Dne 13.7.2016 v 15:40 Brian napsal(a):
On to Plan C. 1. In the software you have from Epson (iscan-bundle) there is a .deb in the "core" directory. Open up the .deb (I use mc for that) and copy the following files to your machine. /etc/sane.d/dll.d/iscan to /etc/sane.d/dll.d/ /etc/sane.d/epkowa.conf to /etc/sane.d/ /usr/lib/sane to /usr/lib
OK, only the third was new, the first two were the same /as for bites/
2. The "data" directory has iscan-data. 'mkdir /usr/share/iscan-data' on your machine and copy /usr/share/iscan-data/usb to it.
OK
3. Have /etc/sane.d/dll.conf with the single line epkowa
OK
All the files are under a free license, if it matters to you.
Not really. scanimage -L is good, even when running many times: dady@linuxbox:~$ scanimage -L [sanei_debug] Setting debug level of dll to 100. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.25 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan [dll] sane_init/read_config: reading dll.d/iscan [dll] add_backend: adding backend `epkowa' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `epkowa' [dll] add_backend: `epkowa' is already there [dll] sane_get_devices[dll] load: searching backend `epkowa' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (No such file or directory)
[dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [dll] init: backend `epkowa' is version 1.0.213[dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' [dll] init: initializing backend `ls5000' [dll] init: backend `ls5000' is version 1.0.0[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] sane_get_devices: found 1 devices device `epkowa:usb:001:005' is a Epson (unknown model) flatbed scanner [dll] sane_exit: exiting [dll] sane_exit: calling backend `epkowa's exit function [dll] sane_exit: calling backend `ls5000's exit function [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finishedrunning xsane is not good when the printer was in sleeping state, but its not the issue now /just for you to know/:
dady@linuxbox:~$ xsane Gtk-Message: Failed to load module "canberra-gtk-module" [sanei_debug] Setting debug level of dll to 100. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.25 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/iscan [dll] sane_init/read_config: reading dll.d/iscan [dll] add_backend: adding backend `epkowa' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `epkowa' [dll] add_backend: `epkowa' is already there [dll] sane_get_devices[dll] load: searching backend `epkowa' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-epkowa.so.1' (Adresář nebo soubor neexistuje)
[dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [dll] init: backend `epkowa' is version 1.0.213 ...waiting...[dll] load: searching backend `ls5000' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ls5000.so.1' [dll] init: initializing backend `ls5000' [dll] init: backend `ls5000' is version 1.0.0[dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `epkowa:usb:001:005'... another waiting ...some error message after in dialog window:invalid argument
[dll] sane_exit: exiting [dll] sane_exit: calling backend `epkowa's exit function [dll] sane_exit: calling backend `ls5000's exit function [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished running xsane immediately after power on the printer: works! :-) attached: first scan: Thank you (not sure is the attachement are good here). Thank you, its quite crazy, but works. Pavel
Attachment:
thank you.jpeg
Description: JPEG image