Re: Linux not seeing all SATA drives

[Dennis Wicks <wix@mgssub.com>]

David Christensen wrote on 10/12/20 10:01 PM:
> On 2020-10-12 19:19, Dennis Wicks wrote:
> > I have 3 SATA drives on my system. I replaced all my red 
> > cables with new black cables. The BIOS sees all of them 
> > but when linux finishes booting it only sees two of them. 
> > Do I have to do something to linux so it sees the third 
> > drive?
> >
> > FYI, I have the system disk in sata-1, the drive on sata2 
> > is not seen, but the drive on sata3 is seen and in use. 
> > The CD/DVD drive is on sata6 and is also seen.
> >
> > Thanks for any and all help!
> > Dennis
>
> Run the following commands as root.  If you need help 
> interpreting the results, post your console session:
>
> # lsblk
>
> # fdisk -l
>
> # mount | grep sd
>
>
> David
Thanks for the tip, but none of those commands show the 
third disk, just two.
What might be /dev/sdc doesn't show up with any command I 
have tried.

Thanks!
Dennis