--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: gdm3: greeter garbles up screen, no input possible, cannot even switch to tty
- From: Axel Stammler <axst@users.sourceforge.net>
- Date: Tue, 16 Jul 2013 12:43:19 +0100
- Message-id: <20130716114319.3584.63554.reportbug@malatya.anadolu>
Package: gdm3
Version: 3.4.1-8
Severity: important
Dear Maintainer,
I just booted the computer after installing Wheezy (no upgrade). When GDM started, the screen become unreadable (wrong X module?). As no input is accepted, I cannot shut down the system properly except via SSH, which I am also using to write this report.
Even though I established an SSH connection and called "/etc/init.d/gdm3 stop" as root without receiving an error message, Xorg did not shut down. I had to use "kill -9" as a simple "kill" did not work. Then /var/log/Xorg.0.log had become so large I could not even copy it to my home directory.
One problem is that I do not often have access to this computer which the installation has now rendered unusable.
lspci:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:0a.0 Network controller: AVM GmbH A1 ISDN [Fritz] (rev 02)
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 86)
00:10.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:14.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev 46)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Rage 128 PF/PRO AGP 4x TMDS
I enclose /var/log/Xorg.0.log (edited).
This is my third Wheezy installation on systems on which Squeeze's GDM used to run perfectly. Only one installation resulted in a satisfactory state.
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core)
Locale: LANG=en_IE.UTF-8, LC_CTYPE=en_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages gdm3 depends on:
ii accountsservice 0.6.21-8
ii adduser 3.113+nmu3
ii dconf-gsettings-backend 0.12.1-3
ii dconf-tools 0.12.1-3
ii debconf [debconf-2.0] 1.5.49
ii dpkg 1.16.10
ii gir1.2-freedesktop 1.32.1-1
ii gir1.2-glib-2.0 1.32.1-1
ii gnome-session [x-session-manager] 3.4.2.1-4
ii gnome-session-bin 3.4.2.1-4
ii gnome-session-fallback [x-session-manage 3.4.2.1-4
ii gnome-settings-daemon 3.4.2+git20121218.7c1322-3+deb7u1
ii gnome-terminal [x-terminal-emulator] 3.4.1.1-2
ii gsettings-desktop-schemas 3.4.2-3
ii libaccountsservice0 0.6.21-8
ii libatk1.0-0 2.4.0-2
ii libattr1 1:2.4.46-8
ii libaudit0 1:1.7.18-1.1
ii libc6 2.13-38
ii libcairo-gobject2 1.12.2-3
ii libcairo2 1.12.2-3
ii libcanberra-gtk3-0 0.28-6
ii libcanberra0 0.28-6
ii libdbus-1-3 1.6.8-1+deb7u1
ii libdbus-glib-1-2 0.100.2-1
ii libfontconfig1 2.9.0-7.1
ii libgdk-pixbuf2.0-0 2.26.1-1
ii libglib2.0-0 2.33.12+really2.32.4-5
ii libglib2.0-bin 2.33.12+really2.32.4-5
ii libgtk-3-0 3.4.2-6
ii libpam-modules 1.1.3-7.1
ii libpam-runtime 1.1.3-7.1
ii libpam0g 1.1.3-7.1
ii libpango1.0-0 1.30.0-1
ii librsvg2-common 2.36.1-1
ii libselinux1 2.1.9-5
ii libupower-glib1 0.9.17-1
ii libwrap0 7.6.q-24
ii libx11-6 2:1.5.0-1+deb7u1
ii libxau6 1:1.0.7-1
ii libxdmcp6 1:1.1.1-1
ii libxklavier16 5.2.1-1
ii libxrandr2 2:1.3.2-2+deb7u1
ii lsb-base 4.1+Debian8+deb7u1
ii metacity [x-window-manager] 1:2.34.3-4
ii policykit-1-gnome 0.105-2
ii upower 0.9.17-1
ii x11-common 1:7.7+3~deb7u1
ii x11-xserver-utils 7.7~3
ii xterm [x-terminal-emulator] 278-4
Versions of packages gdm3 recommends:
ii at-spi2-core 2.5.3-2
ii desktop-base 7.0.3
ii gnome-icon-theme 3.4.0-2
ii gnome-icon-theme-symbolic 3.4.0-2
ii x11-xkb-utils 7.7~1
ii xserver-xephyr 2:1.12.4-6
ii xserver-xorg 1:7.7+3~deb7u1
ii zenity 3.4.0-2
Versions of packages gdm3 suggests:
ii gnome-orca 3.4.2-2
ii gnome-shell 3.4.2-7
pn gok <none>
ii libpam-gnome-keyring 3.4.1-5
-- debconf information:
* shared/default-x-display-manager: gdm3
gdm3/daemon_name: /usr/sbin/gdm3
[ 22.465]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 22.465] X Protocol Version 11, Revision 0
[ 22.465] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 22.465] Current Operating System: Linux malatya 3.2.0-4-686-pae #1 SMP Debian 3.2.46-1 i686
[ 22.465] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=7e49b3d1-3b49-4e0d-8358-73678462f965 ro quiet
[ 22.465] Build Date: 17 April 2013 11:13:16AM
[ 22.465] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 22.465] Current version of pixman: 0.26.0
[ 22.465] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.466] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.466] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 16 11:48:02 2013
[ 22.511] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 22.554] (==) No Layout section. Using the first Screen section.
[ 22.554] (==) No screen section available. Using defaults.
[ 22.554] (**) |-->Screen "Default Screen Section" (0)
[ 22.554] (**) | |-->Monitor "<default monitor>"
[ 22.556] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.556] (==) Automatically adding devices
[ 22.556] (==) Automatically enabling devices
[ 22.596] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 22.596] Entry deleted from font path.
[ 22.623] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 22.623] Entry deleted from font path.
[ 22.623] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 22.623] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.623] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.623] (II) Loader magic: 0xb77735a0
[ 22.623] (II) Module ABI versions:
[ 22.623] X.Org ANSI C Emulation: 0.4
[ 22.623] X.Org Video Driver: 12.1
[ 22.623] X.Org XInput driver : 16.0
[ 22.623] X.Org Server Extension : 6.0
[ 22.624] (--) PCI:*(0:1:0:0) 1002:5046:1002:0008 rev 0, Mem @ 0xd8000000/67108864, 0xdd000000/16384, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 22.625] (II) Open ACPI successful (/var/run/acpid.socket)
[ 22.625] (II) LoadModule: "extmod"
[ 22.627] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.737] (II) Module extmod: vendor="X.Org Foundation"
[ 22.737] compiled for 1.12.4, module version = 1.0.0
[ 22.737] Module class: X.Org Server Extension
[ 22.737] ABI class: X.Org Server Extension, version 6.0
[ 22.737] (II) Loading extension SELinux
[ 22.737] (II) Loading extension MIT-SCREEN-SAVER
[ 22.737] (II) Loading extension XFree86-VidModeExtension
[ 22.737] (II) Loading extension XFree86-DGA
[ 22.737] (II) Loading extension DPMS
[ 22.737] (II) Loading extension XVideo
[ 22.737] (II) Loading extension XVideo-MotionCompensation
[ 22.737] (II) Loading extension X-Resource
[ 22.737] (II) LoadModule: "dbe"
[ 22.738] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.756] (II) Module dbe: vendor="X.Org Foundation"
[ 22.756] compiled for 1.12.4, module version = 1.0.0
[ 22.756] Module class: X.Org Server Extension
[ 22.756] ABI class: X.Org Server Extension, version 6.0
[ 22.756] (II) Loading extension DOUBLE-BUFFER
[ 22.756] (II) LoadModule: "glx"
[ 22.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.779] (II) Module glx: vendor="X.Org Foundation"
[ 22.779] compiled for 1.12.4, module version = 1.0.0
[ 22.779] ABI class: X.Org Server Extension, version 6.0
[ 22.779] (==) AIGLX enabled
[ 22.779] (II) Loading extension GLX
[ 22.779] (II) LoadModule: "record"
[ 22.780] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.782] (II) Module record: vendor="X.Org Foundation"
[ 22.782] compiled for 1.12.4, module version = 1.13.0
[ 22.782] Module class: X.Org Server Extension
[ 22.782] ABI class: X.Org Server Extension, version 6.0
[ 22.782] (II) Loading extension RECORD
[ 22.782] (II) LoadModule: "dri"
[ 22.782] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.789] (II) Module dri: vendor="X.Org Foundation"
[ 22.789] compiled for 1.12.4, module version = 1.0.0
[ 22.790] ABI class: X.Org Server Extension, version 6.0
[ 22.790] (II) Loading extension XFree86-DRI
[ 22.790] (II) LoadModule: "dri2"
[ 22.790] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.791] (II) Module dri2: vendor="X.Org Foundation"
[ 22.791] compiled for 1.12.4, module version = 1.2.0
[ 22.791] ABI class: X.Org Server Extension, version 6.0
[ 22.791] (II) Loading extension DRI2
[ 22.791] (==) Matched ati as autoconfigured driver 0
[ 22.791] (==) Matched vesa as autoconfigured driver 1
[ 22.791] (==) Matched fbdev as autoconfigured driver 2
[ 22.791] (==) Assigned the driver to the xf86ConfigLayout
[ 22.791] (II) LoadModule: "ati"
[ 22.792] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 22.807] (II) Module ati: vendor="X.Org Foundation"
[ 22.807] compiled for 1.12.4, module version = 6.14.99
[ 22.807] Module class: X.Org Video Driver
[ 22.807] ABI class: X.Org Video Driver, version 12.1
[ 22.807] (II) LoadModule: "r128"
[ 22.808] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 22.833] (II) Module r128: vendor="X.Org Foundation"
[ 22.833] compiled for 1.12.1, module version = 6.8.2
[ 22.833] Module class: X.Org Video Driver
[ 22.833] ABI class: X.Org Video Driver, version 12.0
[ 22.833] (II) LoadModule: "vesa"
[ 22.833] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.843] (II) Module vesa: vendor="X.Org Foundation"
[ 22.843] compiled for 1.12.1, module version = 2.3.1
[ 22.843] Module class: X.Org Video Driver
[ 22.843] ABI class: X.Org Video Driver, version 12.0
[ 22.843] (II) LoadModule: "fbdev"
[ 22.843] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 22.851] (II) Module fbdev: vendor="X.Org Foundation"
[ 22.851] compiled for 1.12.1, module version = 0.4.2
[ 22.851] ABI class: X.Org Video Driver, version 12.0
[ 22.851] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 22.852] (II) VESA: driver for VESA chipsets: vesa
[ 22.852] (II) FBDEV: driver for framebuffer: fbdev
[ 22.852] (++) using VT number 7
[ 22.858] (WW) Falling back to old probe method for vesa
[ 22.858] (WW) Falling back to old probe method for fbdev
[ 22.858] (II) Loading sub module "fbdevhw"
[ 22.858] (II) LoadModule: "fbdevhw"
[ 22.859] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 22.860] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 22.860] compiled for 1.12.4, module version = 0.0.2
[ 22.860] ABI class: X.Org Video Driver, version 12.1
[ 22.860] (EE) open /dev/fb0: No such file or directory
[ 22.861] (II) R128(0): PCI bus 1 card 0 func 0
[ 22.861] (II) R128(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.861] (==) R128(0): Depth 24, (--) framebuffer bpp 32
[ 22.861] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 22.861] (==) R128(0): Default visual is TrueColor
[ 22.861] (II) Loading sub module "vgahw"
[ 22.861] (II) LoadModule: "vgahw"
[ 22.861] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 22.864] (II) Module vgahw: vendor="X.Org Foundation"
[ 22.865] compiled for 1.12.4, module version = 0.1.0
[ 22.865] ABI class: X.Org Video Driver, version 12.1
[ 22.865] (II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 22.865] (==) R128(0): RGB weight 888
[ 22.865] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 22.865] (II) Loading sub module "int10"
[ 22.865] (II) LoadModule: "int10"
[ 22.865] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 22.867] (II) Module int10: vendor="X.Org Foundation"
[ 22.867] compiled for 1.12.4, module version = 1.0.0
[ 22.867] ABI class: X.Org Video Driver, version 12.1
[ 22.867] (II) R128(0): initializing int10
[ 22.869] (II) R128(0): Primary V_BIOS segment is: 0xc000
[ 22.869] (--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
[ 22.869] (--) R128(0): Linear framebuffer at 0xd8000000
[ 22.869] (--) R128(0): MMIO registers at 0xdd000000
[ 22.869] (--) R128(0): VideoRAM: 32768 kByte (64-bit SDR SGRAM 1:1)
[ 22.869] (**) R128(0): Using external CRT for display
[ 22.871] (II) R128(0): Primary Display == Type 3
[ 22.871] (WW) R128(0): Can't determine panel dimensions, and none specified.
Disabling programming of FP registers.
[ 22.871] (II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=40000; xclk=12000
[ 22.871] (II) Loading sub module "ddc"
[ 22.871] (II) LoadModule: "ddc"
[ 22.871] (II) Module "ddc" already built-in
[ 22.871] (II) Loading sub module "vbe"
[ 22.871] (II) LoadModule: "vbe"
[ 22.873] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 22.874] (II) Module vbe: vendor="X.Org Foundation"
[ 22.874] compiled for 1.12.4, module version = 1.1.0
[ 22.874] ABI class: X.Org Video Driver, version 12.1
[ 22.874] (II) R128(0): VESA BIOS detected
[ 22.874] (II) R128(0): VESA VBE Version 2.0
[ 22.874] (II) R128(0): VESA VBE Total Mem: 32768 kB
[ 22.874] (II) R128(0): VESA VBE OEM: ATI RAGE128
[ 22.874] (II) R128(0): VESA VBE OEM Software Rev: 1.0
[ 22.874] (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
[ 22.874] (II) R128(0): VESA VBE OEM Product: R128
[ 22.874] (II) R128(0): VESA VBE OEM Product Rev: 01.00
[ 22.874] (II) Loading sub module "ddc"
[ 22.874] (II) LoadModule: "ddc"
[ 22.874] (II) Module "ddc" already built-in
[ 22.965] (II) R128(0): VESA VBE DDC supported
[ 22.965] (II) R128(0): VESA VBE DDC Level 2
[ 22.965] (II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
[ 23.386] (II) R128(0): VESA VBE DDC read successfully
[ 23.386] (II) R128(0): Manufacturer: ACR Model: ad52 Serial#: 1678787592
[ 23.386] (II) R128(0): Year: 2006 Week: 41
[ 23.386] (II) R128(0): EDID Version: 1.3
[ 23.387] (II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 23.387] (II) R128(0): Sync: Separate
[ 23.387] (II) R128(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 23.387] (II) R128(0): Gamma: 2.20
[ 23.387] (II) R128(0): DPMS capabilities: Off; RGB/Color Display
[ 23.387] (II) R128(0): Default color space is primary color space
[ 23.387] (II) R128(0): First detailed timing is preferred mode
[ 23.387] (II) R128(0): redX: 0.642 redY: 0.348 greenX: 0.288 greenY: 0.601
[ 23.387] (II) R128(0): blueX: 0.143 blueY: 0.072 whiteX: 0.313 whiteY: 0.329
[ 23.387] (II) R128(0): Supported established timings:
[ 23.387] (II) R128(0): 720x400@70Hz
[ 23.387] (II) R128(0): 640x480@60Hz
[ 23.387] (II) R128(0): 640x480@67Hz
[ 23.387] (II) R128(0): 640x480@72Hz
[ 23.387] (II) R128(0): 640x480@75Hz
[ 23.387] (II) R128(0): 800x600@56Hz
[ 23.387] (II) R128(0): 800x600@60Hz
[ 23.387] (II) R128(0): 800x600@72Hz
[ 23.387] (II) R128(0): 800x600@75Hz
[ 23.387] (II) R128(0): 832x624@75Hz
[ 23.387] (II) R128(0): 1024x768@60Hz
[ 23.387] (II) R128(0): 1024x768@70Hz
[ 23.387] (II) R128(0): 1024x768@75Hz
[ 23.387] (II) R128(0): 1280x1024@75Hz
[ 23.387] (II) R128(0): Manufacturer's mask: 0
[ 23.387] (II) R128(0): Supported standard timings:
[ 23.387] (II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.387] (II) R128(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.387] (II) R128(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 23.387] (II) R128(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 23.387] (II) R128(0): Supported detailed timing:
[ 23.387] (II) R128(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 23.387] (II) R128(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 23.387] (II) R128(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 23.387] (II) R128(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[ 23.387] (II) R128(0): Monitor name: Acer AL1916W
[ 23.387] (II) R128(0): Serial No: ETL5209126
[ 23.387] (II) R128(0): EDID (in hex):
[ 23.387] (II) R128(0): 00ffffffffffff00047252ad08441064
[ 23.393] (II) R128(0): 2910010368291a782e4fa5a459499924
[ 23.393] (II) R128(0): 125054bfef0081808140714f95000101
[ 23.393] (II) R128(0): 0101010101019a29a0d0518422305098
[ 23.393] (II) R128(0): 360098ff1000001c000000fd00384c1e
[ 23.393] (II) R128(0): 520e000a202020202020000000fc0041
[ 23.393] (II) R128(0): 63657220414c31393136570a000000ff
[ 23.393] (II) R128(0): 0045544c353230393132360a202000d8
[ 23.393] (II) R128(0): EDID vendor "ACR", prod id 44370
[ 23.404] (II) R128(0): Using EDID range info for horizontal sync
[ 23.404] (II) R128(0): Using EDID range info for vertical refresh
[ 23.404] (II) R128(0): Printing DDC gathered Modelines:
[ 23.405] (II) R128(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 23.405] (II) R128(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 23.405] (II) R128(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 23.405] (II) R128(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 23.405] (II) R128(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 23.405] (II) R128(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 23.405] (II) R128(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 23.405] (II) R128(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 23.405] (II) R128(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 23.405] (II) R128(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 23.405] (II) R128(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 23.405] (II) R128(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 23.405] (II) R128(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 23.405] (II) R128(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 23.405] (II) R128(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 23.405] (II) R128(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 23.405] (II) R128(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 23.405] (II) R128(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 23.405] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.411] (II) Loading sub module "i2c"
[ 23.411] (II) LoadModule: "i2c"
[ 23.411] (II) Module "i2c" already built-in
[ 23.411] (II) R128(0): I2C bus "DDC" initialized.
[ 23.411] (II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
[ 23.414] (EE) R128(0): No DFP detected
[ 23.421] (II) R128(0): <default monitor>: Using hsync range of 30.00-82.00 kHz
[ 23.421] (II) R128(0): <default monitor>: Using vrefresh range of 56.00-76.00 Hz
[ 23.421] (II) R128(0): <default monitor>: Using maximum pixel clock of 145.00 MHz
[ 23.421] (II) R128(0): Estimated virtual size for aspect ratio 1.5769 is 1440x900
[ 23.421] (II) R128(0): Clock range: 12.50 to 400.00 MHz
[ 23.421] (II) R128(0): Not using default mode "640x350" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "320x175" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "640x400" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "320x200" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "720x400" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "360x200" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "640x480" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "320x240" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "800x600" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "400x300" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "1024x768i" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "512x384i" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "1024x768" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "512x384" (vrefresh out of range)
[ 23.421] (II) R128(0): Not using default mode "1280x960" (height too large for virtual size)
[ 23.421] (II) R128(0): Not using default mode "1280x960" (height too large for virtual size)
[ 23.421] (II) R128(0): Not using default mode "640x480" (hsync out of range)
[ 23.421] (II) R128(0): Not using default mode "1280x1024" (height too large for virtual size)
[ 23.421] (II) R128(0): Not using default mode "1280x1024" (height too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1280x1024" (height too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "640x512" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "800x600" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1792x1344" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1792x1344" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "896x672" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1856x1392" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1856x1392" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "928x696" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1920x1440" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1920x1440" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1152x864" (vrefresh out of range)
[ 23.422] (II) R128(0): Not using default mode "576x432" (vrefresh out of range)
[ 23.422] (II) R128(0): Not using default mode "1152x864" (vrefresh out of range)
[ 23.422] (II) R128(0): Not using default mode "576x432" (vrefresh out of range)
[ 23.422] (II) R128(0): Not using default mode "1152x864" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "576x432" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
[ 23.422] (II) R128(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1400x1050" (height too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "700x525" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1600x1024" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1680x1050" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1680x1050" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1680x1050" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1680x1050" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1680x1050" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "840x525" (hsync out of range)
[ 23.422] (II) R128(0): Not using default mode "1920x1080" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1920x1200" (width too large for virtual size)
[ 23.422] (II) R128(0): Not using default mode "1920x1440" (width too large for virtual size)
[ 23.423] (II) R128(0): Not using default mode "960x720" (hsync out of range)
[ 23.423] (II) R128(0): Not using default mode "2048x1536" (width too large for virtual size)
[ 23.423] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.423] (II) R128(0): Not using default mode "2048x1536" (width too large for virtual size)
[ 23.423] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.423] (II) R128(0): Not using default mode "2048x1536" (width too large for virtual size)
[ 23.423] (II) R128(0): Not using default mode "1024x768" (hsync out of range)
[ 23.423] (II) R128(0): Not using driver mode "1280x1024" (height too large for virtual size)
[ 23.423] (II) R128(0): Not using driver mode "1280x1024" (height too large for virtual size)
[ 23.423] (II) R128(0): Not using driver mode "1280x960" (height too large for virtual size)
[ 23.423] (--) R128(0): Virtual size is 1440x900 (pitch 1440)
[ 23.423] (**) R128(0): *Driver mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz
[ 23.423] (II) R128(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz ezP)
[ 23.423] (**) R128(0): *Default mode "1440x900": 106.5 MHz, 55.9 kHz, 59.9 Hz
