[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#532995: xserver-xorg-input-synaptics: lost 1 & 3 finger tap on 12" PowerBook G4



Package: xserver-xorg-input-synaptics
Version: 1.1.2-1
Severity: important

I upgrade from lenny to sid x11 in mid may and have upgraded to most
recent pacakge today  6/12/09.  The ability to do a 1 or 3 fingered
tap has disappeared.  This is not a configuration issue, I have
explict TapButton? in my xorg.conf:
        Option          "TapButton1"            "1"
        Option          "TapButton2"            "2"
        Option          "TabButton3"            "3"
I also tried adding similar options to hal without any effect (in the
file /usr/share/hal/fdi/policy/20thirdparty/11-x11-synaptics.fdi). 

I can set two-fingered tap to any button I wish, but I just can't get
a click even out of 1 or 3 fingered tap.  Please help!  At the very
least I need buttons 2 and 3!

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 2009-02-07 11:13 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1919580 2009-05-14 11:50 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
0000:00:10.0 VGA compatible controller: nVidia Corporation NV34M [GeForce FX Go5200] (rev a1)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 3074 2009-06-07 02:39 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
        Identifier      "Generic Keyboard"
	Driver		"kbd"
#This is from my old config
#        Driver          "keyboard"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
#The installer put this.  Produces less warnings than macintosh so going with it
	Option		"XkbModel"	"pc104"
#        Option          "XkbModel"      "macintosh"
        Option          "XkbLayout"     "us,il"
        Option          "XkbVariant"    ",lyx"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/input/event6"
        Option          "Protocol"              "auto-dev"
        #Option          "SHMConfig"             "on"
        Option          "LeftEdge"              "0"
        Option          "RightEdge"             "0"
        Option          "TopEdge"               "0"
        Option          "BottomEdge"            "0"
        Option          "EdgeMotionUseAlways"   "0"
        Option          "MinSpeed"              ".4"
        Option          "MaxSpeed"              "1.5"
        Option          "AccelFactor"           "0.02"
        Option          "VertScrollDelta"       "30"
        Option          "HorizScrollDelta"       "30"
	Option		"HorizTwoFingerScroll"	"true"
	Option		"VertTwoFingerScroll"	"true"
        Option          "TapButton1"            "1"
        Option          "TapButton2"            "2"
        Option          "TabButton3"            "3"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
        Identifier      "Generic Video Card"
#        Driver          "nv"
#        Option          "Dualhead" "true"
        Driver          "nouveau"
        Option          "XAANoOffscreenPixmaps" "true"
        BusID           "PCI:0:16:0"
#	Option		"UseFBDev"		"false"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
#	SubSection	"Display"
#		Virtual 2880 2224
#	EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
EndSection




Xorg X server log files on system:
-rw-r--r-- 1 root root  2343 2009-02-08 19:33 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 36157 2009-06-13 00:56 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-powerpc64 ppc64 Debian
Current Operating System: Linux cavybook 2.6.29-2-powerpc #1 Sun May 17 13:11:04 CEST 2009 ppc
Build Date: 14 May 2009  04:38:52PM
xorg-server 2:1.6.1.901-2 (buildd@) 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 13 00:56:28 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x1a80
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:16:0) nVidia Corporation NV34M [GeForce FX Go5200] rev 161, Mem @ 0x91000000/16777216, 0xa0000000/134217728, BIOS @ 0x????????/131072
(II) No APM support in BIOS or kernel
(II) System resource ranges:
	[0] -1	2	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	2	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	2	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	2	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	1	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	2	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	2	0x00000000 - 0x00000000 (0x1) IX[B]
	[14] -1	1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	1	0x00000000 - 0x00000000 (0x1) IX[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 0.0.10
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.1.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) NOUVEAU driver 
(II) NOUVEAU driver for NVIDIA chipset families :
	RIVA TNT    (NV04)
	RIVA TNT2   (NV05)
	GeForce 256 (NV10)
	GeForce 2   (NV11, NV15)
	GeForce 4MX (NV17, NV18)
	GeForce 3   (NV20)
	GeForce 4Ti (NV25, NV28)
	GeForce FX  (NV3x)
	GeForce 6   (NV4x)
	GeForce 7   (G7x)
	GeForce 8   (G8x)
(II) Primary Device is: PCI 00@00:10:0
(II) resource ranges after probing:
	[0] -1	2	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	2	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	2	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	2	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	1	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	2	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	2	0x00000000 - 0x00000000 (0x1) IX[B]
	[14] -1	1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	1	0x00000000 - 0x00000000 (0x1) IX[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(--) NOUVEAU(0): Chipset: "NVIDIA NV34"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] loaded kernel module for "nouveau" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.12
(--) NOUVEAU(0): [drm] kernel modesetting not available
(II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(==) NOUVEAU(0): Randr1.2 support enabled
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xA0000000
(--) NOUVEAU(0): MMIO registers at 0x91000000
(II) NOUVEAU(0): Initial CRTC_OWNER is 3
(II) NOUVEAU(0): Attempting to load BIOS image from PROM
(!!) NOUVEAU(0): ... BIOS signature not found
(II) NOUVEAU(0): Attempting to load BIOS image from PRAMIN
(!!) NOUVEAU(0): ... BIOS checksum invalid
(II) NOUVEAU(0): Attempting to load BIOS image from PCI ROM
(!!) NOUVEAU(0): ... BIOS signature not found
(II) NOUVEAU(0): Using BIOS image from PRAMIN
(II) NOUVEAU(0): BMP BIOS found
(II) NOUVEAU(0): BMP version 5.38
(II) NOUVEAU(0): Bios version 04.34.20.18
(II) NOUVEAU(0): Found Display Configuration Block version 2.2
(!!) NOUVEAU(0): Raw DCB entry 0: 04000223 00000004
(!!) NOUVEAU(0): Raw DCB entry 1: 01110112 11700000
(!!) NOUVEAU(0): Raw DCB entry 2: 02010110 117088b8
(!!) NOUVEAU(0): Raw DCB entry 3: 02010111 11700703
(II) NOUVEAU(0): Loading NV17 power sequencing microcode
(--) NOUVEAU(0): Parsing VBIOS init table 0 at offset 0x02FA
(--) NOUVEAU(0): Parsing VBIOS init table 1 at offset 0x0547
(--) NOUVEAU(0): Parsing VBIOS init table 2 at offset 0x068D
(--) NOUVEAU(0): Parsing VBIOS init table 3 at offset 0x082D
(--) NOUVEAU(0): Parsing VBIOS init table 4 at offset 0x084A
(--) NOUVEAU(0): Parsing VBIOS init table 5 at offset 0x0874
(--) NOUVEAU(0): Parsing VBIOS init table 6 at offset 0x09C9
(II) NOUVEAU(0): Output LVDS-0 using monitor section Configured Monitor
(II) NOUVEAU(0): I2C bus "LVDS-0" initialized.
(II) NOUVEAU(0): Output DVI-I-0 has no monitor section
(II) NOUVEAU(0): I2C bus "DVI-I-0" initialized.
(II) NOUVEAU(0): I2C device "LVDS-0:E-EDID segment register" registered at address 0x60.
(II) NOUVEAU(0): I2C device "LVDS-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): EDID for output LVDS-0
(II) NOUVEAU(0): Manufacturer: APP  Model: 9c2a  Serial#: 0
(II) NOUVEAU(0): Year: 2002  Week: 0
(II) NOUVEAU(0): EDID Version: 1.1
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 24  vert.: 18
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): No DPMS capabilities specified
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): GTF timings supported
(II) NOUVEAU(0): redX: 0.560 redY: 0.334   greenX: 0.308 greenY: 0.536
(II) NOUVEAU(0): blueX: 0.155 blueY: 0.133   whiteX: 0.312 whiteY: 0.328
(II) NOUVEAU(0): Supported VESA Video Modes:
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported additional Video Mode:
(II) NOUVEAU(0): clock: 65.0 MHz   Image Size:  245 x 184 mm
(II) NOUVEAU(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) NOUVEAU(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(WW) NOUVEAU(0): Unknown vendor-specific block 1
(II) NOUVEAU(0):  LP121X04-C2
(II) NOUVEAU(0): Monitor name: COLOR LCD
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 	00ffffffffffff0006102a9c00000000
(II) NOUVEAU(0): 	000c0101801812780a6dc08f554e8927
(II) NOUVEAU(0): 	22505400080001010101010101010101
(II) NOUVEAU(0): 	01010101010164190040410026301888
(II) NOUVEAU(0): 	3600f5b8000000180000000100061020
(II) NOUVEAU(0): 	00000000000000000a20000000fe004c
(II) NOUVEAU(0): 	503132315830342d43320a20000000fc
(II) NOUVEAU(0): 	00434f4c4f52204c43440a2020200025
(II) NOUVEAU(0): EDID vendor "APP", prod id 39978
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): EDID vendor "APP", prod id 39978
(II) NOUVEAU(0): Not using default mode "640x350" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x400" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "720x400" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1280x960" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1280x960" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1280x1024" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1792x1344" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1856x1392" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1920x1440" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "832x624" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) NOUVEAU(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) NOUVEAU(0): Not using default mode "1400x1050" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1440x900" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1600x1024" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1680x1050" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1680x1050" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1920x1080" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1920x1200" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "2048x1536" (hsync out of range)
(II) NOUVEAU(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) NOUVEAU(0): Printing probed modes for output LVDS-0
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): I2C device "DVI-I-0:E-EDID segment register" registered at address 0x60.
(II) NOUVEAU(0): I2C device "DVI-I-0:ddc2" registered at address 0xA0.
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Output LVDS-0 connected
(II) NOUVEAU(0): Output DVI-I-0 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output LVDS-0 using initial mode 1024x768
(--) NOUVEAU(0): VideoRAM: 65536 kBytes
(==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NOUVEAU(0): Virtual size is 1024x1024 (pitch 1024)
(**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (240, 180) mm
(**) NOUVEAU(0): DPI set to (108, 144)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 2.4.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 1.6.1.901, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	2	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	2	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	2	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	2	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	1	0xffffffff - 0xffffffff (0x1) MX[B]
	[5] -1	1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[6] -1	1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[7] -1	1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[8] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[9] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[10] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[11] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[12] -1	2	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	2	0x00000000 - 0x00000000 (0x1) IX[B]
	[14] -1	1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	1	0x00000000 - 0x00000000 (0x1) IX[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) NOUVEAU(0): Allocated 32MiB VRAM for framebuffer + offscreen pixmaps, at offset 0x0
(II) NOUVEAU(0): GART: PCI DMA - using 3840KiB
(II) NOUVEAU(0): GART: Allocated 3MiB as a scratch buffer
(II) NOUVEAU(0): [drm] Using the DRM lock SAREA also for drawables.
(II) NOUVEAU(0): [drm] framebuffer handle = 0xa0000000
(II) NOUVEAU(0): [drm] added 1 reserved context for kernel
(II) NOUVEAU(0): X context handle = 0x1
(II) NOUVEAU(0): [drm] installed DRM signal handler
(II) NOUVEAU(0): Opened GPU channel 1
(II) NOUVEAU(0): Saving crtcs
(II) NOUVEAU(0): Saving encoders
(II) EXA(0): Offscreen pixmap area of 29360128 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): [DRI] installation complete
(II) NOUVEAU(0): Xv: Composite is enabled, enabling overlay with smart blitter fallback
(II) NOUVEAU(0): Xv: Randr12 is enabled, using overlay with smart blitter fallback and automatic CRTC switching
(II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
(II) NOUVEAU(0): [XvMC] Extension initialized.
(II) NOUVEAU(0): NVEnterVT is called.
(II) NOUVEAU(0): Saving crtcs
(II) NOUVEAU(0): Saving encoders
(II) NOUVEAU(0): Setting dpms mode 3 on lvds encoder (output 0)
(II) NOUVEAU(0): Calling LVDS script 1:
(II) NOUVEAU(0): 0x09F2: Parsing digital output script table
(II) NOUVEAU(0): Calling LVDS script 6:
(II) NOUVEAU(0): 0x0A6B: Parsing digital output script table
(II) NOUVEAU(0): Setting dpms mode 3 on tmds encoder (output 1)
(II) NOUVEAU(0): Setting dpms mode 3 on vga encoder (output 2)
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 0
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 1
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 1
(II) NOUVEAU(0): CTRC mode on CRTC 1:
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Output mode on CRTC 1:
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): vpll: n 77 m 4 log2p 3
(II) NOUVEAU(0): nv_output_mode_set called for encoder 0
(II) NOUVEAU(0): Calling LVDS script 2:
(II) NOUVEAU(0): 0x09F3: Parsing digital output script table
(II) NOUVEAU(0): Setting dpms mode 0 on CRTC 1
(II) NOUVEAU(0): Setting dpms mode 0 on lvds encoder (output 0)
(II) NOUVEAU(0): Calling LVDS script 5:
(II) NOUVEAU(0): 0x0A54: Parsing digital output script table
(II) NOUVEAU(0): Output LVDS-0 is running on CRTC 1 using output C
(II) NOUVEAU(0): Setting dpms mode 3 on CRTC 0
(II) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) NOUVEAU(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(EE) AIGLX error: dlopen of /usr/lib/dri/nouveau_dri.so failed (/usr/lib/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 245 x 184
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event6"
(II) Synaptics Touchpad: x-axis range 0 - 959
(II) Synaptics Touchpad: y-axis range 0 - 644
(II) Synaptics Touchpad: pressure range 0 - 300
(II) Synaptics Touchpad: finger width range 0 - 0
(II) Synaptics Touchpad: buttons: left double triple
(**) Option "LeftEdge" "0"
(**) Option "RightEdge" "0"
(**) Option "TopEdge" "0"
(**) Option "BottomEdge" "0"
(**) Option "VertScrollDelta" "30"
(**) Option "HorizScrollDelta" "30"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "EdgeMotionUseAlways" "0"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "MinSpeed" ".4"
(**) Option "MaxSpeed" "1.5"
(**) Option "AccelFactor" "0.02"
(--) Synaptics Touchpad: touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(**) Synaptics Touchpad: (accel) keeping acceleration scheme 1
(**) Synaptics Touchpad: (accel) filter chain progression: 2.00
(**) Synaptics Touchpad: (accel) filter stage 0: 20.00 ms
(**) Synaptics Touchpad: (accel) set acceleration profile 0
(--) Synaptics Touchpad: touchpad found
(II) config/hal: Adding input device ADB Powerbook buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 2.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) ADB Powerbook buttons: always reports core events
(**) ADB Powerbook buttons: Device: "/dev/input/event2"
(II) ADB Powerbook buttons: Found keys
(II) ADB Powerbook buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ADB Powerbook buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device ADB keyboard
(**) ADB keyboard: always reports core events
(**) ADB keyboard: Device: "/dev/input/event1"
(II) ADB keyboard: Found keys
(II) ADB keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "ADB keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device HID 05ac:1000
(**) HID 05ac:1000: always reports core events
(**) HID 05ac:1000: Device: "/dev/input/event4"
(II) HID 05ac:1000: Found keys
(II) HID 05ac:1000: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device HID 05ac:1000
(**) HID 05ac:1000: always reports core events
(**) HID 05ac:1000: Device: "/dev/input/event5"
(II) HID 05ac:1000: Found 5 mouse buttons
(II) HID 05ac:1000: Found x and y relative axes
(II) HID 05ac:1000: Configuring as mouse
(**) HID 05ac:1000: YAxisMapping: buttons 4 and 5
(**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE)
(**) HID 05ac:1000: (accel) keeping acceleration scheme 1
(**) HID 05ac:1000: (accel) filter chain progression: 2.00
(**) HID 05ac:1000: (accel) filter stage 0: 20.00 ms
(**) HID 05ac:1000: (accel) set acceleration profile 0
(II) config/hal: Adding input device appletouch
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event6"
(II) appletouch: x-axis range 0 - 959
(II) appletouch: y-axis range 0 - 644
(II) appletouch: pressure range 0 - 300
(II) appletouch: finger width range 0 - 0
(II) appletouch: buttons: left double triple
(--) appletouch: touchpad found
(**) appletouch: always reports core events
(II) XINPUT: Adding extended input device "appletouch" (type: TOUCHPAD)
(**) appletouch: (accel) keeping acceleration scheme 1
(**) appletouch: (accel) filter chain progression: 2.00
(**) appletouch: (accel) filter stage 0: 20.00 ms
(**) appletouch: (accel) set acceleration profile 0
(WW) appletouch can't grab event device, errno=16
(--) appletouch: touchpad found
(II) NOUVEAU(0): Not using default mode "640x350" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x400" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "720x400" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "640x480" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "800x600" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1280x960" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1280x1024" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "832x624" (vrefresh out of range)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1152x864" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1360x768" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1360x768" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1440x900" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1600x1024" (width too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1920x1080" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) NOUVEAU(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) NOUVEAU(0): Printing probed modes for output LVDS-0
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output DVI-I-0
HAL Information (lshal):

Dumping 96 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.addons = {'hald-addon-cpufreq'} (string list)
  info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
  info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
  info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
  info.capabilities = {'cpufreq_control'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  openfirmware.compatible = {'PowerBook6,8', 'MacRISC3', 'Power Macintosh', ''} (string list)
  openfirmware.model = 'PowerBook6,8'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = false  (bool)
  power_management.can_suspend_hybrid = false  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.quirk.dpms_on = true  (bool)
  power_management.quirk.dpms_suspend = true  (bool)
  power_management.quirk.vbe_post = true  (bool)
  power_management.quirk.vbemode_restore = true  (bool)
  power_management.quirk.vbestate_restore = true  (bool)
  power_management.quirk.vga_mode_3 = true  (bool)
  power_management.type = 'pmu'  (string)
  system.formfactor = 'laptop'  (string)
  system.hardware.primary_video.product = 809  (0x329)  (int)
  system.hardware.primary_video.vendor = 4318  (0x10de)  (int)
  system.kernel.machine = 'ppc'  (string)
  system.kernel.name = 'Linux'  (string)
  system.kernel.version = '2.6.29-2-powerpc'  (string)
  system.kernel.version.major = 2  (0x2)  (int)
  system.kernel.version.micro = 29  (0x1d)  (int)
  system.kernel.version.minor = 6  (0x6)  (int)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'
  button.has_state = false  (bool)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'b43-phy0'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_3'  (string)
  input.device = '/dev/input/event7'  (string)
  input.product = 'b43-phy0'  (string)
  linux.device_file = '/dev/input/event7'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input7/event7'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ADB Powerbook buttons'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'  (string)
  input.device = '/dev/input/event2'  (string)
  input.product = 'ADB Powerbook buttons'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'base'  (string)
  linux.device_file = '/dev/input/event2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input2/event2'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.callouts.add = {'debian-setup-keyboard'} (string list)
  info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ADB keyboard'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'  (string)
  input.device = '/dev/input/event1'  (string)
  input.product = 'ADB keyboard'  (string)
  input.x11_driver = 'evdev'  (string)
  input.xkb.layout = 'us'  (string)
  input.xkb.model = 'pc105'  (string)
  input.xkb.rules = 'base'  (string)
  linux.device_file = '/dev/input/event1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input1/event1'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
  access_control.file = '/dev/snd/timer'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/timer'  (string)
  alsa.type = 'timer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Timer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'  (string)
  linux.device_file = '/dev/snd/timer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/timer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  button.type = 'lid'  (string)
  info.addons.singleton = {'hald-addon-input'} (string list)
  info.capabilities = {'input', 'button', 'input.switch'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'PMU'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'  (string)
  input.device = '/dev/input/event3'  (string)
  input.product = 'PMU'  (string)
  linux.device_file = '/dev/input/event3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input3/event3'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
  access_control.file = '/dev/sequencer2'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'  (string)
  linux.device_file = '/dev/sequencer2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2'  (string)
  oss.device_file = '/dev/sequencer2'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
  access_control.file = '/dev/sequencer'  (string)
  access_control.type = 'sound'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'oss', 'access_control'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'OSS Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'  (string)
  linux.device_file = '/dev/sequencer'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/sequencer'  (string)
  oss.device_file = '/dev/sequencer'  (string)
  oss.type = 'sequencer'  (string)

udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
  access_control.file = '/dev/snd/seq'  (string)
  access_control.type = 'sound'  (string)
  alsa.device_file = '/dev/snd/seq'  (string)
  alsa.type = 'sequencer'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'alsa', 'access_control'} (string list)
  info.category = 'alsa'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'ALSA Sequencer Device'  (string)
  info.subsystem = 'sound'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'  (string)
  linux.device_file = '/dev/snd/seq'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'sound'  (string)
  linux.sysfs_path = '/sys/devices/virtual/sound/seq'  (string)

udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
  access_control.file = '/dev/input/event0'  (string)
  access_control.type = 'mouse'  (string)
  info.callouts.add = {'hal-acl-tool --add-device'} (string list)
  info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
  info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
  info.category = 'input'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Macintosh mouse button emulation'  (string)
  info.subsystem = 'input'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'  (string)
  input.device = '/dev/input/event0'  (string)
  input.product = 'Macintosh mouse button emulation'  (string)
  input.x11_driver = 'evdev'  (string)
  linux.device_file = '/dev/input/event0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'input'  (string)
  linux.sysfs_path = '/sys/devices/virtual/input/input0/event0'  (string)

udi = '/org/freedesktop/Hal/devices/pmu_lid'
  button.has_state = true  (bool)
  button.state.value = false  (bool)
  button.type = 'lid'  (string)
  info.addons = {'hald-addon-pmu'} (string list)
  info.capabilities = {'button'} (string list)
  info.category = 'button'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Lid Switch'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pmu_lid'  (string)
  linux.hotplug_type = 6  (0x6)  (int)
  linux.pmu_path = '/proc/pmu/info'  (string)
  linux.pmu_type = 2  (0x2)  (int)

udi = '/org/freedesktop/Hal/devices/pmu_battery_0_0'
  battery.charge_level.current = 3616  (0xe20)  (int)
  battery.charge_level.design = 3652  (0xe44)  (int)
  battery.charge_level.last_full = 3652  (0xe44)  (int)
  battery.charge_level.percentage = 99  (0x63)  (int)
  battery.charge_level.rate = 0  (0x0)  (int)
  battery.is_rechargeable = true  (bool)
  battery.present = true  (bool)
  battery.rechargeable.is_charging = false  (bool)
  battery.rechargeable.is_discharging = false  (bool)
  battery.technology = 'unknown'  (string)
  battery.type = 'primary'  (string)
  info.capabilities = {'battery'} (string list)
  info.category = 'battery'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Battery Bay'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pmu_battery_0_0'  (string)
  linux.hotplug_type = 6  (0x6)  (int)
  linux.pmu_path = '/proc/pmu/battery_0'  (string)
  linux.pmu_type = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/pmu_info_1'
  ac_adapter.present = true  (bool)
  info.capabilities = {'ac_adapter'} (string list)
  info.category = 'ac_adapter'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'AC Adapter'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pmu_info_1'  (string)
  linux.hotplug_type = 6  (0x6)  (int)
  linux.pmu_path = '/proc/pmu/info'  (string)
  linux.pmu_type = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
  info.capabilities = {'net', 'net.loopback'} (string list)
  info.category = 'net.loopback'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Loopback device Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/virtual/net/lo'  (string)
  net.address = '00:00:00:00:00:00'  (string)
  net.arp_proto_hw_id = 772  (0x304)  (int)
  net.interface = 'lo'  (string)
  net.linux.ifindex = 1  (0x1)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)

udi = '/org/freedesktop/Hal/devices/leds_pmu_front_led'
  info.capabilities = {'leds'} (string list)
  info.category = 'leds'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.subsystem = 'leds'  (string)
  info.udi = '/org/freedesktop/Hal/devices/leds_pmu_front_led'  (string)
  leds.device_name = 'pmu-front-led'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'leds'  (string)
  linux.sysfs_path = '/sys/devices/virtual/leds/pmu-front-led'  (string)

udi = '/org/freedesktop/Hal/devices/computer_backlight'
  info.addons = {'hald-addon-generic-backlight'} (string list)
  info.capabilities = {'laptop_panel'} (string list)
  info.category = 'laptop_panel'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.LaptopPanel'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Generic Backlight Device'  (string)
  info.subsystem = 'backlight'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer_backlight'  (string)
  laptop_panel.access_method = 'general'  (string)
  laptop_panel.num_levels = 128  (0x80)  (int)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'backlight'  (string)
  linux.sysfs_path = '/sys/devices/virtual/backlight/nvidiabl0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_serial8250'
  info.linux.driver = 'serial8250'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (serial8250)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_serial8250'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/serial8250'  (string)
  platform.id = 'serial8250'  (string)

udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (regulatory.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/regulatory.0'  (string)
  platform.id = 'regulatory.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_ppc_rtc_0'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (ppc-rtc.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_ppc_rtc_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/ppc-rtc.0'  (string)
  platform.id = 'ppc-rtc.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_3'
  info.linux.driver = 'i2c-powermac'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i2c-powermac.3)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_3'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i2c-powermac.3'  (string)
  platform.id = 'i2c-powermac.3'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_2'
  info.linux.driver = 'i2c-powermac'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i2c-powermac.2)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i2c-powermac.2'  (string)
  platform.id = 'i2c-powermac.2'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_1'
  info.linux.driver = 'i2c-powermac'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i2c-powermac.1)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_1'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i2c-powermac.1'  (string)
  platform.id = 'i2c-powermac.1'  (string)

udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_0'
  info.linux.driver = 'i2c-powermac'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (i2c-powermac.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_i2c_powermac_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/i2c-powermac.0'  (string)
  platform.id = 'i2c-powermac.0'  (string)

udi = '/org/freedesktop/Hal/devices/platform_adb_0'
  info.linux.driver = 'adb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Platform Device (adb.0)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/platform_adb_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'platform'  (string)
  linux.sysfs_path = '/sys/devices/platform/adb.0'  (string)
  platform.id = 'adb.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_106b_32'
  info.linux.driver = 'gem'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'UniNorth 2 GMAC (Sun GEM)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_106b_32'  (string)
  info.vendor = 'Apple Computer Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0f.0'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0f.0'  (string)
  pci.product = 'UniNorth 2 GMAC (Sun GEM)'  (string)
  pci.product_id = 50  (0x32)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Apple Computer Inc.'  (string)
  pci.vendor_id = 4203  (0x106b)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_11_24_e7_08_f2'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_106b_32'  (string)
  info.product = 'Networking Interface'  (string)
  info.subsystem = 'net'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_11_24_e7_08_f2'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'net'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0f.0/net/eth0'  (string)
  net.80203.mac_address = 73633564914  (0x1124e708f2)  (uint64)
  net.address = '00:11:24:e7:08:f2'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.interface = 'eth0'  (string)
  net.linux.ifindex = 2  (0x2)  (int)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_106b_32'  (string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)

udi = '/org/freedesktop/Hal/devices/pci_106b_31'
  info.linux.driver = 'firewire_ohci'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'UniNorth 2 FireWire'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_106b_31'  (string)
  info.vendor = 'Apple Computer Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0e.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0e.0'  (string)
  pci.product = 'UniNorth 2 FireWire'  (string)
  pci.product_id = 49  (0x31)  (int)
  pci.subsys_product = 'iBook G4 2004'  (string)
  pci.subsys_product_id = 22545  (0x5811)  (int)
  pci.subsys_vendor = 'Apple Computer Inc.'  (string)
  pci.subsys_vendor_id = 4203  (0x106b)  (int)
  pci.vendor = 'Apple Computer Inc.'  (string)
  pci.vendor_id = 4203  (0x106b)  (int)

udi = '/org/freedesktop/Hal/devices/ieee1394_guid1124fffee708f2'
  ieee1394.device = '/dev/fw0'  (string)
  ieee1394.guid = 4825756515895538  (0x1124fffee708f2)  (uint64)
  ieee1394.product = 'Juju'  (string)
  ieee1394.product_id = 1  (0x1)  (int)
  ieee1394.vendor = 'Linux Firewire'  (string)
  ieee1394.vendor_id = 13634846  (0xd00d1e)  (int)
  info.capabilities = {'ieee1394'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_106b_31'  (string)
  info.subsystem = 'ieee1394'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid1124fffee708f2'  (string)
  linux.device_file = '/dev/fw0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'firewire'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0e.0/fw0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_106b_3b'
  info.linux.driver = 'ide-pmac'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'UniNorth/Intrepid ATA/100'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_106b_3b'  (string)
  info.vendor = 'Apple Computer Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0'  (string)
  pci.device_class = 255  (0xff)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0'  (string)
  pci.product = 'UniNorth/Intrepid ATA/100'  (string)
  pci.product_id = 59  (0x3b)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Apple Computer Inc.'  (string)
  pci.vendor_id = 4203  (0x106b)  (int)

udi = '/org/freedesktop/Hal/devices/pci_106b_3b_ide_0_0'
  ide.channel = 0  (0x0)  (int)
  ide.host = 0  (0x0)  (int)
  info.linux.driver = 'ide-gd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_106b_3b'  (string)
  info.product = 'IDE device (master)'  (string)
  info.subsystem = 'ide'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_106b_3b_ide_0_0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'ide'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'
  block.device = '/dev/hda'  (string)
  block.is_volume = false  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 0  (0x0)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_106b_3b_ide_0_0'  (string)
  info.product = 'ST9160821A'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'pci'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_version = '3.ALE'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = 'ST9160821A'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
  storage.partitioning_scheme = 'apm'  (string)
  storage.removable = false  (bool)
  storage.removable.media_available = true  (bool)
  storage.removable.media_size = 160041885696  (0x25433d6000)  (uint64)
  storage.requires_eject = false  (bool)
  storage.serial = '5MACWYJ2'  (string)
  storage.size = 160041885696  (0x25433d6000)  (uint64)
  storage.vendor = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part8_size_262144'
  block.device = '/dev/hda8'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 8  (0x8)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part8_size_262144'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda8'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 512  (0x200)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Patch Partition'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 8  (0x8)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 671744  (0xa4000)  (uint64)
  volume.partition.type = 'Apple_Patches'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 262144  (0x40000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part7_size_262144'
  block.device = '/dev/hda7'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 7  (0x7)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part7_size_262144'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda7'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 512  (0x200)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Macintosh'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 7  (0x7)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 409600  (0x64000)  (uint64)
  volume.partition.type = 'Apple_Driver_IOKit'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 262144  (0x40000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part6_size_262144'
  block.device = '/dev/hda6'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 6  (0x6)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part6_size_262144'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda6'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 512  (0x200)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Macintosh'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 6  (0x6)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 147456  (0x24000)  (uint64)
  volume.partition.type = 'Apple_FWDriver'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 262144  (0x40000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part5_size_28672'
  block.device = '/dev/hda5'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 5  (0x5)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part5_size_28672'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda5'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 56  (0x38)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Macintosh'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 5  (0x5)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 118784  (0x1d000)  (uint64)
  volume.partition.type = 'Apple_Driver_ATA'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 28672  (0x7000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part4_size_28672'
  block.device = '/dev/hda4'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 4  (0x4)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_28672'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda4'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 56  (0x38)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Macintosh'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 4  (0x4)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 90112  (0x16000)  (uint64)
  volume.partition.type = 'Apple_Driver_ATA'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 28672  (0x7000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part3_size_28672'
  block.device = '/dev/hda3'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 3  (0x3)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part3_size_28672'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda3'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 56  (0x38)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Macintosh'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 3  (0x3)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 61440  (0xf000)  (uint64)
  volume.partition.type = 'Apple_Driver43'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 28672  (0x7000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_28672'
  block.device = '/dev/hda2'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 2  (0x2)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_28672'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda2'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 56  (0x38)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Macintosh'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 32768  (0x8000)  (uint64)
  volume.partition.type = 'Apple_Driver43'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 28672  (0x7000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part15_size_8192'
  block.device = '/dev/hda15'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 15  (0xf)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part15_size_8192'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda15'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 16  (0x10)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = 'Extra'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 15  (0xf)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 160041877504  (0x25433d4000)  (uint64)
  volume.partition.type = 'Apple_Free'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 8192  (0x2000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part14_size_15153224704'
  block.device = '/dev/hda14'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 14  (0xe)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part14_size_15153224704'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda14'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 29596142  (0x1c399ee)  (uint64)
  volume.partition.flags = {} (string list)
  volume.partition.label = 'Extra'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 14  (0xe)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 65001935872  (0xf226ad400)  (uint64)
  volume.partition.type = 'Apple_Free'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 15153224704  (0x38733dc00)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_part1_size_32256'
  block.device = '/dev/hda1'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 1  (0x1)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_32256'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda1'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = ''  (string)
  volume.fsusage = ''  (string)
  volume.fsversion = ''  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 63  (0x3f)  (uint64)
  volume.partition.flags = {'allocated'} (string list)
  volume.partition.label = 'Apple'  (string)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 1  (0x1)  (int)
  volume.partition.scheme = 'apm'  (string)
  volume.partition.start = 512  (0x200)  (uint64)
  volume.partition.type = 'Apple_partition_map'  (string)
  volume.partition.uuid = ''  (string)
  volume.size = 32256  (0x7e00)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_label_bootstrap'
  block.device = '/dev/hda9'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 9  (0x9)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'bootstrap'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_label_bootstrap'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda9'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'hfs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = ''  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'bootstrap'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'gid=', 'uid=', 'force'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 1954  (0x7a2)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 9  (0x9)  (int)
  volume.partition.start = 933888  (0xe4000)  (uint64)
  volume.size = 1000448  (0xf4400)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_015fee6e_1695_4e9e_b5e6_8cb117b57eb6'
  block.device = '/dev/hda13'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 13  (0xd)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_015fee6e_1695_4e9e_b5e6_8cb117b57eb6'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda13'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/home'  (string)
  volume.num_blocks = 58593751  (0x37e11d7)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 13  (0xd)  (int)
  volume.partition.start = 35001935360  (0x826472600)  (uint64)
  volume.size = 30000000512  (0x6fc23ae00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '015fee6e-1695-4e9e-b5e6-8cb117b57eb6'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part12_size_5000000512'
  block.device = '/dev/hda12'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 12  (0xc)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume (swap)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part12_size_5000000512'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda12'  (string)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'swap'  (string)
  volume.fsusage = 'other'  (string)
  volume.fsversion = '2'  (string)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount_point = ''  (string)
  volume.num_blocks = 9765626  (0x9502fa)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 12  (0xc)  (int)
  volume.partition.start = 30001934848  (0x6fc413200)  (uint64)
  volume.size = 5000000512  (0x12a05f400)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_b900db8f_b476_4dab_b1a0_d5f87ca62676'
  block.device = '/dev/hda11'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 11  (0xb)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Volume (ext3)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_b900db8f_b476_4dab_b1a0_d5f87ca62676'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda11'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'ext3'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '1.0'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 58593751  (0x37e11d7)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 11  (0xb)  (int)
  volume.partition.start = 1934336  (0x1d8400)  (uint64)
  volume.size = 30000000512  (0x6fc23ae00)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = 'b900db8f-b476-4dab-b1a0-d5f87ca62676'  (string)

udi = '/org/freedesktop/Hal/devices/volume_uuid_095640ECAF1EC965'
  block.device = '/dev/hda10'  (string)
  block.is_volume = true  (bool)
  block.major = 3  (0x3)  (int)
  block.minor = 10  (0xa)  (int)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.capabilities = {'volume', 'block'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5MACWYJ2'  (string)
  info.product = 'Slash'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_095640ECAF1EC965'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0d.0/ide0/0.0/block/hda/hda10'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
  volume.block_size = 512  (0x200)  (int)
  volume.fstype = 'hfsplus'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = ''  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = 'Slash'  (string)
  volume.linux.is_device_mapper = false  (bool)
  volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'force'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 156028744  (0x94ccf48)  (uint64)
  volume.partition.media_size = 160041885696  (0x25433d6000)  (uint64)
  volume.partition.number = 10  (0xa)  (int)
  volume.partition.start = 80155160576  (0x12a99eb000)  (uint64)
  volume.size = 79886716928  (0x12999e9000)  (uint64)
  volume.unmount.valid_options = {'lazy'} (string list)
  volume.uuid = '095640ECAF1EC965'  (string)

udi = '/org/freedesktop/Hal/devices/pci_106b_36'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'UniNorth 2 Internal PCI'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_106b_36'  (string)
  info.vendor = 'Apple Computer Inc.'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0b.0'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0002:20/0002:20:0b.0'  (string)
  pci.product = 'UniNorth 2 Internal PCI'  (string)
  pci.product_id = 54  (0x36)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Apple Computer Inc.'  (string)
  pci.vendor_id = 4203  (0x106b)  (int)

udi = '/org/freedesktop/Hal/devices/pci_1033_e0'
  info.linux.driver = 'ehci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'USB 2.0'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1033_e0'  (string)
  info.vendor = 'NEC Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 32  (0x20)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2'  (string)
  pci.product = 'USB 2.0'  (string)
  pci.product_id = 224  (0xe0)  (int)
  pci.subsys_product_id = 224  (0xe0)  (int)
  pci.subsys_vendor = 'NEC Corporation'  (string)
  pci.subsys_vendor_id = 4147  (0x1033)  (int)
  pci.vendor = 'NEC Corporation'  (string)
  pci.vendor_id = 4147  (0x1033)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1033_e0'  (string)
  info.product = '2.0 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2/usb4'  (string)
  usb_device.bus_number = 4  (0x4)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2/usb4'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 5  (0x5)  (int)
  usb_device.product = '2.0 root hub'  (string)
  usb_device.product_id = 2  (0x2)  (int)
  usb_device.serial = '0001:10:1b.2'  (string)
  usb_device.speed = 480.0 (480) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/004/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2/usb4/usb_device/usbdev4.1'  (string)
  usbraw.device = '/dev/bus/usb/004/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0001_10_1b_2_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2/usb4/4-0:1.0'  (string)
  usb.bus_number = 4  (0x4)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.2/usb4/4-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 5  (0x5)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 2  (0x2)  (int)
  usb.serial = '0001:10:1b.2'  (string)
  usb.speed = 480.0 (480) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 2.0 (2) (double)

udi = '/org/freedesktop/Hal/devices/pci_1033_35_0'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'USB'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1033_35_0'  (string)
  info.vendor = 'NEC Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1'  (string)
  pci.product = 'USB'  (string)
  pci.product_id = 53  (0x35)  (int)
  pci.subsys_product = 'Hama USB 2.0 CardBus'  (string)
  pci.subsys_product_id = 53  (0x35)  (int)
  pci.subsys_vendor = 'NEC Corporation'  (string)
  pci.subsys_vendor_id = 4147  (0x1033)  (int)
  pci.vendor = 'NEC Corporation'  (string)
  pci.vendor_id = 4147  (0x1033)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1033_35_0'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1/usb3'  (string)
  usb_device.bus_number = 3  (0x3)  (int)
  usb_device.can_wake_up = true  (bool)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 518  (0x206)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.linux.device_number = 1  (0x1)  (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1/usb3'  (string)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 2  (0x2)  (int)
  usb_device.product = '1.1 root hub'  (string)
  usb_device.product_id = 1  (0x1)  (int)
  usb_device.serial = '0001:10:1b.1'  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.vendor = 'Linux Foundation'  (string)
  usb_device.vendor_id = 7531  (0x1d6b)  (int)
  usb_device.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1_usbraw'
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1'  (string)
  info.product = 'USB Raw Device Access'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1_usbraw'  (string)
  linux.device_file = '/dev/bus/usb/003/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb_device'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1/usb3/usb_device/usbdev3.1'  (string)
  usbraw.device = '/dev/bus/usb/003/001'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1_if0'
  info.linux.driver = 'hub'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1'  (string)
  info.product = 'USB Hub Interface'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_1_if0'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1/usb3/3-0:1.0'  (string)
  usb.bus_number = 3  (0x3)  (int)
  usb.can_wake_up = true  (bool)
  usb.configuration_value = 1  (0x1)  (int)
  usb.device_class = 9  (0x9)  (int)
  usb.device_protocol = 0  (0x0)  (int)
  usb.device_revision_bcd = 518  (0x206)  (int)
  usb.device_subclass = 0  (0x0)  (int)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb.is_self_powered = true  (bool)
  usb.linux.device_number = 1  (0x1)  (int)
  usb.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.1/usb3/3-0:1.0'  (string)
  usb.max_power = 0  (0x0)  (int)
  usb.num_configurations = 1  (0x1)  (int)
  usb.num_interfaces = 1  (0x1)  (int)
  usb.num_ports = 2  (0x2)  (int)
  usb.product = 'USB Hub Interface'  (string)
  usb.product_id = 1  (0x1)  (int)
  usb.serial = '0001:10:1b.1'  (string)
  usb.speed = 12.0 (12) (double)
  usb.vendor = 'Linux Foundation'  (string)
  usb.vendor_id = 7531  (0x1d6b)  (int)
  usb.version = 1.1 (1.1) (double)

udi = '/org/freedesktop/Hal/devices/pci_1033_35'
  info.linux.driver = 'ohci_hcd'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'USB'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_1033_35'  (string)
  info.vendor = 'NEC Corporation'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'pci'  (string)
  linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.0'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 16  (0x10)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.linux.sysfs_path = '/sys/devices/pci0001:10/0001:10:1b.0'  (string)
  pci.product = 'USB'  (string)
  pci.product_id = 53  (0x35)  (int)
  pci.subsys_product = 'Hama USB 2.0 CardBus'  (string)
  pci.subsys_product_id = 53  (0x35)  (int)
  pci.subsys_vendor = 'NEC Corporation'  (string)
  pci.subsys_vendor_id = 4147  (0x1033)  (int)
  pci.vendor = 'NEC Corporation'  (string)
  pci.vendor_id = 4147  (0x1033)  (int)

udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_0'
  info.linux.driver = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_1033_35'  (string)
  info.product = '1.1 root hub'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0001_10_1b_0'  (string)
  info.vendor = 'Linux Foundation'  (string)
  linux.device_file = '/dev/bus/usb/002/001'  (string)
  linux.hotplug_type = 2  (0x2)  (int)
  linux.subsystem = 'usb'  (st



Reply to: