Pipewire issues on Trixie
Debians,
On a fresh install of Trixie, the sound is unlistenable for every
sounds/applications.
I'm seeing the below messages and I'm hoping that it explanes why my
sound is that bad:
pipewire-pulse[5888]: mod.protocol-pulse: 79: source not ready: sample:0
map:0 volume:0
pipewire[8220]: spa.alsa: 'front:0': capture open failed: Device or
resource busy
pipewire[8220]: mod.adapter: 0x56213d318e70: can't get format: Device or
resource busy
wireplumber[8224]: s-monitors: Failed to create
alsa_input.pci-0000_00_1b.0.analog-stereo: Object activation aborted:
PipeWire proxy destroyed
Looking in dmesg, I see for t`rnd_hda`:
[ 4.865130] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops
i915_audio_component_bind_ops [i915])
[ 4.968977] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898:
line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.968984] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 4.968986] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 4.968988] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.968989] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 4.968990] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.968991] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.968993] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.968994] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
`lspci` reports for the audio:
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family
High Definition Audio Controller (rev 04)
'm at a lost on how to get proper sound for a "Realtek ALC898', I'm
open to any ideas?
To me, this is Pipewire related as the sound is perfectly fine on
Bullseye and during the instalation of Trixie with speech support.
Unless I'm doing it rong, this is not
https://wiki.debian.org/PipeWire#choppy_audio_on_systems_with_high_load
--
John Doe
Reply to: