Bug#532170: xserver-xorg-core: Screen wakes from DPMS sleep
Package: xserver-xorg-core
Version: 2:1.6.1.901-2
Severity: normal
Hello
I was wondering why I never see my screen in the off mode so I put
"xscreensaver-command -lock ; xset dpms force off" instead of just the
"sxcreensaver-command -lock" as my screen lock function.
As expected the screen slowly blanks and turns off when this function is
activated.
However, after a minute or so the screen turns back on.
I have no mice attached.
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2008-01-14 21:54 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1875600 2009-05-14 18:48 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 2997 2009-05-05 21:15 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerFlags"
Option "HandleSpecialKeys" "Always"
Option "AllowDeactivateGrabs" "on"
Option "AllowClesedownGrabs" "on"
#Option "AutoAddDevices" "off"
EndSection
Section "ServerLayout"
Identifier "Defualt"
Screen "Default Screen"
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
#InputDevice "BambooPen"
InputDevice "BambooExtra"
InputDevice "BambooRubber"
InputDevice "BambooPad"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "BambooPen"
Option "Rotate" "CW"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "SendCoreEvents"
Option "type" "stylus"
Option "USB" "on"
#Option "Suppress" "0"
Option "Mode" "Absolute"
Option "TPCButton" "on"
Option "BottomX" "7380"
EndSection
Section "InputDevice"
Identifier "BambooExtra"
Option "Rotate" "CW"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "SendCoreEvents"
Option "type" "stylus"
Option "USB" "on"
#Option "Suppress" "0"
Option "Mode" "Absolute"
Option "TPCButton" "off"
Option "TopX" "7381"
Option "BottomX" "14760"
EndSection
Section "InputDevice"
Identifier "BambooRubber"
Driver "wacom"
Option "Button1" "3"
Option "Button3" "1"
Option "Device" "/dev/input/wacom"
Option "SendCoreEvents"
Option "type" "Eraser"
Option "USB" "on"
#Option "Suppress" "0"
Option "Mode" "Relative"
Option "RSpeed" "0.5"
#Option "KeepShape" "on"
Option "TPCButton" "on"
Option "Threshold" "1"
Option "BottomX" "7380"
Option "Rotate" "CW"
EndSection
Section "InputDevice"
Identifier "BambooPad"
Option "SendCoreEvents" #not recommended but buttons would not work otherwise
Option "Rotate" "CW"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "type" "Pad"
Option "USB" "on"
#Option "Suppress" "0"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
#Option "AccelMethod" "XAA"
Option "AccelMethod" "UXA"
Option "XvPreferOverlay" "on"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
SubSection "Display"
Depth 24
Virtual 2048 2048
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 2626 2009-05-05 01:16 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 737647 2009-06-07 10:41 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-1-vserver-amd64 x86_64 Debian
Current Operating System: Linux heretic 2.6.29-1-amd64 #1 SMP Fri Apr 17 10:12:36 UTC 2009 x86_64
Build Date: 15 April 2009 12:08:18PM
xorg-server 2:1.6.1-1 (buildd@excelsior.roeckx.be)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 14 11:47:54 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Defualt"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "BambooExtra"
(**) |-->Input Device "BambooRubber"
(**) |-->Input Device "BambooPad"
(**) Option "HandleSpecialKeys" "Always"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Always handling special keys in DDX
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0xd40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xcfd00000/524288, 0xd0000000/268435456, 0xcfd80000/262144, I/O @ 0x00008800/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "AccelMethod" "UXA"
(**) intel(0): Option "XvPreferOverlay" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xCFD00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(**) intel(0): Using UXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Resizable framebuffer: available (1 4)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (340, 280) mm
(**) intel(0): DPI set to (152, 185)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 746752 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2987004 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 271
(II) intel(0): Allocate new frame buffer 1280x1024 stride 2048
(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
(II) intel(0): New front buffer at 0x800000
(**) Option "SendCoreEvents"
(**) BambooExtra: always reports core events
(**) BambooExtra device is /dev/input/wacom
(**) BambooExtra is in absolute mode
(**) WACOM: Rotation is set to CW
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) BambooExtra: reading USB link
(**) Option "TopX" "7381"
(**) BambooExtra: top x = 7381
(**) Option "BottomX" "14760"
(**) BambooExtra: bottom x = 14760
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "BambooExtra" (type: Wacom Stylus)
(**) Option "Device" "/dev/input/wacom"
BambooExtra Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=7381 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) BambooRubber: always reports core events
(**) BambooRubber device is /dev/input/wacom
(**) BambooRubber is in relative mode
(**) WACOM: Rotation is set to CW
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) BambooRubber: reading USB link
(**) Option "BottomX" "7380"
(**) BambooRubber: bottom x = 7380
(**) Option "Threshold" "1"
(**) BambooRubber: threshold = 1
(**) BambooRubber: max x set to 14760 by xorg.conf
(**) BambooRubber: max y set to 9225 by xorg.conf
(**) BambooRubber: max z = 511
(**) Option "Button1" "3"
(**) BambooRubber: button1 assigned to 3
(**) Option "Button3" "1"
(**) BambooRubber: button3 assigned to 1
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "BambooRubber" (type: Wacom Eraser)
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=7380 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) BambooPad: always reports core events
(**) BambooPad device is /dev/input/wacom
(**) BambooPad is in relative mode
(**) WACOM: Rotation is set to CW
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) BambooPad: reading USB link
(**) BambooPad: threshold = 1
(**) BambooPad: max x set to 14760 by xorg.conf
(**) BambooPad: max y set to 9225 by xorg.conf
(**) BambooPad: max z = 511
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "BambooPad" (type: Wacom Pad)
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: Wacom Stylus)
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Bamboo pad" (type: Wacom Pad)
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Bamboo cursor" (type: Wacom Cursor)
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo eraser: reading USB link
(**) Wacom Bamboo eraser: threshold = 30
(**) Wacom Bamboo eraser: max x set to 14760 by xorg.conf
(**) Wacom Bamboo eraser: max y set to 9225 by xorg.conf
(**) Wacom Bamboo eraser: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Bamboo eraser" (type: Wacom Eraser)
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) UnloadModule: "wacom"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) APM registered successfully
(II) intel(0): Kernel reported 746752 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2987004 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 271
(EE) XKB: No components provided for device Virtual core keyboard
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
(**) Option "SendCoreEvents"
(**) BambooExtra: always reports core events
(**) BambooExtra device is /dev/input/wacom
(**) BambooExtra is in absolute mode
(**) WACOM: Rotation is set to CW
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) BambooExtra: reading USB link
(**) Option "TopX" "7381"
(**) BambooExtra: top x = 7381
(**) Option "BottomX" "14760"
(**) BambooExtra: bottom x = 14760
(**) Option "TPCButton" "off"
(**) Option "BaudRate" "9600"
(**) Option "Device" "/dev/input/wacom"
BambooExtra Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=7381 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) BambooRubber: always reports core events
(**) BambooRubber device is /dev/input/wacom
(**) BambooRubber is in relative mode
(**) WACOM: Rotation is set to CW
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) BambooRubber: reading USB link
(**) Option "BottomX" "7380"
(**) BambooRubber: bottom x = 7380
(**) Option "Threshold" "1"
(**) BambooRubber: threshold = 1
(**) BambooRubber: max x set to 14760 by xorg.conf
(**) BambooRubber: max y set to 9225 by xorg.conf
(**) BambooRubber: max z = 511
(**) Option "Button1" "3"
(**) BambooRubber: button1 assigned to 3
(**) Option "Button3" "1"
(**) BambooRubber: button3 assigned to 1
(**) Option "BaudRate" "9600"
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=7380 bottom Y=9225 resol X=2540 resol Y=2540
(**) Option "SendCoreEvents"
(**) BambooPad: always reports core events
(**) BambooPad device is /dev/input/wacom
(**) BambooPad is in relative mode
(**) WACOM: Rotation is set to CW
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) BambooPad: reading USB link
(**) BambooPad: threshold = 1
(**) BambooPad: max x set to 14760 by xorg.conf
(**) BambooPad: max y set to 9225 by xorg.conf
(**) BambooPad: max z = 511
(**) Option "BaudRate" "9600"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo eraser: reading USB link
(**) Wacom Bamboo eraser: threshold = 30
(**) Wacom Bamboo eraser: max x set to 14760 by xorg.conf
(**) Wacom Bamboo eraser: max y set to 9225 by xorg.conf
(**) Wacom Bamboo eraser: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "9225"
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "14760"
(==) Wacom device "BambooExtra" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooRubber" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 2
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 3
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 4
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 2
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 3
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 4
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "14760"
(==) Wacom device "BambooExtra" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooRubber" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "14760"
(==) Wacom device "BambooExtra" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooRubber" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 2
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 3
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 4
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
Error reading wacom device : No such device
Error reading wacom device : No such device
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 2
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 3
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 4
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 2
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 3
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 4
(**) Option "Device" "/dev/input/event7"
(EE) xf86OpenSerial: Cannot open device /dev/input/event7
No such file or directory.
Error opening /dev/input/event7 : No such file or directory
[dix] couldn't enable device 6
(**) Option "Device" "/dev/input/event7"
(EE) xf86OpenSerial: Cannot open device /dev/input/event7
No such file or directory.
Error opening /dev/input/event7 : No such file or directory
[dix] couldn't enable device 7
(**) Option "Device" "/dev/input/event7"
(EE) xf86OpenSerial: Cannot open device /dev/input/event7
No such file or directory.
Error opening /dev/input/event7 : No such file or directory
[dix] couldn't enable device 8
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 2
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 3
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
No such file or directory.
Error opening /dev/input/wacom : No such file or directory
[dix] couldn't enable device 4
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "14760"
(==) Wacom device "BambooExtra" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooRubber" top X=5535 top Y=7380 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "TopY" "7381"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "TopY" "7381"
(**) Option "TopY" "7381"
(**) Option "BottomY" "14760"
(**) Option "TopY" "7381"
(**) Option "BottomY" "14760"
(**) Option "TopY" "0"
(**) Option "TopY" "7381"
(**) Option "TopY" "0"
(**) Option "TopY" "7381"
(**) Option "TopY" "0"
(**) Option "TopY" "7381"
(**) Option "TopY" "0"
(**) Option "TopY" "7381"
(**) Option "TopY" "0"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomY" "7380"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: ENC Model: 1789 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 34
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 28
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 75 vid: 20353
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 271 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 37872085
(II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 80 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: M1700
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0015c3891701010101
(II) intel(0): 220f010368221c78eaaea5a6544c9926
(II) intel(0): 145054bfef8081808140814f714f0101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520f1100001e000000ff00333738
(II) intel(0): 37323038350a20202020000000fd0032
(II) intel(0): 4c18500e000a202020202020000000fc
(II) intel(0): 004d313730300a2020202020202000de
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver grabbed event device
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooPad" top X=5535 top Y=0 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomY" "9225"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Wacom Bamboo eraser
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo cursor
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo pad
(II) UnloadModule: "wacom"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "wacom"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "BambooExtra" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(==) Wacom device "BambooRubber" top X=0 top Y=0 bottom X=9225 bottom Y=7380 resol X=2540 resol Y=2540
(**) Option "BottomX" "9225"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=0 bottom X=9225 bottom Y=14760 resol X=2540 resol Y=2540
(II) config/hal: Adding input device Wacom Bamboo eraser
(**) Wacom Bamboo eraser: always reports core events
(**) Wacom Bamboo eraser device is /dev/input/event7
(**) Wacom Bamboo eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo eraser: serial speed 9600
(**) Option "Device" "/dev/input/event7"
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom using pressure threshold of 30 for button 1
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo eraser already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo cursor
(**) Wacom Bamboo cursor: always reports core events
(**) Wacom Bamboo cursor device is /dev/input/event7
(**) Wacom Bamboo cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo cursor: reading USB link
(**) Wacom Bamboo cursor: threshold = 30
(**) Wacom Bamboo cursor: max x set to 14760 by xorg.conf
(**) Wacom Bamboo cursor: max y set to 9225 by xorg.conf
(**) Wacom Bamboo cursor: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo cursor: serial speed 9600
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo cursor already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo pad
(**) Wacom Bamboo pad: always reports core events
(**) Wacom Bamboo pad device is /dev/input/event7
(**) Wacom Bamboo pad is in relative mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo pad: reading USB link
(**) Wacom Bamboo pad: threshold = 30
(**) Wacom Bamboo pad: max x set to 14760 by xorg.conf
(**) Wacom Bamboo pad: max y set to 9225 by xorg.conf
(**) Wacom Bamboo pad: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo pad: serial speed 9600
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo pad already added. Ignoring.
(II) config/hal: Adding input device Wacom Bamboo
(**) Wacom Bamboo: always reports core events
(**) Wacom Bamboo device is /dev/input/event7
(**) Wacom Bamboo is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Bamboo: reading USB link
(**) Wacom Bamboo: threshold = 30
(**) Wacom Bamboo: max x set to 14760 by xorg.conf
(**) Wacom Bamboo: max y set to 9225 by xorg.conf
(**) Wacom Bamboo: max z = 511
(**) Option "BaudRate" "9600"
(**) Wacom Bamboo: serial speed 9600
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(WW) config/hal: device Wacom Bamboo already added. Ignoring.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
BambooExtra Wacom X driver grabbed event device
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooExtra" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "7380"
(**) Option "BottomY" "14760"
(==) Wacom device "BambooRubber" top X=0 top Y=5535 bottom X=7380 bottom Y=14760 resol X=2540 resol Y=2540
(**) Option "BottomX" "14760"
(==) Wacom device "BambooPad" top X=0 top Y=5535 bottom X=14760 bottom Y=14760 resol X=2540 resol Y=2540
Wacom Bamboo eraser Wacom X driver can't grab event device, errno=16
(==) Wacom USB Bamboo tablet speed=9600 (38400) maxX=14760 maxY=9225 maxZ=511 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "Wacom Bamboo eraser" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo cursor" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo pad" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(==) Wacom device "Wacom Bamboo" top X=0 top Y=0 bottom X=14760 bottom Y=9225 resol X=2540 resol Y=2540
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "BottomX" "9225"
(**) Option "BottomY" "7380"
(**) Option "Button0" "0"
(**) Option "Button1" "0"
(**) Option "Button2" "0"
(**) Option "Button3" "0"
HAL Information (lshal):
Dumping 108 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
power_management.acpi.linux.version = '20081204' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = true (bool)
power_management.is_powersave_set = false (bool)
power_management.type = 'acpi' (string)
system.board.product = 'P5L-VM 1394' (string)
system.board.serial = 'MB-1234567890' (string)
system.board.vendor = 'ASUSTeK Computer INC.' (string)
system.board.version = 'Rev 1.xx' (string)
system.chassis.manufacturer = 'Chassis Manufacture' (string)
system.chassis.type = 'Desktop' (string)
system.firmware.release_date = '03/19/2007' (string)
system.firmware.vendor = 'American Megatrends Inc.' (string)
system.firmware.version = '0802' (string)
system.formfactor = 'desktop' (string)
system.hardware.primary_video.product = 10098 (0x2772) (int)
system.hardware.primary_video.vendor = 32902 (0x8086) (int)
system.hardware.product = 'System Product Name' (string)
system.hardware.serial = 'System Serial Number' (string)
system.hardware.uuid = '00AE6408-C217-DC11-8021-001BFC713A8F' (string)
system.hardware.vendor = 'System manufacturer' (string)
system.hardware.version = 'System Version' (string)
system.kernel.machine = 'x86_64' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.29-1-amd64' (string)
system.kernel.version.major = 2 (0x2) (int)
system.kernel.version.micro = 29 (0x1d) (int)
system.kernel.version.minor = 6 (0x6) (int)
udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/timer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/virtual/sound/seq' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1'
access_control.file = '/dev/input/event0' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Intel(R) Celeron(R) CPU 420 @ 1.60GHz' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = true (bool)
processor.number = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
info.capabilities = {'net', 'net.loopback'} (string list)
info.category = 'net.loopback' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Loopback device Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/virtual/net/lo' (string)
net.address = '00:00:00:00:00:00' (string)
net.arp_proto_hw_id = 772 (0x304) (int)
net.interface = 'lo' (string)
net.linux.ifindex = 1 (0x1) (int)
net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event3' (string)
input.product = 'Power Button (CM)' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.capabilities = {'input', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Power Button (FF)' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:10' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_3'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0f' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0e' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0d' (string)
pnp.description = '16550A-compatible COM port' (string)
pnp.id = 'PNP0501' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
access_control.file = '/dev/ttyS0' (string)
access_control.type = 'modem' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'serial', 'access_control'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
info.product = '16550A-compatible COM port' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0' (string)
linux.device_file = '/dev/ttyS0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0d/tty/ttyS0' (string)
serial.device = '/dev/ttyS0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_PNP0501' (string)
serial.port = 0 (0x0) (int)
serial.type = 'platform' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0c' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0f03'
info.linux.driver = 'i8042 aux' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Microsoft PS/2-style Mouse' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f03' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0b' (string)
pnp.description = 'Microsoft PS/2-style Mouse' (string)
pnp.id = 'PNP0f03' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
info.linux.driver = 'i8042 kbd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)' (string)
pnp.id = 'PNP0303' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0103)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.id = 'PNP0103' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
info.linux.driver = 'parport_pc' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ECP printer port' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'ECP printer port' (string)
pnp.id = 'PNP0401' (string)
udi = '/org/freedesktop/Hal/devices/ppdev_parport0'
access_control.file = '/dev/parport0' (string)
access_control.type = 'ppdev' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'ppdev', 'access_control'} (string list)
info.category = 'ppdev' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0401' (string)
info.product = 'Parallel Port Device' (string)
info.subsystem = 'ppdev' (string)
info.udi = '/org/freedesktop/Hal/devices/ppdev_parport0' (string)
linux.device_file = '/dev/parport0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ppdev' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06/ppdev/parport0' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.linux.driver = 'rtc_cmos' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_w83627ehf_656'
info.linux.driver = 'w83627ehf' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (w83627ehf.656)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_w83627ehf_656' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/w83627ehf.656' (string)
platform.id = 'w83627ehf.656' (string)
udi = '/org/freedesktop/Hal/devices/platform_vesafb_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vesafb.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vesafb.0' (string)
platform.id = 'vesafb.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt'
info.linux.driver = 'iTCO_wdt' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (iTCO_wdt)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' (string)
platform.id = 'iTCO_wdt' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.linux.driver = 'atkbd' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'us' (string)
input.xkb.model = 'pc105' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/platform_coretemp_0'
info.linux.driver = 'coretemp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (coretemp.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_coretemp_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/coretemp.0' (string)
platform.id = 'coretemp.0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27da'
info.linux.driver = 'i801_smbus' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) SMBus Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' (string)
pci.product = '82801G (ICH7 Family) SMBus Controller' (string)
pci.product_id = 10202 (0x27da) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c0'
info.linux.driver = 'ata_piix' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801GB/GR/GH (ICH7 Family) SATA IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 143 (0x8f) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' (string)
pci.product = '82801GB/GR/GH (ICH7 Family) SATA IDE Controller' (string)
pci.product_id = 10176 (0x27c0) (int)
pci.subsys_product_id = 9729 (0x2601) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_0'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/scsi_host/host1' (string)
scsi_host.host = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/scsi_host/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'Maxtor 6L200M0' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c0_scsi_host_scsi_device_lun0' (string)
info.product = 'Maxtor 6L200M0' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'BACE' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'Maxtor 6L200M0' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 203928109056 (0x2f7b100000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'SATA_Maxtor_6L200M0_L41STKHG' (string)
storage.size = 203928109056 (0x2f7b100000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_d75adb57_1770_483f_aa62_e6e9006555f2'
block.device = '/dev/sda9' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 9 (0x9) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'heretix-DDR' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_d75adb57_1770_483f_aa62_e6e9006555f2' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'heretix-DDR' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/opt/ddr' (string)
volume.num_blocks = 97659072 (0x5d228c0) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 9 (0x9) (int)
volume.partition.start = 38510793216 (0x8f76c1200) (uint64)
volume.size = 50001444864 (0xba4518000) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'd75adb57-1770-483f-aa62-e6e9006555f2' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_542f5904_b015_4f94_afba_fab029b9277e'
block.device = '/dev/sda8' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 8 (0x8) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'heretix-home' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_542f5904_b015_4f94_afba_fab029b9277e' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'heretix-home' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/home' (string)
volume.num_blocks = 5863662 (0x5978ee) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 8 (0x8) (int)
volume.partition.start = 35508566016 (0x84479b800) (uint64)
volume.size = 3002194944 (0xb2f1dc00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '542f5904-b015-4f94-afba-fab029b9277e' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_ae7d5095_c8b3_4205_af0e_032b0e124ec3'
block.device = '/dev/sda7' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 7 (0x7) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'debian' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ae7d5095_c8b3_4205_af0e_032b0e124ec3' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'debian' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/' (string)
volume.num_blocks = 39070017 (0x2542941) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 7 (0x7) (int)
volume.partition.start = 15504685056 (0x39c26b800) (uint64)
volume.size = 20003848704 (0x4a8528200) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'ae7d5095-c8b3-4205-af0e-032b0e124ec3' (string)
udi = '/org/freedesktop/Hal/devices/volume_part6_size_5000937984'
block.device = '/dev/sda6' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 6 (0x6) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part6_size_5000937984' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 9767457 (0x950a21) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 10503714816 (0x27211f800) (uint64)
volume.size = 5000937984 (0x12a144200) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_label_heretix'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'heretix' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_label_heretix' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'reiserfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.6' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'heretix' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr'} (string list)
volume.mount_point = '/heretix' (string)
volume.num_blocks = 19534977 (0x12a1481) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.start = 501774336 (0x1de87800) (uint64)
volume.size = 10001908224 (0x254290200) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_26847db2_d754_45cd_8180_f65c51bd96b1'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'heretix-scratch' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_26847db2_d754_45cd_8180_f65c51bd96b1' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'heretix-scratch' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/scratch' (string)
volume.num_blocks = 225408015 (0xd6f740f) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.start = 88512238080 (0x149bbd9200) (uint64)
volume.size = 115408903680 (0x1adee81e00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '26847db2-d754-45cd-8180-f65c51bd96b1' (string)
udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 501742080 (0x1de7fa00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_part1_size_501709824'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_Maxtor_6L200M0_L41STKHG' (string)
info.product = 'Volume (swap)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_501709824' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'swap' (string)
volume.fsusage = 'other' (string)
volume.fsversion = '2' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 979902 (0xef3be) (uint64)
volume.partition.media_size = 203928109056 (0x2f7b100000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.size = 501709824 (0x1de77c00) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27df'
info.linux.driver = 'PIIX_IDE' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) IDE Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' (string)
pci.product = '82801G (ICH7 Family) IDE Controller' (string)
pci.product_id = 10207 (0x27df) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27df_ide_0_0'
ide.channel = 0 (0x0) (int)
ide.host = 0 (0x0) (int)
info.linux.driver = 'ide-cdrom' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df' (string)
info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_ide_0_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0' (string)
udi = '/org/freedesktop/Hal/devices/storage_model_Optiarc_DVD_RW_AD_7173A'
access_control.file = '/dev/hda' (string)
access_control.type = 'cdrom' (string)
block.device = '/dev/hda' (string)
block.is_volume = false (bool)
block.major = 3 (0x3) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_Optiarc_DVD_RW_AD_7173A' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_ide_0_0' (string)
info.product = 'Optiarc DVD RW AD-7173A' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_Optiarc_DVD_RW_AD_7173A' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0/block/hda' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrdl = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 8467 (0x2113) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 8467 (0x2113) (int)
storage.cdrom.write_speeds = {'8467', '7056', '5645', '4234', '2822', '1411'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1-01' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = true (bool)
storage.model = 'Optiarc DVD RW AD-7173A' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.media_size = 4166909952 (0xf85e0000) (uint64)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = '' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27b8'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801GB/GR (ICH7 Family) LPC Interface Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b8' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' (string)
pci.product = '82801GB/GR (ICH7 Family) LPC Interface Bridge' (string)
pci.product_id = 10168 (0x27b8) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801 PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' (string)
pci.product = '82801 PCI Bridge' (string)
pci.product_id = 9294 (0x244e) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_1106_3044'
info.linux.driver = 'firewire_ohci' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string)
info.product = 'VT6306 Fire II IEEE 1394 OHCI Link Layer Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1106_3044' (string)
info.vendor = 'VIA Technologies, Inc.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0' (string)
pci.product = 'VT6306 Fire II IEEE 1394 OHCI Link Layer Controller' (string)
pci.product_id = 12356 (0x3044) (int)
pci.subsys_product_id = 33278 (0x81fe) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'VIA Technologies, Inc.' (string)
pci.vendor_id = 4358 (0x1106) (int)
udi = '/org/freedesktop/Hal/devices/ieee1394_guid11d80000e22f81'
ieee1394.device = '/dev/fw0' (string)
ieee1394.guid = 5022569130504065 (0x11d80000e22f81) (uint64)
ieee1394.product = 'Juju' (string)
ieee1394.product_id = 1 (0x1) (int)
ieee1394.vendor = 'Linux Firewire' (string)
ieee1394.vendor_id = 13634846 (0xd00d1e) (int)
info.capabilities = {'ieee1394'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_1106_3044' (string)
info.subsystem = 'ieee1394' (string)
info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid11d80000e22f81' (string)
linux.device_file = '/dev/fw0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'firewire' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0/fw0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27cc'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' (string)
pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' (string)
pci.product_id = 10188 (0x27cc) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' (string)
usb_device.bus_number = 5 (0x5) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 8 (0x8) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:1d.7' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string)
usb.bus_number = 5 (0x5) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 8 (0x8) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:1d.7' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_1d_7_usbraw' (string)
linux.device_file = '/dev/bus/usb/005/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/usb_device/usbdev5.1' (string)
usbraw.device = '/dev/bus/usb/005/001' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27cb'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #4' (string)
pci.product_id = 10187 (0x27cb) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string)
usb_device.bus_number = 4 (0x4) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.3' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_usbraw' (string)
linux.device_file = '/dev/bus/usb/004/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/usb_device/usbdev4.1' (string)
usbraw.device = '/dev/bus/usb/004/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_3_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string)
usb.bus_number = 4 (0x4) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.3' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27ca'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #3' (string)
pci.product_id = 10186 (0x27ca) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)
usb_device.bus_number = 3 (0x3) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.2' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_usbraw' (string)
linux.device_file = '/dev/bus/usb/003/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/usb_device/usbdev3.1' (string)
usbraw.device = '/dev/bus/usb/003/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_2_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)
usb.bus_number = 3 (0x3) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.2' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c9'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #2' (string)
pci.product_id = 10185 (0x27c9) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.1' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_usbraw' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/usb_device/usbdev2.1' (string)
usbraw.device = '/dev/bus/usb/002/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.1' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27c8'
info.linux.driver = 'uhci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
pci.product = '82801G (ICH7 Family) USB UHCI Controller #1' (string)
pci.product_id = 10184 (0x27c8) (int)
pci.subsys_product = 'P5KPL-VM Motherboard' (string)
pci.subsys_product_id = 33145 (0x8179) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 2 (0x2) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:1d.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'MTE-450' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial' (string)
info.vendor = 'Wacom Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/001/013' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 278 (0x116) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 13 (0xd) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1' (string)
usb_device.max_power = 60 (0x3c) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'MTE-450' (string)
usb_device.product_id = 101 (0x65) (int)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Wacom Co., Ltd' (string)
usb_device.vendor_id = 1386 (0x56a) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0'
info.linux.driver = 'wacom' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 278 (0x116) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 13 (0xd) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0' (string)
usb.max_power = 60 (0x3c) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 101 (0x65) (int)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Wacom Co., Ltd' (string)
usb.vendor_id = 1386 (0x56a) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input'
info.callouts.add = {'hal-setup-wacom'} (string list)
info.capabilities = {'input', 'input.tablet'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0' (string)
info.product = 'Wacom Bamboo' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event7' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0' (string)
input.product = 'Wacom Bamboo' (string)
input.x11_driver = 'wacom' (string)
input.x11_options.Type = 'stylus' (string)
linux.device_file = '/dev/input/event7' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input47/event4' (string)
wacom.types = {'eraser', 'cursor', 'pad'} (string list)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input_subdev_1'
info.capabilities = {'input'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input' (string)
info.product = 'Wacom Bamboo pad' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input_subdev_1' (string)
input.device = '/dev/input/event7' (string)
input.x11_driver = 'wacom' (string)
input.x11_options.Type = 'pad' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input_subdev_0'
info.capabilities = {'input'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input' (string)
info.product = 'Wacom Bamboo cursor' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input_subdev_0' (string)
input.device = '/dev/input/event7' (string)
input.x11_driver = 'wacom' (string)
input.x11_options.Type = 'cursor' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input_subdev'
info.capabilities = {'input'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input' (string)
info.product = 'Wacom Bamboo eraser' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_if0_logicaldev_input_subdev' (string)
input.device = '/dev/input/event7' (string)
input.x11_driver = 'wacom' (string)
input.x11_options.Type = 'eraser' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_56a_65_noserial_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/013' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/usb_device/usbdev1.13' (string)
usbraw.device = '/dev/bus/usb/001/013' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/usb_device/usbdev1.1' (string)
usbraw.device = '/dev/bus/usb/001/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 2 (0x2) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:1d.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d2'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) PCI Express Port 2' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' (string)
pci.product = '82801G (ICH7 Family) PCI Express Port 2' (string)
pci.product_id = 10194 (0x27d2) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_1969_1048'
info.linux.driver = 'atl1' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d2' (string)
info.product = 'L1 Gigabit Ethernet Adapter' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
info.vendor = 'Attansic Technology Corp.' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0' (string)
pci.device_class = 2 (0x2) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0' (string)
pci.product = 'L1 Gigabit Ethernet Adapter' (string)
pci.product_id = 4168 (0x1048) (int)
pci.subsys_product_id = 33318 (0x8226) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Attansic Technology Corp.' (string)
pci.vendor_id = 6505 (0x1969) (int)
udi = '/org/freedesktop/Hal/devices/net_00_1b_fc_71_3a_8f'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1b_fc_71_3a_8f' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/net/eth0' (string)
net.80203.mac_address = 120199395983 (0x1bfc713a8f) (uint64)
net.address = '00:1b:fc:71:3a:8f' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth0' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_1969_1048' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d0'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) PCI Express Port 1' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' (string)
pci.product = '82801G (ICH7 Family) PCI Express Port 1' (string)
pci.product_id = 10192 (0x27d0) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8'
info.linux.driver = 'HDA Intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82801G (ICH7 Family) High Definition Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
pci.product = '82801G (ICH7 Family) High Definition Audio Controller' (string)
pci.product_id = 10200 (0x27d8) (int)
pci.subsys_product_id = 33353 (0x8249) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0'
info.capabilities = {'sound'} (string list)
info.category = 'sound' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
info.product = 'HDA Intel Sound Card' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0' (string)
sound.card = 0 (0x0) (int)
sound.card_id = 'HDA Intel' (string)
sound.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0'
access_control.file = '/dev/audio' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'ALC883 Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0'
access_control.file = '/dev/dsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'ALC883 Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1'
access_control.file = '/dev/snd/controlC0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.type = 'control' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'HDA Intel ALSA Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/controlC0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_0'
access_control.file = '/dev/snd/hwC0D0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/hwC0D0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.type = 'hw_specific' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'HDA Intel ALSA hardware specific Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_hw_specific_0' (string)
linux.device_file = '/dev/snd/hwC0D0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1'
access_control.file = '/dev/mixer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog OSS Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'ALC883 Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'mixer' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0'
access_control.file = '/dev/snd/pcmC0D0p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'ALC883 Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0'
access_control.file = '/dev/snd/pcmC0D0c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'ALC883 Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D0c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_1'
access_control.file = '/dev/snd/pcmC0D1c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1c' (string)
alsa.device_id = 'ALC883 Digital' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Digital ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_1' (string)
linux.device_file = '/dev/snd/pcmC0D1c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1'
access_control.file = '/dev/snd/pcmC0D1p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1p' (string)
alsa.device_id = 'ALC883 Digital' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Digital ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_playback_1' (string)
linux.device_file = '/dev/snd/pcmC0D1p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D1p' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_2'
access_control.file = '/dev/snd/pcmC0D2c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'HDA Intel' (string)
alsa.device = 2 (0x2) (int)
alsa.device_file = '/dev/snd/pcmC0D2c' (string)
alsa.device_id = 'ALC883 Analog' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_alsa_capture_2' (string)
linux.device_file = '/dev/snd/pcmC0D2c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/pcmC0D2c' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1'
access_control.file = '/dev/adsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
info.product = 'ALC883 Analog OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0_oss_pcm_1' (string)
linux.device_file = '/dev/adsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/adsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'HDA Intel' (string)
oss.device = 1 (0x1) (int)
oss.device_file = '/dev/adsp' (string)
oss.device_id = 'ALC883 Analog' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_27d8_sound_card_0' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2772'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82945G/GZ Integrated Graphics Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2772' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.product = '82945G/GZ Integrated Graphics Controller' (string)
pci.product_id = 10098 (0x2772) (int)
pci.subsys_product_id = 33146 (0x817a) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
udi = '/org/freedesktop/Hal/devices/pci_8086_2772_drm_i915_card0'
access_control.file = '/dev/dri/card0' (string)
access_control.type = 'video' (string)
drm.dri_library = 'i915' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'drm', 'access_control'} (string list)
info.category = 'drm' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2772' (string)
info.product = 'Direct Rendering Manager Device' (string)
info.subsystem = 'drm' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2772_drm_i915_card0' (string)
info.vendor = 'Intel Corporation' (string)
linux.device_file = '/dev/dri/card0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'drm' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/drm/card0' (string)
udi = '/org/freedesktop/Hal/devices/pci_8086_2770'
info.linux.driver = 'agpgart-intel' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = '82945G/GZ/P/PL Memory Controller Hub' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_8086_2770' (string)
info.vendor = 'Intel Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = '82945G/GZ/P/PL Memory Controller Hub' (string)
pci.product_id = 10096 (0x2770) (int)
pci.subsys_product_id = 33146 (0x817a) (int)
pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string)
pci.subsys_vendor_id = 4163 (0x1043) (int)
pci.vendor = 'Intel Corporation' (string)
pci.vendor_id = 32902 (0x8086) (int)
Dumped 108 device(s) from the Global Device List.
------------------------------------------------
DRM Information from dmesg:
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (900, 'stable'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.29-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-core depends on:
ii libaudit0 1.7.4-1 Dynamic library for security audit
ii libc6 2.9-13 GNU C Library: Shared libraries
ii libdbus-1-3 1.2.1-5 simple interprocess messaging syst
ii libdrm2 2.4.9-2 Userspace interface to kernel DRM
ii libfontenc1 1:1.0.4-3 X11 font encoding library
ii libgcrypt11 1.4.4-2 LGPL Crypto library - runtime libr
ii libhal1 0.5.11-8 Hardware Abstraction Layer - share
ii libpciaccess0 0.10.3-1 Generic PCI access library for X
ii libpixman-1-0 0.14.0-1 pixel-manipulation library for X a
ii libselinux1 2.0.65-5 SELinux shared libraries
ii libxau6 1:1.0.3-3 X11 authorisation library
ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protoc
ii libxfont1 1:1.3.3-1 X11 font rasterisation library
ii xserver-common 2:1.6.1.901-2 common files used by various X ser
ii xserver-xorg 1:7.4+1 the X.Org X server
Versions of packages xserver-xorg-core recommends:
ii libgl1-mesa-dri 7.4.1-1 A free implementation of the OpenG
ii xfonts-base 1:1.0.0-5 standard fonts for X
ii xkb-data 1.5-2 X Keyboard Extension (XKB) configu
Versions of packages xserver-xorg-core suggests:
pn xfonts-100dpi | xfonts-75dpi <none> (no description available)
pn xfonts-scalable <none> (no description available)
-- debconf-show failed
Reply to: