[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

libice: Changes to 'debian-unstable'



 .gitignore       |    1 
 INSTALL          |  103 ++--
 Makefile.am      |    5 
 Makefile.in      |  143 +++---
 aclocal.m4       | 1136 ++++++++++++++++++++++++++++++++++++++----------
 config.guess     |   34 +
 config.h.in      |   12 
 config.sub       |   36 +
 configure        | 1299 ++++++++++++++++++++++++++++++++++++-------------------
 configure.ac     |    7 
 debian/changelog |    5 
 depcomp          |   64 ++
 install-sh       |  348 +++++++++++---
 ltmain.sh        |  233 ++++++---
 missing          |   61 +-
 mkinstalldirs    |    5 
 src/Makefile.am  |    8 
 src/Makefile.in  |  138 +++--
 src/accept.c     |    5 
 src/authutil.c   |   51 --
 src/connect.c    |   13 
 src/getauth.c    |   11 
 src/iceauth.c    |   33 -
 src/listen.c     |   11 
 src/listenwk.c   |    2 
 src/misc.c       |   22 
 src/process.c    |   26 -
 src/register.c   |   30 -
 src/setauth.c    |   22 
 29 files changed, 2655 insertions(+), 1209 deletions(-)

New commits:
commit 8d0d1ea2cb9f8d48ac3d8091cac5768c4dc9e8eb
Author: Brice Goglin <bgoglin@debian.org>
Date:   Tue Aug 21 09:16:32 2007 +0200

    Prepare changelog for upload

diff --git a/debian/changelog b/debian/changelog
index 0199005..1988692 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,4 +1,4 @@
-libice (2:1.0.4-1) UNRELEASED; urgency=low
+libice (2:1.0.4-1) unstable; urgency=low
 
   [ Julien Cristau ]
   * Sync package sections with the override.
@@ -8,7 +8,7 @@ libice (2:1.0.4-1) UNRELEASED; urgency=low
   * Fix typo in long descriptions, thanks Philippe Cloutier
     (closes: #436009).
 
- -- Brice Goglin <bgoglin@debian.org>  Tue, 21 Aug 2007 09:14:40 +0200
+ -- Brice Goglin <bgoglin@debian.org>  Tue, 21 Aug 2007 09:16:11 +0200
 
 libice (2:1.0.3-3) unstable; urgency=low
 

commit b774c84e232d4b44ff89044aa21dd8f38be6252d
Author: Brice Goglin <bgoglin@debian.org>
Date:   Tue Aug 21 09:15:22 2007 +0200

    New upstream release

diff --git a/INSTALL b/INSTALL
index 54caf7c..5458714 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,13 +1,19 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
 
-   This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -20,9 +26,9 @@ debugging `configure').
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -32,20 +38,17 @@ some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -67,51 +70,49 @@ The simplest way to compile this package is:
 Compilers and Options
 =====================
 
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-   You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -122,7 +123,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 Optional Features
 =================
 
-   Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,11 +138,11 @@ you can use the `configure' options `--x-includes=DIR' and
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -156,7 +157,7 @@ where SYSTEM can have one of these forms:
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -167,9 +168,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +179,7 @@ A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 
-   Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -186,14 +187,18 @@ them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
 `configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
 
 `--help'
 `-h'
diff --git a/Makefile.in b/Makefile.in
index e27740a..cd5d2d3 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,11 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -36,18 +32,18 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(srcdir)/ice.pc.in $(top_srcdir)/configure AUTHORS COPYING \
 	ChangeLog INSTALL NEWS config.guess config.sub depcomp \
 	install-sh ltmain.sh missing mkinstalldirs
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES = ice.pc
@@ -55,10 +51,11 @@ SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -68,6 +65,8 @@ am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
 pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -83,8 +82,6 @@ GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -114,6 +111,7 @@ FFLAGS = @FFLAGS@
 GREP = @GREP@
 ICE_CFLAGS = @ICE_CFLAGS@
 ICE_LIBS = @ICE_LIBS@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -122,12 +120,14 @@ LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LINT = @LINT@
+LINTLIB = @LINTLIB@
+LINT_FLAGS = @LINT_FLAGS@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -138,19 +138,20 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
 XTRANS_CFLAGS = @XTRANS_CFLAGS@
 XTRANS_LIBS = @XTRANS_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -162,6 +163,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -189,8 +191,11 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 SUBDIRS = src
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = ice.pc
@@ -237,7 +242,7 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -261,10 +266,9 @@ clean-libtool:
 
 distclean-libtool:
 	-rm -f libtool
-uninstall-info-am:
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
 	@list='$(pkgconfig_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -311,8 +315,7 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
@@ -414,24 +417,22 @@ distclean-tags:
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/.
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -445,7 +446,7 @@ distdir: $(DISTFILES)
 	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
 	    distdir=`$(am__cd) $(distdir) && pwd`; \
 	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
@@ -453,6 +454,8 @@ distdir: $(DISTFILES)
 	      $(MAKE) $(AM_MAKEFLAGS) \
 	        top_distdir="$$top_distdir" \
 	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -463,7 +466,7 @@ distdir: $(DISTFILES)
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -538,7 +541,7 @@ distcheck: dist
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -563,7 +566,7 @@ all-am: Makefile $(DATA) config.h
 installdirs: installdirs-recursive
 installdirs-am:
 	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
 install-exec: install-exec-recursive
@@ -612,12 +615,20 @@ info-am:
 
 install-data-am: install-pkgconfigDATA
 
+install-dvi: install-dvi-recursive
+
 install-exec-am:
 
+install-html: install-html-recursive
+
 install-info: install-info-recursive
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -638,25 +649,26 @@ ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-pkgconfigDATA
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-am clean clean-generic clean-libtool clean-recursive \
-	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
-	dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-recursive distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-pkgconfigDATA install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic maintainer-clean-recursive \
-	mostlyclean mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-info-am \
+uninstall-am: uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+	dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \
+	distclean distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-recursive uninstall uninstall-am \
 	uninstall-pkgconfigDATA
 
 
@@ -664,6 +676,9 @@ ChangeLog:
 	(GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
 
 dist-hook: ChangeLog
+
+@LINT_TRUE@lint:
+@LINT_TRUE@	(cd src && $(MAKE) $(MFLAGS) lint)
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
index f18ffa3..040be56 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
+# 2005, 2006  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,9 +11,14 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf.  If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
+# serial 51 Debian 1.5.24-1 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -176,7 +181,7 @@ test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
 # Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
@@ -263,8 +268,9 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
 AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
 $rm conftest*
@@ -276,8 +282,9 @@ $rm conftest*
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
 AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[ac_outfile=conftest.$ac_objext
-printf "$lt_simple_link_test_code" >conftest.$ac_ext
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
 $rm conftest*
@@ -293,12 +300,20 @@ $rm conftest*
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
 AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 # Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
-}'`; fi],[])
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 ])# _LT_AC_SYS_LIBPATH_AIX
 
@@ -529,13 +544,17 @@ ia64-*-hpux*)
   rm -rf conftest*
   ;;
 
-x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
     *32-bit*)
       case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_i386_fbsd"
+          ;;
         x86_64-*linux*)
           LD="${LD-ld} -m elf_i386"
           ;;
@@ -552,6 +571,9 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
       ;;
     *64-bit*)
       case $host in
+        x86_64-*kfreebsd*-gnu)
+          LD="${LD-ld} -m elf_x86_64_fbsd"
+          ;;
         x86_64-*linux*)
           LD="${LD-ld} -m elf_x86_64"
           ;;
@@ -623,7 +645,7 @@ AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
   ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
    # (2) before a word containing "conftest.", or (3) at the end.
@@ -664,11 +686,12 @@ fi
 # ------------------------------------------------------------
 # Check whether the given compiler option works
 AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_CACHE_CHECK([$1], [$2],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $3"
-   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
    if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
      # The linker can only warn and ignore the option if not recognized
      # So say no if there are warnings
@@ -782,24 +805,27 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     fi
     ;;
   *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 ])
@@ -1026,7 +1052,8 @@ fi
 # ---------------------------------
 # Check to see if options -c and -o are simultaneously supported by compiler
 AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
   [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
   [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
@@ -1034,7 +1061,7 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    mkdir conftest
    cd conftest
    mkdir out
-   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
    lt_compiler_flag="-o out/conftest2.$ac_objext"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -1174,6 +1201,7 @@ else
    darwin*)
        if test -n "$STRIP" ; then
          striplib="$STRIP -x"
+         old_striplib="$STRIP -S"
          AC_MSG_RESULT([yes])
        else
   AC_MSG_RESULT([no])
@@ -1191,7 +1219,8 @@ fi
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
 AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_MSG_CHECKING([dynamic linker characteristics])
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -1205,20 +1234,58 @@ shlibpath_overrides_runpath=unknown
 version_type=none
 dynamic_linker="$host_os ld.so"
 sys_lib_dlsearch_path_spec="/lib /usr/lib"
+m4_if($1,[],[
 if test "$GCC" = yes; then
-  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`echo $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
+fi])
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -1375,12 +1442,8 @@ darwin* | rhapsody*)
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
-  if test "$GCC" = yes; then
-    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
-  else
-    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
-  fi
+  m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -1434,7 +1497,7 @@ freebsd* | dragonfly*)
     shlibpath_overrides_runpath=no
     hardcode_into_libs=yes
     ;;
-  freebsd*) # from 4.6 on
+  *) # from 4.6 on, and DragonFly
     shlibpath_overrides_runpath=yes
     hardcode_into_libs=yes
     ;;
@@ -1497,7 +1560,7 @@ hpux9* | hpux10* | hpux11*)
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[[3-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1568,7 +1631,7 @@ linux* | k*bsd*-gnu)
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -1674,6 +1737,10 @@ osf3* | osf4* | osf5*)
   sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
   ;;
 
+rdos*)
+  dynamic_linker=no
+  ;;
+
 solaris*)
   version_type=linux
   need_lib_prefix=no
@@ -1779,7 +1846,8 @@ fi
 # _LT_AC_TAGCONFIG
 # ----------------
 AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_ARG_WITH([tags],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_ARG_WITH([tags],
     [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
         [include additional configurations @<:@automatic@:>@])],
     [tagnames="$withval"])
@@ -2040,7 +2108,7 @@ m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
 
 # AC_PATH_TOOL_PREFIX
 # -------------------
-# find a file program which can recognise shared library
+# find a file program which can recognize shared library
 AC_DEFUN([AC_PATH_TOOL_PREFIX],
 [AC_REQUIRE([AC_PROG_EGREP])dnl
 AC_MSG_CHECKING([for $1])
@@ -2103,7 +2171,7 @@ fi
 
 # AC_PATH_MAGIC
 # -------------
-# find a file program which can recognise a shared library
+# find a file program which can recognize a shared library
 AC_DEFUN([AC_PATH_MAGIC],
 [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -2250,7 +2318,7 @@ esac
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics



Reply to: