Re: WLAN with /etc/network/interfaces

[Hans <hans.ullrich@loop.de>]

Looks like your firmware is not available. For broadcomm cards there is an 
extra installer, which downloads it seperately.

In Debian the firmware is not shipped in the repo, but an installer is 
shipped.

Check for any broadcom related packages.

Hope this helps.

Best

Hans
> In the kernel messages I see:
> 
> [   19.474457] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.solidrun,cubox-i-q.bin (-2)
> [   19.493647] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.solidrun,cubox-i-q.bin (-2)
> [   19.526434] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.solidrun,cubox-i-q.txt (-2)
> [   19.552764] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.solidrun,cubox-i-q.txt (-2)
> [   19.597617] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.solidrun,cubox-i-q.clm_blob (-2)
> [   19.676688] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.solidrun,cubox-i-q.clm_blob (-2)
> [   19.737380] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.clm_blob (-2)
> [   19.773626] brcmfmac mmc0:0001:1: firmware: failed to load brcm/
> brcmfmac4330-sdio.clm_blob (-2)
> [   23.420532] ieee80211 phy0: brcmf_p2p_create_p2pdev: timeout
> occurred
> [   23.427094] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface
> p2p-dev-
> wlan0 type 10 failed: err=-5
> 
> Any hint or advice is welcome.
> 
> Thanks
> Rainer