[ 23.423] (II) R128(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz zd)
[ 23.423] (**) R128(0): *Default mode "1360x768": 84.8 MHz, 47.7 kHz, 59.8 Hz
[ 23.423] (II) R128(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz zd)
[ 23.423] (**) R128(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[ 23.423] (II) R128(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz ez)
[ 23.423] (**) R128(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
[ 23.423] (II) R128(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz zd)
[ 23.423] (**) R128(0): *Default mode "1152x864": 105.0 MHz, 67.6 kHz, 75.0 Hz
[ 23.423] (II) R128(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz zd)
[ 23.424] (**) R128(0): *Default mode "1152x864": 96.8 MHz, 63.0 kHz, 70.0 Hz
[ 23.424] (II) R128(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz zd)
[ 23.424] (**) R128(0): *Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
[ 23.424] (II) R128(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz zd)
[ 23.424] (**) R128(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 23.424] (II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz ez)
[ 23.424] (**) R128(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 23.424] (II) R128(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz ez)
[ 23.424] (**) R128(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 23.424] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz ez)
[ 23.424] (**) R128(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 23.424] (II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 23.424] (**) R128(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 23.424] (II) R128(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz zd)
[ 23.424] (**) R128(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 23.424] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 23.424] (**) R128(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[ 23.424] (II) R128(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz ez)
[ 23.424] (**) R128(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
[ 23.424] (II) R128(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz zd)
[ 23.424] (**) R128(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 23.424] (II) R128(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz ez)
[ 23.424] (**) R128(0): *Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 23.424] (II) R128(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz ez)
[ 23.424] (**) R128(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 23.424] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz ez)
[ 23.425] (**) R128(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 23.425] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz ez)
[ 23.425] (**) R128(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 23.425] (II) R128(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz zd)
[ 23.425] (**) R128(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 23.425] (II) R128(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz zd)
[ 23.425] (**) R128(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
[ 23.425] (II) R128(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz zd)
[ 23.425] (**) R128(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 23.425] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 23.425] (**) R128(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
[ 23.425] (II) R128(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz zd)
[ 23.425] (**) R128(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 23.425] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 23.426] (**) R128(0): *Default mode "840x525": 93.5 MHz, 82.3 kHz, 75.0 Hz (D)
[ 23.426] (II) R128(0): Modeline "840x525"x75.0 93.50 840 900 988 1136 525 526 529 549 doublescan -hsync +vsync (82.3 kHz zd)
[ 23.426] (**) R128(0): *Default mode "840x525": 87.0 MHz, 76.6 kHz, 69.9 Hz (D)
[ 23.426] (II) R128(0): Modeline "840x525"x69.9 87.00 840 900 988 1136 525 526 529 548 doublescan -hsync +vsync (76.6 kHz zd)
[ 23.426] (**) R128(0): *Default mode "840x525": 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
[ 23.426] (II) R128(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz zd)
[ 23.426] (**) R128(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
[ 23.426] (II) R128(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz zd)
[ 23.426] (**) R128(0): *Default mode "700x525": 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
[ 23.426] (II) R128(0): Modeline "700x525"x70.1 72.53 700 748 824 948 525 525 527 546 doublescan -hsync +vsync (76.5 kHz zd)
[ 23.426] (**) R128(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[ 23.426] (II) R128(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz zd)
[ 23.426] (**) R128(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
[ 23.426] (II) R128(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[ 23.426] (**) R128(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[ 23.426] (II) R128(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[ 23.426] (**) R128(0): *Default mode "720x450": 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
[ 23.426] (II) R128(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz zd)
[ 23.426] (**) R128(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz ez)
[ 23.427] (**) R128(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz ez)
[ 23.427] (**) R128(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz ez)
[ 23.427] (**) R128(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz ez)
[ 23.427] (**) R128(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz zd)
[ 23.427] (**) R128(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz zd)
[ 23.427] (**) R128(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[ 23.427] (**) R128(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 23.427] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 23.427] (**) R128(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
[ 23.427] (II) R128(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz ez)
[ 23.427] (**) R128(0): *Default mode "680x384": 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 23.427] (**) R128(0): *Default mode "680x384": 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 23.427] (II) R128(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 23.427] (**) R128(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[ 23.427] (**) R128(0): *Default mode "576x432": 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432 432 434 451 doublescan -hsync +vsync (67.6 kHz zd)
[ 23.427] (**) R128(0): *Default mode "576x432": 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432 432 434 450 doublescan -hsync +vsync (63.0 kHz zd)
[ 23.427] (**) R128(0): *Default mode "576x432": 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
[ 23.427] (II) R128(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz zd)
[ 23.427] (**) R128(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[ 23.427] (**) R128(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[ 23.427] (II) R128(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[ 23.427] (**) R128(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 23.427] (II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 23.427] (**) R128(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[ 23.428] (II) R128(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[ 23.428] (**) R128(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[ 23.428] (II) R128(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[ 23.428] (**) R128(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[ 23.428] (II) R128(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[ 23.428] (**) R128(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 23.428] (II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 23.428] (**) R128(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 23.428] (II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 23.429] (**) R128(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
[ 23.429] (II) R128(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz zd)
[ 23.429] (**) R128(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
[ 23.429] (II) R128(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz zd)
[ 23.429] (**) R128(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
[ 23.429] (II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz zd)
[ 23.429] (**) R128(0): Display dimensions: (410, 260) mm
[ 23.429] (**) R128(0): DPI set to (89, 87)
[ 23.429] (II) Loading sub module "fb"
[ 23.429] (II) LoadModule: "fb"
[ 23.429] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.444] (II) Module fb: vendor="X.Org Foundation"
[ 23.444] compiled for 1.12.4, module version = 1.0.0
[ 23.444] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.444] (II) Loading sub module "ramdac"
[ 23.444] (II) LoadModule: "ramdac"
[ 23.444] (II) Module "ramdac" already built-in
[ 23.444] (II) Loading sub module "shadowfb"
[ 23.444] (II) LoadModule: "shadowfb"
[ 23.444] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 23.454] (II) Module shadowfb: vendor="X.Org Foundation"
[ 23.454] compiled for 1.12.4, module version = 1.0.0
[ 23.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.454] (II) R128(0): Page flipping disabled
[ 23.454] (!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
[ 23.454] (II) UnloadModule: "vesa"
[ 23.454] (II) Unloading vesa
[ 23.454] (II) UnloadModule: "fbdev"
[ 23.454] (II) Unloading fbdev
[ 23.454] (II) UnloadSubModule: "fbdevhw"
[ 23.454] (II) Unloading fbdevhw
[ 23.454] (--) Depth 24 pixmap format is 32 bpp
[ 23.589] drmOpenDevice: node name is /dev/dri/card0
[ 23.594] drmOpenDevice: node name is /dev/dri/card0
[ 23.716] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 23.717] drmOpenDevice: node name is /dev/dri/card0
[ 23.717] drmOpenDevice: open result is 9, (OK)
[ 23.717] drmOpenByBusid: drmOpenMinor returns 9
[ 23.717] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 23.717] (II) [drm] loaded kernel module for "r128" driver.
[ 23.717] (II) [drm] DRM interface version 1.4
[ 23.717] (II) [drm] DRM open master succeeded.
[ 23.717] (II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
[ 23.718] (II) R128(0): [drm] framebuffer handle = 0xd8000000
[ 23.719] (II) R128(0): [drm] added 1 reserved context for kernel
[ 23.719] (II) R128(0): X context handle = 0x1
[ 23.719] (II) R128(0): [drm] installed DRM signal handler
[ 23.719] (II) R128(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x3189; Card 0x1002/0x5046]
[ 23.740] (II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
[ 23.741] (II) R128(0): [agp] ring handle = 0xd0000000
[ 23.741] (II) R128(0): [agp] Ring mapped at 0xb6ea6000
[ 23.741] (II) R128(0): [agp] ring read ptr handle = 0xd0101000
[ 23.741] (II) R128(0): [agp] Ring read ptr mapped at 0xb7557000
[ 23.741] (II) R128(0): [agp] vertex/indirect buffers handle = 0xd0102000
[ 23.742] (II) R128(0): [agp] Vertex/indirect buffers mapped at 0xb4c00000
[ 23.742] (II) R128(0): [agp] AGP texture map handle = 0xd0302000
[ 23.742] (II) R128(0): [agp] AGP Texture map mapped at 0xb4720000
[ 23.743] (II) R128(0): [drm] register handle = 0xdd000000
[ 23.743] (II) R128(0): [dri] Visual configs initialized
[ 23.894] (II) R128(0): CCE in BM mode
[ 23.894] (II) R128(0): Using 8 MB AGP aperture
[ 23.894] (II) R128(0): Using 1 MB for the ring buffer
[ 23.894] (II) R128(0): Using 2 MB for vertex/indirect buffers
[ 23.894] (II) R128(0): Using 5 MB for AGP textures
[ 23.894] (II) R128(0): Memory manager initialized to (0,0) (1440,3640)
[ 23.894] (II) R128(0): Reserved area from (0,900) to (1440,902)
[ 23.894] (II) R128(0): Largest offscreen area available: 1440 x 2738
[ 23.894] (II) R128(0): Reserved back buffer from (0,902) to (1440,1802)
[ 23.894] (II) R128(0): Reserved depth buffer from (0,1802) to (1440,2703)
[ 23.894] (II) R128(0): Reserved depth span from (0,2702) offset 0xed7b00
[ 23.894] (II) R128(0): Reserved 12288 kb for textures at offset 0x13fec00
[ 23.894] (II) Loading sub module "xaa"
[ 23.894] (II) LoadModule: "xaa"
[ 23.895] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 23.923] (II) Module xaa: vendor="X.Org Foundation"
[ 23.923] compiled for 1.12.4, module version = 1.2.1
[ 23.923] ABI class: X.Org Video Driver, version 12.1
[ 23.924] (II) R128(0): Using XFree86 Acceleration Architecture (XAA)
[ 23.924] Screen to screen bit blits
[ 23.924] Solid filled rectangles
[ 23.924] 8x8 mono pattern filled rectangles
[ 23.924] Indirect CPU to Screen color expansion
[ 23.924] Solid Lines
[ 23.924] Dashed Lines
[ 23.924] Setting up tile and stipple cache:
[ 23.924] 32 128x128 slots
[ 23.924] 11 256x256 slots
[ 23.926] (II) R128(0): Acceleration enabled
[ 23.926] (==) R128(0): Backing store disabled
[ 23.926] (==) R128(0): Silken mouse enabled
[ 23.927] (II) R128(0): Using hardware cursor (scanline 10812)
[ 23.927] (II) R128(0): Largest offscreen area available: 1440 x 935
[ 23.927] (==) R128(0): DPMS enabled
[ 23.927] (II) R128(0): [DRI] installation complete
[ 24.009] (EE) R128(0): R128DRICloseScreen: CCE stop -22
[ 24.013] (II) R128(0): [drm] removed 1 reserved context for kernel
[ 24.013] (II) R128(0): [drm] unmapping 8192 bytes of SAREA 0xe081d000 at 0xb70b4000
[ 24.014] (II) R128(0): [drm] Closed DRM master.
[ 24.014] (WW) R128(0): Direct rendering disabled
[ 24.014] (==) RandR enabled
[ 24.014] (II) Initializing built-in extension Generic Event Extension
[ 24.014] (II) Initializing built-in extension SHAPE
[ 24.014] (II) Initializing built-in extension MIT-SHM
[ 24.014] (II) Initializing built-in extension XInputExtension
[ 24.014] (II) Initializing built-in extension XTEST
[ 24.014] (II) Initializing built-in extension BIG-REQUESTS
[ 24.014] (II) Initializing built-in extension SYNC
[ 24.014] (II) Initializing built-in extension XKEYBOARD
[ 24.014] (II) Initializing built-in extension XC-MISC
[ 24.014] (II) Initializing built-in extension SECURITY
[ 24.014] (II) Initializing built-in extension XINERAMA
[ 24.014] (II) Initializing built-in extension XFIXES
[ 24.014] (II) Initializing built-in extension RENDER
[ 24.014] (II) Initializing built-in extension RANDR
[ 24.014] (II) Initializing built-in extension COMPOSITE
[ 24.014] (II) Initializing built-in extension DAMAGE
[ 24.014] (II) SELinux: Disabled on system
[ 24.045] (II) AIGLX: Screen 0 is not DRI2 capable
[ 24.045] (II) AIGLX: Screen 0 is not DRI capable
[ 24.792] (II) AIGLX: Loaded and initialized swrast
[ 24.792] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE idle -9
[ 24.966] (EE) R128(0): Idle timed out, resetting engine...
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE stop -9
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE start -9
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE idle -9
[ 24.966] (EE) R128(0): Idle timed out, resetting engine...
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE stop -9
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE start -9
[ 24.966] (EE) R128(0): R128CCEWaitForIdle: CCE idle -9
[these 4 lines repeated indefinitely]
--- End Message ---