Re: Transport endpoint is not connected
On Fri, Jul 07, 2023 at 12:34:48AM -0400, hlyg wrote:
> deb12 is slow, it complains floppy error. in bios floppy drive is set to
> 1.44M though i have no floppy drive. this isn't problem for deb10/11. it's
> easy to correct bios setting but i am afraid deb12 is still slow.
>
If you don't have a floppy drive - don't set it up in the BIOS,
If you're running off a disk that's connected via USB - it will be slower
than the same disk directly attached to SATA.
Debian 12 is (probably) no slower than Debian 11 - but it is more up to date.
Some file sizes do get bigger, however, and the steady state is that you
never have quite enough memory as newer releases are made.
> Jul 06 23:50:00 bw kernel: scsi 4:0:0:0: Direct-Access USB SanDisk
> 3.2Gen1 1.00 PQ: 0 ANSI: 6
> Jul 06 23:50:00 bw kernel: sd 4:0:0:0: [sdc] 60088320 512-byte logical
> blocks: (30.8 GB/28.7 GiB)
> Jul 06 23:50:00 bw kernel: sd 4:0:0:0: [sdc] Write Protect is off
> Jul 06 23:50:00 bw kernel: sd 4:0:0:0: [sdc] Mode Sense: 43 00 00 00
> Jul 06 23:50:00 bw kernel: sd 4:0:0:0: [sdc] Write cache: disabled, read
> cache: enabled, doesn't support DPO or FUA
> Jul 06 23:50:00 bw kernel: sdc: sdc1 sdc2 sdc3
> Jul 06 23:50:00 bw kernel: sd 4:0:0:0: [sdc] Attached SCSI removable disk
> Jul 06 23:50:00 bw kernel: random: crng init done
> ...
> Jul 06 23:50:00 bw kernel: I/O error, dev fd0, sector 0 op 0x0:(READ) flags
> 0x0 phys_seg 1 prio class 2
> Jul 06 23:50:00 bw kernel: floppy: error 10 while reading block 0
> Jul 06 23:50:00 bw kernel: I/O error, dev fd0, sector 0 op 0x0:(READ) flags
> 0x0 phys_seg 1 prio class 2
> Jul 06 23:50:00 bw kernel: floppy: error 10 while reading block 0
>
Changed to respond to the list first
With every good wish,
Andy Cater
Reply to: