Bug#627604: [libpixman-1-0] x server crash
Package: libpixman-1-0
Version: 0.21.8-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
i was reading a pdf in poppler and had this crash:
Backtrace:
[ 4671.023] 0: /usr/bin/X11/X (xorg_backtrace+0x37) [0x80ed307]
[ 4671.023] 1: /usr/bin/X11/X (0x8048000+0x6356a) [0x80ab56a]
[ 4671.023] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xf77cc410]
[ 4671.023] 3: /usr/lib/libpixman-1.so.0 (0xf768d000+0x5fbb0) [0xf76ecbb0]
[ 4671.023] 4: /usr/lib/libpixman-1.so.0 (0xf768d000+0x60f41) [0xf76edf41]
[ 4671.023] 5: /usr/lib/libpixman-1.so.0
(pixman_image_composite32+0x3cc) [0xf76cbd6c]
[ 4671.023] 6: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x8c)
[0xf76cbfec]
[ 4671.023] 7: /usr/lib/xorg/modules/libfb.so (fbComposite+0x257)
[0xf72a6c77]
[ 4671.023] Bus error at address 0xe1a0e62c
[ 4671.023]
Fatal server error:
[ 4671.023] Caught signal 7 (Bus error). Server aborting
[ 4671.023]
X is:
xserver-xorg-core 2:1.10.1-2
xserver-xorg-core-dbg 2:1.10.1-2
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.39+
Debian Release: wheezy/sid
500 unstable pkg-fso.alioth.debian.org
500 unstable mi.mirror.garr.it
500 unstable ftp.de.debian.org
1 experimental ftp.de.debian.org
--- Package information. ---
Depends (Version) | Installed
======================-+-===========
libc6 (>= 2.3) | 2.13-4
Package's Recommends field is empty.
Package's Suggests field is empty.
[ 44.911]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 44.911] X Protocol Version 11, Revision 0
[ 44.911] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[ 44.911] Current Operating System: Linux montag 2.6.39+ #203 SMP PREEMPT Fri May 20 09:40:51 CEST 2011 x86_64
[ 44.911] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39+ root=UUID=770e4e60-f57b-4299-a18d-ed558a68d750 ro quiet
[ 44.911] Build Date: 01 May 2011 10:14:44AM
[ 44.911] xorg-server 2:1.10.1-2 (Julien Cristau <jcristau@debian.org>)
[ 44.911] Current version of pixman: 0.21.8
[ 44.911] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 44.911] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 44.911] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 22 14:54:31 2011
[ 44.995] (==) Using config file: "/etc/X11/xorg.conf"
[ 44.995] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 45.028] (==) No Layout section. Using the first Screen section.
[ 45.028] (**) |-->Screen "Default Screen" (0)
[ 45.028] (**) | |-->Monitor "Configured Monitor"
[ 45.028] (==) No device specified for screen "Default Screen".
Using the first device section listed.
[ 45.028] (**) | |-->Device "Configured Video Device"
[ 45.028] (==) Automatically adding devices
[ 45.028] (==) Automatically enabling devices
[ 45.061] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 45.061] Entry deleted from font path.
[ 45.096] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 45.096] Entry deleted from font path.
[ 45.125] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 45.125] Entry deleted from font path.
[ 45.197] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 45.197] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45.197] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45.197] (II) Loader magic: 0x8232ac0
[ 45.197] (II) Module ABI versions:
[ 45.197] X.Org ANSI C Emulation: 0.4
[ 45.197] X.Org Video Driver: 10.0
[ 45.197] X.Org XInput driver : 12.2
[ 45.197] X.Org Server Extension : 5.0
[ 45.198] (--) PCI:*(0:0:2:0) 8086:2a42:144d:c045 rev 7, Mem @ 0xf8000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 45.198] (--) PCI: (0:0:2:1) 8086:2a43:144d:c045 rev 7, Mem @ 0xf8400000/1048576
[ 45.198] (II) Open ACPI successful (/var/run/acpid.socket)
[ 45.198] (II) LoadModule: "extmod"
[ 45.248] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45.256] (II) Module extmod: vendor="X.Org Foundation"
[ 45.256] compiled for 1.10.1, module version = 1.0.0
[ 45.256] Module class: X.Org Server Extension
[ 45.256] ABI class: X.Org Server Extension, version 5.0
[ 45.256] (II) Loading extension SELinux
[ 45.256] (II) Loading extension MIT-SCREEN-SAVER
[ 45.256] (II) Loading extension XFree86-VidModeExtension
[ 45.256] (II) Loading extension XFree86-DGA
[ 45.256] (II) Loading extension DPMS
[ 45.256] (II) Loading extension XVideo
[ 45.256] (II) Loading extension XVideo-MotionCompensation
[ 45.256] (II) Loading extension X-Resource
[ 45.256] (II) LoadModule: "dbe"
[ 45.256] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45.256] (II) Module dbe: vendor="X.Org Foundation"
[ 45.256] compiled for 1.10.1, module version = 1.0.0
[ 45.256] Module class: X.Org Server Extension
[ 45.256] ABI class: X.Org Server Extension, version 5.0
[ 45.257] (II) Loading extension DOUBLE-BUFFER
[ 45.257] (II) LoadModule: "glx"
[ 45.257] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45.395] (II) Module glx: vendor="X.Org Foundation"
[ 45.395] compiled for 1.10.1, module version = 1.0.0
[ 45.395] ABI class: X.Org Server Extension, version 5.0
[ 45.395] (==) AIGLX enabled
[ 45.395] (II) Loading extension GLX
[ 45.396] (II) LoadModule: "record"
[ 45.396] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45.410] (II) Module record: vendor="X.Org Foundation"
[ 45.410] compiled for 1.10.1, module version = 1.13.0
[ 45.410] Module class: X.Org Server Extension
[ 45.410] ABI class: X.Org Server Extension, version 5.0
[ 45.410] (II) Loading extension RECORD
[ 45.410] (II) LoadModule: "dri"
[ 45.411] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45.512] (II) Module dri: vendor="X.Org Foundation"
[ 45.512] compiled for 1.10.1, module version = 1.0.0
[ 45.512] ABI class: X.Org Server Extension, version 5.0
[ 45.512] (II) Loading extension XFree86-DRI
[ 45.512] (II) LoadModule: "dri2"
[ 45.513] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45.592] (II) Module dri2: vendor="X.Org Foundation"
[ 45.592] compiled for 1.10.1, module version = 1.2.0
[ 45.592] ABI class: X.Org Server Extension, version 5.0
[ 45.592] (II) Loading extension DRI2
[ 45.592] (==) Matched intel as autoconfigured driver 0
[ 45.592] (==) Matched vesa as autoconfigured driver 1
[ 45.592] (==) Matched fbdev as autoconfigured driver 2
[ 45.592] (==) Assigned the driver to the xf86ConfigLayout
[ 45.592] (II) LoadModule: "intel"
[ 45.592] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 45.770] (II) Module intel: vendor="X.Org Foundation"
[ 45.770] compiled for 1.10.1, module version = 2.15.0
[ 45.770] Module class: X.Org Video Driver
[ 45.770] ABI class: X.Org Video Driver, version 10.0
[ 45.770] (II) LoadModule: "vesa"
[ 45.790] (WW) Warning, couldn't open module vesa
[ 45.790] (II) UnloadModule: "vesa"
[ 45.790] (II) Unloading vesa
[ 45.790] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 45.790] (II) LoadModule: "fbdev"
[ 45.790] (WW) Warning, couldn't open module fbdev
[ 45.790] (II) UnloadModule: "fbdev"
[ 45.790] (II) Unloading fbdev
[ 45.790] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45.801] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 45.802] (++) using VT number 7
[ 45.808] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 45.808] drmOpenDevice: node name is /dev/dri/card0
[ 45.808] drmOpenDevice: open result is 9, (OK)
[ 45.808] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 45.808] drmOpenDevice: node name is /dev/dri/card0
[ 45.808] drmOpenDevice: open result is 9, (OK)
[ 45.808] drmOpenByBusid: drmOpenMinor returns 9
[ 45.808] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 45.808] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
[ 45.808] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45.808] (==) intel(0): RGB weight 888
[ 45.808] (==) intel(0): Default visual is TrueColor
[ 45.808] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 45.808] (--) intel(0): Chipset: "GM45"
[ 45.808] (**) intel(0): Relaxed fencing enabled
[ 45.808] (**) intel(0): Framebuffer tiled
[ 45.808] (**) intel(0): Pixmaps tiled
[ 45.808] (**) intel(0): 3D buffers tiled
[ 45.808] (**) intel(0): SwapBuffers wait enabled
[ 45.808] (==) intel(0): video overlay key set to 0x101fe
[ 45.809] (II) intel(0): Output LVDS1 using monitor section Configured Monitor
[ 45.811] (II) intel(0): found backlight control interface /sys/class/backlight/samsung
[ 45.832] (II) intel(0): Output VGA1 has no monitor section
[ 45.852] (II) intel(0): Output HDMI1 has no monitor section
[ 45.852] (II) intel(0): Output DP1 has no monitor section
[ 46.492] (II) intel(0): Output HDMI2 has no monitor section
[ 46.492] (II) intel(0): Output DP2 has no monitor section
[ 46.493] (II) intel(0): Output DP3 has no monitor section
[ 46.740] (II) intel(0): Output TV1 has no monitor section
[ 46.740] (II) intel(0): EDID for output LVDS1
[ 46.740] (II) intel(0): Manufacturer: SEC Model: 4542 Serial#: 0
[ 46.740] (II) intel(0): Year: 2008 Week: 0
[ 46.740] (II) intel(0): EDID Version: 1.3
[ 46.740] (II) intel(0): Digital Display Input
[ 46.740] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19
[ 46.740] (II) intel(0): Gamma: 2.20
[ 46.740] (II) intel(0): No DPMS capabilities specified
[ 46.740] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 46.740] (II) intel(0): First detailed timing is preferred mode
[ 46.740] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 46.740] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 46.740] (II) intel(0): Manufacturer's mask: 0
[ 46.740] (II) intel(0): Supported detailed timing:
[ 46.740] (II) intel(0): clock: 68.9 MHz Image Size: 303 x 190 mm
[ 46.740] (II) intel(0): h_active: 1280 h_sync: 1292 h_sync_end 1356 h_blank_end 1408 h_border: 0
[ 46.740] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 806 v_blanking: 816 v_border: 0
[ 46.740] (II) intel(0): Unknown vendor-specific block f
[ 46.740] (II) intel(0): SAMSUNG
[ 46.740] (II) intel(0): LTN141AT07000
[ 46.741] (II) intel(0): EDID (in hex):
[ 46.741] (II) intel(0): 00ffffffffffff004ca3424500000000
[ 46.741] (II) intel(0): 00120103801e13780a87f594574f8c27
[ 46.741] (II) intel(0): 27505400000001010101010101010101
[ 46.741] (II) intel(0): 010101010101ee1a0080502010300c40
[ 46.741] (II) intel(0): 33002fbe100000190000000f00000000
[ 46.741] (II) intel(0): 00000000002387026401000000fe0053
[ 46.741] (II) intel(0): 414d53554e470a2020202020000000fe
[ 46.741] (II) intel(0): 004c544e313431415430373030300042
[ 46.741] (II) intel(0): EDID vendor "SEC", prod id 17730
[ 46.741] (II) intel(0): Printing DDC gathered Modelines:
[ 46.741] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
[ 46.770] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 46.770] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 46.770] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 46.770] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 46.770] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 46.771] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 46.771] (II) intel(0): Printing probed modes for output LVDS1
[ 46.771] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
[ 46.771] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 46.771] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 46.771] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 46.771] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 46.792] (II) intel(0): EDID for output VGA1
[ 46.812] (II) intel(0): EDID for output HDMI1
[ 46.812] (II) intel(0): EDID for output DP1
[ 47.452] (II) intel(0): EDID for output HDMI2
[ 47.452] (II) intel(0): EDID for output DP2
[ 47.453] (II) intel(0): EDID for output DP3
[ 47.716] (II) intel(0): EDID for output TV1
[ 47.716] (II) intel(0): Output LVDS1 connected
[ 47.716] (II) intel(0): Output VGA1 disconnected
[ 47.716] (II) intel(0): Output HDMI1 disconnected
[ 47.716] (II) intel(0): Output DP1 disconnected
[ 47.716] (II) intel(0): Output HDMI2 disconnected
[ 47.716] (II) intel(0): Output DP2 disconnected
[ 47.716] (II) intel(0): Output DP3 disconnected
[ 47.716] (II) intel(0): Output TV1 disconnected
[ 47.716] (II) intel(0): Using exact sizes for initial modes
[ 47.716] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 47.716] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 47.716] (II) intel(0): Kernel page flipping support detected, enabling
[ 47.716] (**) intel(0): Display dimensions: (300, 190) mm
[ 47.716] (**) intel(0): DPI set to (108, 106)
[ 47.716] (II) Loading sub module "fb"
[ 47.716] (II) LoadModule: "fb"
[ 47.716] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 47.744] (II) Module fb: vendor="X.Org Foundation"
[ 47.744] compiled for 1.10.1, module version = 1.0.0
[ 47.744] ABI class: X.Org ANSI C Emulation, version 0.4
[ 47.744] (II) Loading sub module "dri2"
[ 47.744] (II) LoadModule: "dri2"
[ 47.744] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 47.744] (II) Module dri2: vendor="X.Org Foundation"
[ 47.744] compiled for 1.10.1, module version = 1.2.0
[ 47.744] ABI class: X.Org Server Extension, version 5.0
[ 47.744] (==) Depth 24 pixmap format is 32 bpp
[ 47.744] (II) intel(0): [DRI2] Setup complete
[ 47.744] (II) intel(0): [DRI2] DRI driver: i965
[ 47.744] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 47.817] (II) UXA(0): Driver registered support for the following operations:
[ 47.817] (II) solid
[ 47.817] (II) copy
[ 47.817] (II) composite (RENDER acceleration)
[ 47.817] (II) put_image
[ 47.817] (II) get_image
[ 47.817] (==) intel(0): Backing store disabled
[ 47.817] (==) intel(0): Silken mouse enabled
[ 47.826] (II) intel(0): Initializing HW Cursor
[ 47.840] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 47.855] (==) intel(0): DPMS enabled
[ 47.855] (II) intel(0): Set up textured video
[ 47.856] (II) intel(0): direct rendering: DRI2 Enabled
[ 47.856] (==) intel(0): hotplug detection: "enabled"
[ 47.856] (--) RandR disabled
[ 47.856] (II) Initializing built-in extension Generic Event Extension
[ 47.856] (II) Initializing built-in extension SHAPE
[ 47.856] (II) Initializing built-in extension MIT-SHM
[ 47.856] (II) Initializing built-in extension XInputExtension
[ 47.856] (II) Initializing built-in extension XTEST
[ 47.856] (II) Initializing built-in extension BIG-REQUESTS
[ 47.856] (II) Initializing built-in extension SYNC
[ 47.856] (II) Initializing built-in extension XKEYBOARD
[ 47.856] (II) Initializing built-in extension XC-MISC
[ 47.856] (II) Initializing built-in extension SECURITY
[ 47.856] (II) Initializing built-in extension XINERAMA
[ 47.856] (II) Initializing built-in extension XFIXES
[ 47.856] (II) Initializing built-in extension RENDER
[ 47.856] (II) Initializing built-in extension RANDR
[ 47.856] (II) Initializing built-in extension COMPOSITE
[ 47.856] (II) Initializing built-in extension DAMAGE
[ 47.856] (II) SELinux: Disabled on system
[ 48.010] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 48.010] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 48.010] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 48.010] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 48.010] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 48.011] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
[ 48.011] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 48.011] (II) intel(0): Setting screen physical size to 338 x 211
[ 48.651] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 48.651] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 48.651] (II) LoadModule: "evdev"
[ 48.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.660] (II) Module evdev: vendor="X.Org Foundation"
[ 48.661] compiled for 1.10.1, module version = 2.6.0
[ 48.661] Module class: X.Org XInput Driver
[ 48.661] ABI class: X.Org XInput driver, version 12.2
[ 48.661] (II) Using input driver 'evdev' for 'Power Button'
[ 48.661] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.661] (**) Power Button: always reports core events
[ 48.661] (**) Power Button: Device: "/dev/input/event4"
[ 48.684] (--) Power Button: Found keys
[ 48.684] (II) Power Button: Configuring as keyboard
[ 48.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 48.684] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 48.684] (**) Option "xkb_rules" "evdev"
[ 48.684] (**) Option "xkb_model" "pc105"
[ 48.684] (**) Option "xkb_layout" "it"
[ 48.684] (**) Option "xkb_options" "lv3:ralt_switch"
[ 48.741] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 48.741] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 48.741] (II) Using input driver 'evdev' for 'Video Bus'
[ 48.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.741] (**) Video Bus: always reports core events
[ 48.741] (**) Video Bus: Device: "/dev/input/event7"
[ 48.752] (--) Video Bus: Found keys
[ 48.752] (II) Video Bus: Configuring as keyboard
[ 48.752] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7/event7"
[ 48.752] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 48.752] (**) Option "xkb_rules" "evdev"
[ 48.752] (**) Option "xkb_model" "pc105"
[ 48.752] (**) Option "xkb_layout" "it"
[ 48.752] (**) Option "xkb_options" "lv3:ralt_switch"
[ 48.762] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 48.762] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 48.762] (II) Using input driver 'evdev' for 'Power Button'
[ 48.762] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.763] (**) Power Button: always reports core events
[ 48.763] (**) Power Button: Device: "/dev/input/event2"
[ 48.772] (--) Power Button: Found keys
[ 48.772] (II) Power Button: Configuring as keyboard
[ 48.772] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 48.772] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 48.772] (**) Option "xkb_rules" "evdev"
[ 48.772] (**) Option "xkb_model" "pc105"
[ 48.772] (**) Option "xkb_layout" "it"
[ 48.772] (**) Option "xkb_options" "lv3:ralt_switch"
[ 48.773] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 48.774] (II) No input driver/identifier specified (ignoring)
[ 48.774] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 48.774] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 48.774] (II) Using input driver 'evdev' for 'Sleep Button'
[ 48.774] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.775] (**) Sleep Button: always reports core events
[ 48.775] (**) Sleep Button: Device: "/dev/input/event3"
[ 48.804] (--) Sleep Button: Found keys
[ 48.804] (II) Sleep Button: Configuring as keyboard
[ 48.804] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 48.804] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 48.804] (**) Option "xkb_rules" "evdev"
[ 48.804] (**) Option "xkb_model" "pc105"
[ 48.804] (**) Option "xkb_layout" "it"
[ 48.804] (**) Option "xkb_options" "lv3:ralt_switch"
[ 48.812] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event9)
[ 48.812] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 48.813] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 48.813] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.813] (**) Logitech USB Laser Mouse: always reports core events
[ 48.813] (**) Logitech USB Laser Mouse: Device: "/dev/input/event9"
[ 48.836] (--) Logitech USB Laser Mouse: Found 3 mouse buttons
[ 48.836] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[ 48.836] (--) Logitech USB Laser Mouse: Found relative axes
[ 48.836] (--) Logitech USB Laser Mouse: Found x and y relative axes
[ 48.836] (II) Logitech USB Laser Mouse: Configuring as mouse
[ 48.836] (II) Logitech USB Laser Mouse: Adding scrollwheel support
[ 48.836] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 48.836] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 48.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input9/event9"
[ 48.836] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE)
[ 48.836] (II) Logitech USB Laser Mouse: initialized for relative axes.
[ 48.836] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 48.836] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 48.836] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 48.837] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 48.837] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1)
[ 48.837] (II) No input driver/identifier specified (ignoring)
[ 48.842] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 48.842] (II) No input driver/identifier specified (ignoring)
[ 48.852] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 48.852] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 48.852] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 48.852] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.852] (**) AT Translated Set 2 keyboard: always reports core events
[ 48.852] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 48.876] (--) AT Translated Set 2 keyboard: Found keys
[ 48.876] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 48.876] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 48.876] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 48.876] (**) Option "xkb_rules" "evdev"
[ 48.876] (**) Option "xkb_model" "pc105"
[ 48.876] (**) Option "xkb_layout" "it"
[ 48.876] (**) Option "xkb_options" "lv3:ralt_switch"
[ 48.878] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 48.878] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 48.878] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 48.878] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.878] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 48.878] (**) SynPS/2 Synaptics TouchPad: Device: "/dev/input/event6"
[ 48.900] (--) SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 48.900] (--) SynPS/2 Synaptics TouchPad: Found absolute axes
[ 48.900] (--) SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 48.900] (--) SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 48.900] (II) SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 48.900] (**) SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 48.900] (**) SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 48.900] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input6/event6"
[ 48.900] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 48.900] (II) SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 48.900] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 48.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 48.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 48.900] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 48.901] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 48.901] (II) No input driver/identifier specified (ignoring)
[ 48.902] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 48.902] (II) No input driver/identifier specified (ignoring)
[ 48.908] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event10)
[ 48.908] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 48.909] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 48.909] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 48.909] (**) ACPI Virtual Keyboard Device: always reports core events
[ 48.909] (**) ACPI Virtual Keyboard Device: Device: "/dev/input/event10"
[ 48.932] (--) ACPI Virtual Keyboard Device: Found keys
[ 48.932] (II) ACPI Virtual Keyboard Device: Configuring as keyboard
[ 48.932] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event10"
[ 48.932] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
[ 48.932] (**) Option "xkb_rules" "evdev"
[ 48.932] (**) Option "xkb_model" "pc105"
[ 48.932] (**) Option "xkb_layout" "it"
[ 48.932] (**) Option "xkb_options" "lv3:ralt_switch"
[ 71.256] (II) intel(0): EDID vendor "SEC", prod id 17730
[ 71.256] (II) intel(0): Printing DDC gathered Modelines:
[ 71.256] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1292 1356 1408 800 803 806 816 -hsync -vsync (49.0 kHz)
[ 4671.002]
Backtrace:
[ 4671.023] 0: /usr/bin/X11/X (xorg_backtrace+0x37) [0x80ed307]
[ 4671.023] 1: /usr/bin/X11/X (0x8048000+0x6356a) [0x80ab56a]
[ 4671.023] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xf77cc410]
[ 4671.023] 3: /usr/lib/libpixman-1.so.0 (0xf768d000+0x5fbb0) [0xf76ecbb0]
[ 4671.023] 4: /usr/lib/libpixman-1.so.0 (0xf768d000+0x60f41) [0xf76edf41]
[ 4671.023] 5: /usr/lib/libpixman-1.so.0 (pixman_image_composite32+0x3cc) [0xf76cbd6c]
[ 4671.023] 6: /usr/lib/libpixman-1.so.0 (pixman_image_composite+0x8c) [0xf76cbfec]
[ 4671.023] 7: /usr/lib/xorg/modules/libfb.so (fbComposite+0x257) [0xf72a6c77]
[ 4671.023] Bus error at address 0xe1a0e62c
[ 4671.023]
Fatal server error:
[ 4671.023] Caught signal 7 (Bus error). Server aborting
[ 4671.023]
[ 4671.023]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4671.023] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4671.023]
[ 4671.080] (II) Power Button: Close
[ 4671.080] (II) UnloadModule: "evdev"
[ 4671.080] (II) Unloading evdev
[ 4671.144] (II) Video Bus: Close
[ 4671.144] (II) UnloadModule: "evdev"
[ 4671.144] (II) Unloading evdev
[ 4671.208] (II) Power Button: Close
[ 4671.208] (II) UnloadModule: "evdev"
[ 4671.208] (II) Unloading evdev
[ 4671.272] (II) Sleep Button: Close
[ 4671.272] (II) UnloadModule: "evdev"
[ 4671.275] (II) Unloading evdev
[ 4671.354] (II) Logitech USB Laser Mouse: Close
[ 4671.354] (II) UnloadModule: "evdev"
[ 4671.354] (II) Unloading evdev
[ 4671.416] (II) AT Translated Set 2 keyboard: Close
[ 4671.416] (II) UnloadModule: "evdev"
[ 4671.416] (II) Unloading evdev
[ 4671.498] (II) SynPS/2 Synaptics TouchPad: Close
[ 4671.498] (II) UnloadModule: "evdev"
[ 4671.498] (II) Unloading evdev
[ 4671.576] (II) ACPI Virtual Keyboard Device: Close
[ 4671.576] (II) UnloadModule: "evdev"
[ 4671.576] (II) Unloading evdev
[ 4671.577] (II) AIGLX: Suspending AIGLX clients for VT switch
Reply to: