Re: trying to install bullseye for about 25th time.
gene heskett wrote:
> But I've put another drive in, that I want to install a non efi system on
> too.
>
> booted back to bullseye to id the drive, its this one: (from dmesg)
> [ 18.508537] ata5.00: ATA-11: Samsung SSD 870 QVO 1TB, SVQ02B6Q, max
> UDMA/133
> ===========
> [ 18.508541] ata5.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth
> 32), AA
> How do I proceed? The partitioner does not identify the drives found
> adequatly. The drive is plugged into the mainboard controller, I think to
> port 5 of 6.
>
> I could label it, but the partitioner doesn't do labels.
> This drive is new, and has not anything written to it.
ls -al /dev/disk/by-id/ | grep SVQ02B6Q
should get you something like
lrwxrwxrwx 1 root root 9 Jan 29 15:26 ata-Samsung_SSD_870_QVO_GB_SVQ02B6Q -> ../../sdb
and that will let you know that it's /dev/sdb
helpful?
-dsr-
Reply to: