Neomagic NM 2200: X server 4.1.0.1 terminates after initial screen
I have recently upgraded my VAIO PCG-F350 with an NM2200 Neomagic
controller to the latest unstable (from one that was a few months
old).
XFree 4 used to work but doesn't any more.
It terminates after briefly showing the default X background (the
black-white pseudo-grey background with mouse cursor in the middle).
The crash happens with the audio driver module nm256 installed
or not installed at boot time.
Attached are the XFree86.0.log file and the XF86Config-4 file.
Console messages are some from XFree86.0.log and then the line:
waiting for X server to shut down
Claus
--
Claus Fischer <claus.fischer@clausfischer.com>
http://www.clausfischer.com/
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# CF Neomagic
# Option "XaaNoSolidFillRect"
Option "ShadowFB"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 20"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
Option "Emulate3Timeout" "150"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "NeoMagic (laptop/notebook)"
Driver "neomagic"
#VideoRam 2560
# Chipset "NM2160"
# IOBase 0xfea00000
# MemBase 0xfd000000
# VideoRam 2048
# DacSpeed 90
# Option "linear"
# Option "nolinear"
# Option "sw_cursor"
# Option "hw_cursor"
# Option "no_accel"
# Option "intern_disp"
# Option "extern_disp"
# Option "mmio"
# Option "no_mmio"
# Option "lcd_center"
# Option "no_stretch"
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NeoMagic (laptop/notebook)"
Monitor "My Monitor"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1024x768" "640x480" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "640x480" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: xx August 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Oct 10 07:44:31 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "NeoMagic (laptop/notebook)"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 20"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003b54, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 10c8,0005 card 104d,8040 rev 20 class 03,00,00 hdr 80
(II) PCI: 00:08:1: chip 10c8,8005 card 104d,8041 rev 20 class 04,01,00 hdr 80
(II) PCI: 00:09:0: chip 104d,8009 card 104d,8043 rev 01 class 0c,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1180,0478 card 0000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0478 card 0000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0b:0: chip 127a,2005 card 104d,8044 rev 01 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:8:0) Neomagic NM2200 rev 32, Mem @ 0xfd000000/24, 0xfe800000/22, 0xfed00000/20
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfe7e0000 - 0xfe7fffff (0x20000) MX[B]E
[1] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B]E
[2] -1 0 0xfec00000 - 0xfeffffff (0x400000) MX[B]E
[3] -1 0 0xfe000000 - 0xffffffff (0x2000000) MX[B]E
[4] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B](B)
[5] -1 0 0xfe800000 - 0xfebfffff (0x400000) MX[B](B)
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000fce8 - 0x0000fcef (0x8) IX[B]E
[8] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
(II) Inactive PCI resource ranges:
[0] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
(II) PCI Memory resource overlap reduced 0xfe7e0000 from 0xfe7fffff to 0xfe7effff
(II) PCI Memory resource overlap reduced 0xfec00000 from 0xfeffffff to 0xfecfffff
(II) PCI Memory resource overlap reduced 0xfe000000 from 0xffffffff to 0xfe3fffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe7e0000 - 0xfe7effff (0x10000) MX[B]E
[1] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B]E
[2] -1 0 0xfec00000 - 0xfecfffff (0x100000) MX[B]E
[3] -1 0 0xfe000000 - 0xfe3fffff (0x400000) MX[B]E
[4] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B](B)
[5] -1 0 0xfe800000 - 0xfebfffff (0x400000) MX[B](B)
[6] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[7] -1 0 0x0000fce8 - 0x0000fcef (0x8) IX[B]E
[8] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe7e0000 - 0xfe7effff (0x10000) MX[B]E
[6] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B]E
[7] -1 0 0xfec00000 - 0xfecfffff (0x100000) MX[B]E
[8] -1 0 0xfe000000 - 0xfe3fffff (0x400000) MX[B]E
[9] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B](B)
[10] -1 0 0xfe800000 - 0xfebfffff (0x400000) MX[B](B)
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000fce8 - 0x0000fcef (0x8) IX[B]E
[15] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
[16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) Primary Device is: PCI 00:08:0
(--) Assigning device section with no busID to primary device
(--) Chipset neo2200 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe7e0000 - 0xfe7effff (0x10000) MX[B]E
[6] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B]E
[7] -1 0 0xfec00000 - 0xfecfffff (0x100000) MX[B]E
[8] -1 0 0xfe000000 - 0xfe3fffff (0x400000) MX[B]E
[9] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B](B)
[10] -1 0 0xfe800000 - 0xfebfffff (0x400000) MX[B](B)
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000fce8 - 0x0000fcef (0x8) IX[B]E
[15] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
[16] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfe7e0000 - 0xfe7effff (0x10000) MX[B]E
[6] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B]E
[7] -1 0 0xfec00000 - 0xfecfffff (0x100000) MX[B]E
[8] -1 0 0xfe000000 - 0xfe3fffff (0x400000) MX[B]E
[9] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B](B)
[10] -1 0 0xfe800000 - 0xfebfffff (0x400000) MX[B](B)
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000fce8 - 0x0000fcef (0x8) IX[B]E
[18] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
[19] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
[20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) NEOMAGIC(0): Chipset is a MagicMedia 256AV (NM2200)
(--) NEOMAGIC(0): Panel is a 1024x768 color TFT display
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) NEOMAGIC(0): initializing int10
(II) NEOMAGIC(0): Primary V_BIOS segment is: 0xc000
(II) NEOMAGIC(0): VESA BIOS detected
(II) NEOMAGIC(0): VESA VBE Version 2.0
(II) NEOMAGIC(0): VESA VBE Total Mem: 2496 kB
(II) NEOMAGIC(0): VESA VBE OEM: MagicGraph 256 AV 48K
(II) NEOMAGIC(0): VESA VBE OEM Software Rev: 1.17
(II) NEOMAGIC(0): VESA VBE OEM Vendor: NeoMagic
(II) NEOMAGIC(0): VESA VBE OEM Product: MagicMedia 256 AV
(II) NEOMAGIC(0): VESA VBE OEM Product Rev: 01.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) NEOMAGIC(0): VESA VBE DDC supported
(II) NEOMAGIC(0): VESA VBE DDC Level none
(II) NEOMAGIC(0): VESA VBE DDC transfer in appr. 0 sec.
(II) NEOMAGIC(0): VESA VBE DDC read failed
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(II) NEOMAGIC(0): I2C bus "I2C bus" initialized.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" removed.
(--) NEOMAGIC(0): No DDC signal
(**) NEOMAGIC(0): Depth 16, (--) framebuffer bpp 16
(==) NEOMAGIC(0): RGB weight 565
(==) NEOMAGIC(0): Default visual is TrueColor
(==) NEOMAGIC(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NEOMAGIC(0): Internal LCD only display mode
(==) NEOMAGIC(0): using linear mode
(**) NEOMAGIC(0): using PCI Burst mode
(--) NEOMAGIC(0): FB base address is set at 0xFD000000.
(--) NEOMAGIC(0): MMIO base address is set at 0xFE800000.
(--) NEOMAGIC(0): VideoRAM: 2560 kByte
(--) NEOMAGIC(0): Max Clock: 110000 kHz
(II) NEOMAGIC(0): My Monitor: Using hsync range of 31.50-57.00 kHz
(II) NEOMAGIC(0): My Monitor: Using vrefresh range of 50.00-90.00 Hz
(II) NEOMAGIC(0): Clock range: 11.00 to 110.00 MHz
(II) NEOMAGIC(0): Removing mode (640x350) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x350" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (720x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "720x400" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1024x768" (hsync out of range)
(II) NEOMAGIC(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1152x864" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1280x960) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1280x960" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for mode)
(--) NEOMAGIC(0): Virtual size is 1024x768 (pitch 1024)
(**) NEOMAGIC(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NEOMAGIC(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NEOMAGIC(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NEOMAGIC(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) NEOMAGIC(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NEOMAGIC(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(++) NEOMAGIC(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfed00000 - 0xfedfffff (0x100000) MX[B]
[1] 0 0 0xfe800000 - 0xfebfffff (0x400000) MX[B]
[2] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xfe7e0000 - 0xfe7effff (0x10000) MX[B]E
[9] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B]E
[10] -1 0 0xfec00000 - 0xfecfffff (0x100000) MX[B]E
[11] -1 0 0xfe000000 - 0xfe3fffff (0x400000) MX[B]E
[12] -1 0 0xfed00000 - 0xfedfffff (0x100000) MX[B](B)
[13] -1 0 0xfe800000 - 0xfebfffff (0x400000) MX[B](B)
[14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000fce8 - 0x0000fcef (0x8) IX[B]E
[21] -1 0 0x0000fcf0 - 0x0000fcff (0x10) IX[B]E
[22] -1 0 0x0000fcc0 - 0x0000fcff (0x40) IX[B]E
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) NEOMAGIC(0): Write-combining range (0xfd000000,0x400000)
(II) NEOMAGIC(0): Stretching disabled
(II) NEOMAGIC(0): Not programming shadow registers
(II) NEOMAGIC(0): Using linear framebuffer at: 0xFD000000
(--) NEOMAGIC(0): 1048576 bytes off-screen memory available
(II) NEOMAGIC(0): Using H/W Cursor.
(II) NEOMAGIC(0): Using 256 scanlines of offscreen memory for pixmap caching
(II) NEOMAGIC(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
(II) NEOMAGIC(0): Acceleration Initialized
(==) NEOMAGIC(0): Backing store disabled
(==) NEOMAGIC(0): Silken mouse enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "Microsoft"
(**) Mouse1: Protocol: "Microsoft"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Buttons: 3
(**) Option "Emulate3Buttons"
(**) Option "Emulate3Timeout" "150"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 150
(**) Option "BaudRate" "1200"
(**) Mouse1: BaudRate: 1200
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(II) NEOMAGIC(0): Not programming shadow registers
Reply to: