommends', '--force-yes', 'install', 'libssl3:amd64=3.1.5-1', 'ca-certificates-', 'libexpat1:amd64-', 'libgssapi-krb5-2:amd64-', 'libicu72:amd64-', 'libk5crypto3:amd64-', 'libkeyutils1:amd64-', 'libkrb5-3:amd64-', 'libkrb5support0:amd64-', 'libncursesw6:amd64-', 'libnsl2:amd64-', 'libpython3-stdlib:amd64-', 'libpython3.11-minimal:amd64-', 'libpython3.11-stdlib:amd64-', 'libreadline8:amd64-', 'libsqlite3-0:amd64-', 'libssl3t64:amd64-', 'libtirpc-common-', 'libtirpc3:amd64-', 'libxml2:amd64-', 'libxslt1.1:amd64-', 'media-types-', 'netbase-', 'openssl-', 'python3-', 'python3-attr-', 'python3-automat-', 'python3-bcrypt-', 'python3-certifi-', 'python3-cffi-backend:amd64-', 'python3-chardet-', 'python3-charset-normalizer-', 'python3-constantly-', 'python3-cryptography-', 'python3-cssselect-', 'python3-filelock-', 'python3-hamcrest-', 'python3-hyperlink-', 'python3-idna-', 'python3-incremental-', 'python3-itemadapter-', 'python3-itemloaders-', 'python3-jmespath-', 'python3-lxml:amd64-', 'python3-minimal-', 'python3-openssl-', 'python3-packaging-', 'python3-parsel-', 'python3-pkg-resources-', 'python3-protego-', 'python3-pyasn1-', 'python3-pyasn1-modules-', 'python3-pydispatch-', 'python3-queuelib-', 'python3-requests-', 'python3-requests-file-', 'python3-service-identity-', 'python3-six-', 'python3-tldextract-', 'python3-twisted-', 'python3-urllib3-', 'python3-w3lib-', 'python3-zope.interface-', 'python3.11-', 'python3.11-minimal-', 'readline-common-', 'python3-scrapy-']
0m48.7s DUMP:
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
ca-certificates libexpat1 libgssapi-krb5-2 libicu72 libk5crypto3
libkeyutils1 libkrb5-3 libkrb5support0 libncursesw6 libnsl2
libpython3-stdlib libpython3.11-minimal libpython3.11-stdlib libreadline8
libsqlite3-0 libssl3t64 libtirpc-common libtirpc3 libxml2 libxslt1.1
media-types netbase openssl python3 python3-attr python3-automat
python3-bcrypt python3-certifi python3-cffi-backend python3-chardet
python3-charset-normalizer python3-constantly python3-cryptography
python3-cssselect python3-filelock python3-hamcrest python3-hyperlink
python3-idna python3-incremental python3-itemadapter python3-itemloaders
python3-jmespath python3-lxml python3-minimal python3-openssl
python3-packaging python3-parsel python3-pkg-resources python3-protego
python3-pyasn1 python3-pyasn1-modules python3-pydispatch python3-queuelib
python3-requests python3-requests-file python3-scrapy
python3-service-identity python3-six python3-tldextract python3-twisted
python3-urllib3 python3-w3lib python3-zope.interface python3.11
python3.11-minimal readline-common
The following NEW packages will be installed:
libssl3
0 upgraded, 1 newly installed, 66 to remove and 0 not upgraded.
Need to get 2063 kB of archives.
After this operation, 105 MB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main amd64 libssl3 amd64 3.1.5-1 [2063 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 2063 kB in 0s (25.8 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 9063 files and directories currently installed.)
Removing python3-scrapy (2.11.1-1) ...
Removing python3-tldextract (3.1.2-2) ...
Removing python3-requests-file (1.5.1-2) ...
Removing python3-requests (2.31.0+dfsg-1) ...
Removing python3-certifi (2023.11.17-1) ...
Removing ca-certificates (20240203) ...
Removing dangling symlinks from /etc/ssl/certs... done.
Removing python3-twisted (23.10.0-2) ...
Removing python3-zope.interface (6.1-1) ...
Removing python3-urllib3 (1.26.18-2) ...
Removing python3-six (1.16.0-4) ...
Removing python3-service-identity (24.1.0-1) ...
Removing python3-automat (22.10.0-2) ...
Removing python3-attr (23.2.0-2) ...
Removing python3-itemloaders (1.1.0-1) ...
Removing python3-parsel (1.8.1+dfsg-1) ...
Removing python3-chardet (5.2.0+dfsg-1) ...
Removing python3-pkg-resources (68.1.2-2) ...
Removing python3-lxml:amd64 (5.1.0-1) ...
Removing libxslt1.1:amd64 (1.1.35-1) ...
Removing libxml2:amd64 (2.9.14+dfsg-1.3+b2) ...
Removing libicu72:amd64 (72.1-4+b1) ...
Removing openssl (3.1.5-1.1) ...
Removing python3-openssl (24.0.0-2) ...
Removing python3-cryptography (41.0.7-4) ...
dpkg: libexpat1:amd64: dependency problems, but removing anyway as you requested:
python3.11-minimal depends on libexpat1 (>= 2.1~beta3).
Removing libexpat1:amd64 (2.6.0-1) ...
dpkg: libpython3-stdlib:amd64: dependency problems, but removing anyway as you requested:
python3 depends on libpython3-stdlib (= 3.11.6-1).
Removing libpython3-stdlib:amd64 (3.11.6-1) ...
dpkg: libpython3.11-stdlib:amd64: dependency problems, but removing anyway as you requested:
python3.11 depends on libpython3.11-stdlib (= 3.11.8-2).
Removing libpython3.11-stdlib:amd64 (3.11.8-2) ...
Removing libnsl2:amd64 (1.3.0-3) ...
Removing libtirpc3:amd64 (1.3.4+ds-1) ...
Removing libgssapi-krb5-2:amd64 (1.20.1-5+b1) ...
Removing libkrb5-3:amd64 (1.20.1-5+b1) ...
Removing libk5crypto3:amd64 (1.20.1-5+b1) ...
Removing libkeyutils1:amd64 (1.6.3-3) ...
Removing libkrb5support0:amd64 (1.20.1-5+b1) ...
Removing libncursesw6:amd64 (6.4+20240113-1) ...
dpkg: libpython3.11-minimal:amd64: dependency problems, but removing anyway as you requested:
python3.11-minimal depends on libpython3.11-minimal (= 3.11.8-2).
Removing libpython3.11-minimal:amd64 (3.11.8-2) ...
Removing libreadline8:amd64 (8.2-3+b1) ...
Removing libsqlite3-0:amd64 (3.45.1-1) ...
dpkg: python3: dependency problems, but removing anyway as you requested:
python3-w3lib depends on python3:any.
python3-queuelib depends on python3:any.
python3-pydispatch depends on python3:any.
python3-pyasn1-modules depends on python3:any.
python3-pyasn1 depends on python3:any.
python3-protego depends on python3:any.
python3-packaging depends on python3:any.
python3-jmespath depends on python3:any.
python3-itemadapter depends on python3:any.
python3-incremental depends on python3:any.
python3-idna depends on python3:any.
python3-hyperlink depends on python3:any.
python3-hamcrest depends on python3:any.
python3-filelock depends on python3:any.
python3-cssselect depends on python3.
python3-constantly depends on python3:any.
python3-charset-normalizer depends on python3:any.
python3-cffi-backend:amd64 depends on python3 (<< 3.13).
python3-cffi-backend:amd64 depends on python3 (>= 3.11~).
python3-cffi-backend:amd64 depends on python3 (<< 3.13).
python3-cffi-backend:amd64 depends on python3 (>= 3.11~).
python3-bcrypt depends on python3 (>= 3~).
python3-bcrypt depends on python3:any.
python3-bcrypt depends on python3 (>= 3~).
python3-bcrypt depends on python3:any.
Removing python3 (3.11.6-1) ...
/usr/bin/python3: error while loading shared libraries: libexpat.so.1: cannot open shared object file: No such file or directory
dpkg: error processing package python3 (--remove):
installed python3 package pre-removal script subprocess returned error exit status 127
dpkg: too many errors, stopping
/usr/bin/python3: error while loading shared libraries: libexpat.so.1: cannot open shared object file: No such file or directory
dpkg: error while cleaning up:
installed python3 package post-installation script subprocess returned error exit status 127
Errors were encountered while processing:
python3
Processing was halted because there were too many errors.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m48.8s ERROR: Command failed (status=100): ['chroot', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e', 'apt-get', '-y', '--no-install-recommends', '--force-yes', 'install', 'libssl3:amd64=3.1.5-1', 'ca-certificates-', 'libexpat1:amd64-', 'libgssapi-krb5-2:amd64-', 'libicu72:amd64-', 'libk5crypto3:amd64-', 'libkeyutils1:amd64-', 'libkrb5-3:amd64-', 'libkrb5support0:amd64-', 'libncursesw6:amd64-', 'libnsl2:amd64-', 'libpython3-stdlib:amd64-', 'libpython3.11-minimal:amd64-', 'libpython3.11-stdlib:amd64-', 'libreadline8:amd64-', 'libsqlite3-0:amd64-', 'libssl3t64:amd64-', 'libtirpc-common-', 'libtirpc3:amd64-', 'libxml2:amd64-', 'libxslt1.1:amd64-', 'media-types-', 'netbase-', 'openssl-', 'python3-', 'python3-attr-', 'python3-automat-', 'python3-bcrypt-', 'python3-certifi-', 'python3-cffi-backend:amd64-', 'python3-chardet-', 'python3-charset-normalizer-', 'python3-constantly-', 'python3-cryptography-', 'python3-cssselect-', 'python3-filelock-', 'python3-hamcrest-', 'python3-hyperlink-', 'python3-idna-', 'python3-incremental-', 'python3-itemadapter-', 'python3-itemloaders-', 'python3-jmespath-', 'python3-lxml:amd64-', 'python3-minimal-', 'python3-openssl-', 'python3-packaging-', 'python3-parsel-', 'python3-pkg-resources-', 'python3-protego-', 'python3-pyasn1-', 'python3-pyasn1-modules-', 'python3-pydispatch-', 'python3-queuelib-', 'python3-requests-', 'python3-requests-file-', 'python3-service-identity-', 'python3-six-', 'python3-tldextract-', 'python3-twisted-', 'python3-urllib3-', 'python3-w3lib-', 'python3-zope.interface-', 'python3.11-', 'python3.11-minimal-', 'readline-common-', 'python3-scrapy-']
Reading package lists...
Building dependency tree...
Reading state information...
The following packages will be REMOVED:
ca-certificates libexpat1 libgssapi-krb5-2 libicu72 libk5crypto3
libkeyutils1 libkrb5-3 libkrb5support0 libncursesw6 libnsl2
libpython3-stdlib libpython3.11-minimal libpython3.11-stdlib libreadline8
libsqlite3-0 libssl3t64 libtirpc-common libtirpc3 libxml2 libxslt1.1
media-types netbase openssl python3 python3-attr python3-automat
python3-bcrypt python3-certifi python3-cffi-backend python3-chardet
python3-charset-normalizer python3-constantly python3-cryptography
python3-cssselect python3-filelock python3-hamcrest python3-hyperlink
python3-idna python3-incremental python3-itemadapter python3-itemloaders
python3-jmespath python3-lxml python3-minimal python3-openssl
python3-packaging python3-parsel python3-pkg-resources python3-protego
python3-pyasn1 python3-pyasn1-modules python3-pydispatch python3-queuelib
python3-requests python3-requests-file python3-scrapy
python3-service-identity python3-six python3-tldextract python3-twisted
python3-urllib3 python3-w3lib python3-zope.interface python3.11
python3.11-minimal readline-common
The following NEW packages will be installed:
libssl3
0 upgraded, 1 newly installed, 66 to remove and 0 not upgraded.
Need to get 2063 kB of archives.
After this operation, 105 MB disk space will be freed.
Get:1 http://deb.debian.org/debian sid/main amd64 libssl3 amd64 3.1.5-1 [2063 kB]
debconf: delaying package configuration, since apt-utils is not installed
Fetched 2063 kB in 0s (25.8 MB/s)
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 9063 files and directories currently installed.)
Removing python3-scrapy (2.11.1-1) ...
Removing python3-tldextract (3.1.2-2) ...
Removing python3-requests-file (1.5.1-2) ...
Removing python3-requests (2.31.0+dfsg-1) ...
Removing python3-certifi (2023.11.17-1) ...
Removing ca-certificates (20240203) ...
Removing dangling symlinks from /etc/ssl/certs... done.
Removing python3-twisted (23.10.0-2) ...
Removing python3-zope.interface (6.1-1) ...
Removing python3-urllib3 (1.26.18-2) ...
Removing python3-six (1.16.0-4) ...
Removing python3-service-identity (24.1.0-1) ...
Removing python3-automat (22.10.0-2) ...
Removing python3-attr (23.2.0-2) ...
Removing python3-itemloaders (1.1.0-1) ...
Removing python3-parsel (1.8.1+dfsg-1) ...
Removing python3-chardet (5.2.0+dfsg-1) ...
Removing python3-pkg-resources (68.1.2-2) ...
Removing python3-lxml:amd64 (5.1.0-1) ...
Removing libxslt1.1:amd64 (1.1.35-1) ...
Removing libxml2:amd64 (2.9.14+dfsg-1.3+b2) ...
Removing libicu72:amd64 (72.1-4+b1) ...
Removing openssl (3.1.5-1.1) ...
Removing python3-openssl (24.0.0-2) ...
Removing python3-cryptography (41.0.7-4) ...
dpkg: libexpat1:amd64: dependency problems, but removing anyway as you requested:
python3.11-minimal depends on libexpat1 (>= 2.1~beta3).
Removing libexpat1:amd64 (2.6.0-1) ...
dpkg: libpython3-stdlib:amd64: dependency problems, but removing anyway as you requested:
python3 depends on libpython3-stdlib (= 3.11.6-1).
Removing libpython3-stdlib:amd64 (3.11.6-1) ...
dpkg: libpython3.11-stdlib:amd64: dependency problems, but removing anyway as you requested:
python3.11 depends on libpython3.11-stdlib (= 3.11.8-2).
Removing libpython3.11-stdlib:amd64 (3.11.8-2) ...
Removing libnsl2:amd64 (1.3.0-3) ...
Removing libtirpc3:amd64 (1.3.4+ds-1) ...
Removing libgssapi-krb5-2:amd64 (1.20.1-5+b1) ...
Removing libkrb5-3:amd64 (1.20.1-5+b1) ...
Removing libk5crypto3:amd64 (1.20.1-5+b1) ...
Removing libkeyutils1:amd64 (1.6.3-3) ...
Removing libkrb5support0:amd64 (1.20.1-5+b1) ...
Removing libncursesw6:amd64 (6.4+20240113-1) ...
dpkg: libpython3.11-minimal:amd64: dependency problems, but removing anyway as you requested:
python3.11-minimal depends on libpython3.11-minimal (= 3.11.8-2).
Removing libpython3.11-minimal:amd64 (3.11.8-2) ...
Removing libreadline8:amd64 (8.2-3+b1) ...
Removing libsqlite3-0:amd64 (3.45.1-1) ...
dpkg: python3: dependency problems, but removing anyway as you requested:
python3-w3lib depends on python3:any.
python3-queuelib depends on python3:any.
python3-pydispatch depends on python3:any.
python3-pyasn1-modules depends on python3:any.
python3-pyasn1 depends on python3:any.
python3-protego depends on python3:any.
python3-packaging depends on python3:any.
python3-jmespath depends on python3:any.
python3-itemadapter depends on python3:any.
python3-incremental depends on python3:any.
python3-idna depends on python3:any.
python3-hyperlink depends on python3:any.
python3-hamcrest depends on python3:any.
python3-filelock depends on python3:any.
python3-cssselect depends on python3.
python3-constantly depends on python3:any.
python3-charset-normalizer depends on python3:any.
python3-cffi-backend:amd64 depends on python3 (<< 3.13).
python3-cffi-backend:amd64 depends on python3 (>= 3.11~).
python3-cffi-backend:amd64 depends on python3 (<< 3.13).
python3-cffi-backend:amd64 depends on python3 (>= 3.11~).
python3-bcrypt depends on python3 (>= 3~).
python3-bcrypt depends on python3:any.
python3-bcrypt depends on python3 (>= 3~).
python3-bcrypt depends on python3:any.
Removing python3 (3.11.6-1) ...
/usr/bin/python3: error while loading shared libraries: libexpat.so.1: cannot open shared object file: No such file or directory
dpkg: error processing package python3 (--remove):
installed python3 package pre-removal script subprocess returned error exit status 127
dpkg: too many errors, stopping
/usr/bin/python3: error while loading shared libraries: libexpat.so.1: cannot open shared object file: No such file or directory
dpkg: error while cleaning up:
installed python3 package post-installation script subprocess returned error exit status 127
Errors were encountered while processing:
python3
Processing was halted because there were too many errors.
W: --force-yes is deprecated, use one of the options starting with --allow instead.
E: Sub-process /usr/bin/dpkg returned an error code (1)
0m49.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/shm']
0m49.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/shm']
0m49.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/console']
0m49.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/console']
0m49.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/ptmx']
0m49.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/ptmx']
0m49.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/pts']
0m49.1s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/dev/pts']
0m49.1s DEBUG: Starting command: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/proc']
0m49.2s DEBUG: Command ok: ['umount', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e/proc']
0m49.2s DEBUG: Starting command: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m49.3s DEBUG: Command ok: ['rm', '-rf', '--one-file-system', '/srv/piuparts.debian.org/tmp/tmpq3za2o4e']
0m49.3s DEBUG: Removed directory tree at /srv/piuparts.debian.org/tmp/tmpq3za2o4e
0m49.3s ERROR: piuparts run ends.
ret=1
End: 2024-03-01 10:03:19 GMT
Reply to: