[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

error message for sda



Hi:
Running updated Debian on a pretty old iMac.  Seeing messages that complain about sda, only drive in the system:

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000e   100   253   006    Old_age   Always       -       0
  3 Spin_Up_Time            0x0003   095   093   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   093   093   020    Old_age   Always       -       7818
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -       521708297
  9 Power_On_Hours          0x0032   045   045   000    Old_age   Always       -       48690
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2325
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   045   037   045    Old_age   Always   FAILING_NOW 55 (255 255 60 26 0)
194 Temperature_Celsius     0x0022   055   063   000    Old_age   Always       -       55 (0 19 0 0 0)
195 Hardware_ECC_Recovered  0x001a   056   047   000    Old_age   Always       -       44745763
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

I think this means its time to replace the hard drive,  any other thoughts?

thanks in advance,

If more appropriate for another listh please advise.

Bob Crochelt

Reply to: