Bug#229850: xserver-xfree86: Nokia 446Xpro properly detected but sync incorrect

[Jay Berkenbilt <ejb@ql.org>]

Here it is.  I see the correct ranges in the output below.  When
Debian Installer beta 4 is released, I'll probably do a reinstall from
scratch and see what happens.

For kicks, I just moved my /etc/X11/XF86Config-4 out of the way, ran
dpkg-reconfigure xserver-xfree86 in high priority mode accepting
defaults (where the system did actually believe that 1280x1024 at 85
Hz was my best mode) and then reran dexconfig.  I got the same default
values as reported in my original bug report, not the values detected
below.  I don't know whether that information is useful to you.

My system is very current -- my last apt-get dist-upgrade was on April
18.

-- 
Jay Berkenbilt <ejb@ql.org>
http://www.ql.org/q/

--------------------------------------

get-edid: get-edid version 1.4.1

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
	Function supported
	Call successful

	VBE version 200
	VBE string at 0x11110 "ATI MACH64"

VBE/DDC service about to be called
	Report DDC capabilities

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
	Function supported
	Call successful

	Monitor and video card combination does not support DDC1 transfers
	Monitor and video card combination supports DDC2 transfers
	0 seconds per 128 byte EDID block transfer
	Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
	Read EDID

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
parse-edid: parse-edid version 1.4.1
	Function supported
	Call successful

parse-edid: EDID checksum passed.

	# EDID version 1 revision 2
Section "Monitor"
	# Block type: 2:0 3:fd
	# Block type: 2:0 3:ff
	# Block type: 2:0 3:fc
	Identifier "Nokia 446XproNOK"
	VendorName "NOK"
	ModelName "Nokia 446XproNOK"
	# Block type: 2:0 3:fd
	HorizSync 30-107
	VertRefresh 50-150
	# Max dot clock not given
	# Block type: 2:0 3:ff
	# Block type: 2:0 3:fc
	# DPMS capabilities: Active off:yes  Suspend:yes  Standby:yes

	Mode 	"1600x1200"	# vfreq 85.000Hz, hfreq 106.250kHz
		DotClock	229.500000
		HTimings	1600 1664 1856 2160
		VTimings	1200 1201 1204 1250
		Flags	"+HSync" "+VSync"
	EndMode
	# Block type: 2:0 3:fd
	# Block type: 2:0 3:ff
	# Block type: 2:0 3:fc
EndSection

--------------------------------------