[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: can't mount sdf1 in stretch, gparted claims its fat32



On Monday 03 February 2020 14:15:14 David Wright wrote:

> On Mon 03 Feb 2020 at 14:02:31 (-0500), Gene Heskett wrote:
> > On Monday 03 February 2020 13:31:16 David Wright wrote:
> > > On Mon 03 Feb 2020 at 12:40:20 (-0500), Gene Heskett wrote:
> > > > I want to look at its directory structure because its different,
> > > > and I'd like to deduce how to generate it in a kernel make for a
> > > > newer, preempt-rt kernel.
> > >
> > > Yes, I can't mount it either, because I'm not running stretch.
> >
> > And I am running stretch with a custom realtime kernel for linuxcnc
> > use.
> >
> > > > Thanks for any enlightenment.
> > >
> > > I've given my reason; can you give us yours, for our further
> > > enlightenment?
> >
> > gene@coyote:~/PublicA/pi-buster$ sudo mount -tvfat /dev/sdf1
> > /media/sdf1 mount: wrong fs type, bad option, bad superblock on
> > /dev/sdf1, missing codepage or helper program, or other error
> >
> >        In some cases useful info is found in syslog - try
> >        dmesg | tail or so.
> >
> > And dmesg says:
> > [2903524.766017] usb 1-12.4.1.3: new high-speed USB device number 20
> > using xhci_hcd
> > [2903525.047017] usb 1-12.4.1.3: New USB device found,
> > idVendor=048d, idProduct=1336
> > [2903525.047027] usb 1-12.4.1.3: New USB device strings: Mfr=1,
> > Product=2, SerialNumber=3
> > [2903525.047033] usb 1-12.4.1.3: Product: Mass Storage Device
> > [2903525.047037] usb 1-12.4.1.3: Manufacturer: Generic
> > [2903525.047041] usb 1-12.4.1.3: SerialNumber: 00000000000006
> > [2903525.047961] usb-storage 1-12.4.1.3:1.0: USB Mass Storage device
> > detected
> > [2903525.052481] scsi host7: usb-storage 1-12.4.1.3:1.0
> > [2903526.760829] scsi 7:0:0:0: Direct-Access     Generic  Storage
> > Device 0.00 PQ: 0 ANSI: 2
> > [2903526.798501] sd 7:0:0:0: Attached scsi generic sg6 type 0
> > [2903526.798879] sd 7:0:0:0: [sdf] 121319424 512-byte logical
> > blocks: (62.1 GB/57.8 GiB)
> > [2903526.799039] sd 7:0:0:0: [sdf] Write Protect is off
> > [2903526.799041] sd 7:0:0:0: [sdf] Mode Sense: 03 00 00 00
> > [2903526.799210] sd 7:0:0:0: [sdf] No Caching mode page found
> > [2903526.799211] sd 7:0:0:0: [sdf] Assuming drive cache: write
> > through [2903526.801588]  sdf: sdf1 sdf2
> > [2903526.803323] sd 7:0:0:0: [sdf] Attached SCSI removable disk
>
> I see there are two partitions, which is a little unusual for a USB
> stick. Are you by any chance trying to write a bootable stick?
> It might help to know how you wrote this stick, assuming you did.
>

Stick?  Its a u-sd card to boot an rpi4 with.

> Cheers,
> David.


Cheers David, Gene Heskett
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/gene>


Reply to: