[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

PXE install



Dear List -

After a little bit of searching the problem causing the "no boot filename found" error is the lack of a PXE server. I tried to modify a template for a server https://wiki.debian.org/PXEBootInstall. The modified file is attached.

Running Debian 8.4..

Whatismyip gives 67.83.96.189
The Arris modem is 192.168.1.145
This feeds into a Cisco wireless switch 192.168.1.1

TIA

Ethan
 Configuration file for /sbin/dhclient, which is included in Debian's
#       dhcp3-client package.
#
# This is a sample configuration file for dhclient. See dhclient.conf's
#       man page for more information about the syntax of this file
#       and a more comprehensive list of the parameters understood by
#       dhclient.
#
# Normally, if the DHCP server provides reasonable information and does
#       not leave anything out (like the domain name, for example), then
#       few changes must be made to this file, if any.
#

option rfc3442-classless-static-routes code 121 = array of unsigned integer 8;

#send host-name "andare.fugue.com";
send host-name = gethostname();
#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
#send host-name "andare.fugue.com";
send host-name = gethostname();
#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
#send dhcp-lease-time 3600;
#supersede domain-name "fugue.com home.vix.com";
#prepend domain-name-servers 127.0.0.1;
request subnet-mask, broadcast-address, time-offset, routers,
        domain-name, domain-name-servers, domain-search, host-name,
        dhcp6.name-servers, dhcp6.domain-search,
        netbios-name-servers, netbios-scope, interface-mtu,
        rfc3442-classless-static-routes, ntp-servers;
#require subnet-mask, domai#require subnet-mask, domain-name-servers;
#timeout 60;
#retry 60;
#reboot 10;
#select-timeout 5;
#initial-interval 2;
#script "/etc/dhcp3/dhclient-script";
#media "-link0 -link1 -link2", "link0 link1";
#reject 192.33.137.209;

#domain-name-servers;
#timeout 60;
alias {
#  interface "eth0";
#  fixed-address 192.5.5.213;
  option subnet-mask 255.255.255.255;
}

#lease {
#  interface "eth0";
#  fixed-address 192.33.137.200;
#  medium "link0 link1";
  option host-name "wmcomputersystems.com";
  option subnet-mask 255.255.255.0;

  option subnet-mask 255.255.255.0;
  option broadcast-address 192.168.1.145
  range 192.168.0.3 192.168.0.253;
;
   option routers 192.168.1.145;
   option domain-name-servers 192.168.1.145;
  filename "pxelinux.0"; # (this we will provide later)
}
group {
#  renew 2 2000/1/12 00:00:01;
#  rebind 2 2000/1/12 00:00:01;
#  expire 2 2000/1/12 00:00:01;

  next-server 192.168.0.2;                # our Server
  host tftpclient {
    filename "pxelinux.0"; # (this we will provide later)

}




Reply to: