Re: MTI camera and Hauppauge PVR-150 framegrabber.
* From: Dan Ritter dsr@randomstring.org
* Date: Fri, 10 Mar 2017 07:34:35 -0500
> Coax?
Yes, the camera output is composite video through a BNC connector.
Specs for a similar camera here.
http://pro.jvc.com/prof/attributes/specs.jsp?model_id=MDL100970&feature_id=03
It can connect to the receiving device via a coaxial cable with a BNC
connector on each end. The PVR-150 receives composite video through a
RCA socket. An adapter is used to connect the BNC on the end of the
cable to the RCA on the card.
> The coax connector on the PVR150 expects to be connecting a CATV
> signal.
This card has two female F connectors.
https://en.wikipedia.org/wiki/F_connector
Nothing is connected to either.
> You should also have inputs for RCA composite and SVideo Y/C,
> which don't need to be tuned.
Here using only the RCA connector.
Unless a new idea surfaces this morning, I'll buy another card in the
afternoon and find whether the display is different with that.
Thanks for the help, ... Peter E.
--
123456789 123456789 123456789 123456789 123456789 123456789 123456789
Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757
http://easthope.ca/Peter.html Bcc: peter at easthope. ca
Reply to: