Ah, dammit ! Ça doit être ça. Les caractéristiques de la CM donnent un
GPU intégré avec jusqu'à 2 Gio de mémoire partagée, donc prélevée sur
les 8 Gio. Bizarre, quand même : quand je compte les octets de la RAM
décrits par la carte BIOS-e820, j'obtiens :
* 7455 Mo utilisables ;
* 103 Mo réservés ;
* 65 ko de données ACPI ;
* 7,6 Mo en NVS (?) ACPI.
Donc ni un total de 8 Gio, ni les chiffres vus par free -m. Ça, je ne me
l'explique pas, mais bon, en tout cas, il faut que je trouve un moyen de
réduire l'empreinte RAM du GPU, puisque je n'ai pas trop besoin de lui
attribuer de la RAM.
Merci pour la suggestion, Jean-Marc.
Le jeudi 09 juillet 2015 à 16:27 +0200, Live Informatique a écrit :
> Plutot curieux, peut être de la mémoire partagée avec ton GPU ?
>
>
> Décris ton matos ca sera plus simple ...
>
>
> Cordialement,
>
> Jean-Marc Beuchée
> LIVE INFORMATIQUE
> www.live-informatique.com
> 4 Rue de Coulon
> 35160 MONTFORT/MEU
> 02 99 09 01 67
> 06 71 54 28 14
>
> 2015-07-09 15:47 GMT+02:00 David Guyot
> <david.guyot@europecamions-interactive.com>:
> Cher tous,
>
> J'ai un problème avec ma Jessie amd64 à jour sur une CM Asus
> A88XM-PLUS
> avec un UEFI à jour : j'ai deux barettes de 4 Go installées,
> détectées
> comme telles par l'UEFI, mais la bécane refuse d'en exploiter
> plus de
> 6872 Mo. Je précise qu'un problème matériel est très
> improbable car une
> autre bécane avec la même configuration matérielle et
> logicielle
> présente le même problème. J'ai parcouru l'UEFI dans tous les
> sens pour
> trouver un paramètre lié à la mémoire, mais je ne pouvais y
> changer que
> la fréquence et la tension. Le plus étrange est que certaines
> commandes
> montrent bien les 8 Go matériels, d'autres non :
> $ > free -m
> total used free shared buffers
> cached
> Mem: 6872 2558 4314 53 47
> 793
> -/+ buffers/cache: 1716 5155
> Swap: 14223 0 14223
> # > dmidecode
> […]
> Handle 0x002F, DMI type 16, 23 bytes
> Physical Memory Array
> Location: System Board Or Motherboard
> Use: System Memory
> Error Correction Type: None
> Maximum Capacity: 64 GB
> Error Information Handle: Not Provided
> Number Of Devices: 4
>
> Handle 0x0030, DMI type 19, 31 bytes
> Memory Array Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x00FFFFFFFFF
> Range Size: 64 GB
> Physical Array Handle: 0x002F
> Partition Width: 255
>
> Handle 0x0031, DMI type 17, 34 bytes
> Memory Device
> Array Handle: 0x002F
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 4096 MB
> Form Factor: DIMM
> Set: None
> Locator: DIMM_A1
> Bank Locator: A1_BANK0
> Type: DDR3
> Type Detail: Synchronous Unbuffered (Unregistered)
> Speed: 1600 MHz
> Manufacturer: A1_Manufacturer1
> Serial Number: A1_SerNum1
> Asset Tag: A1_AssetTagNum1
> Part Number: Array1_PartNumber1
> Rank: Unknown
> Configured Clock Speed: 1600 MHz
>
> Handle 0x0032, DMI type 20, 35 bytes
> Memory Device Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x000FFFFFFFF
> Range Size: 4 GB
> Physical Device Handle: 0x0031
> Memory Array Mapped Address Handle: 0x0030
> Partition Row Position: 1
>
> Handle 0x0033, DMI type 17, 34 bytes
> Memory Device
> Array Handle: 0x002F
> Error Information Handle: Not Provided
> Total Width: Unknown
> Data Width: 64 bits
> Size: No Module Installed
> Form Factor: Unknown
> Set: None
> Locator: DIMM_A2
> Bank Locator: A1_BANK1
> Type: Unknown
> Type Detail: None
> Speed: Unknown
> Manufacturer: A1_Manufacturer0
> Serial Number: A1_SerNum0
> Asset Tag: A1_AssetTagNum0
> Part Number: Array1_PartNumber0
> Rank: Unknown
> Configured Clock Speed: Unknown
>
> Handle 0x0034, DMI type 126, 35 bytes
> Inactive
>
> Handle 0x0035, DMI type 17, 34 bytes
> Memory Device
> Array Handle: 0x002F
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 4096 MB
> Form Factor: DIMM
> Set: None
> Locator: DIMM_B1
> Bank Locator: A1_BANK2
> Type: DDR3
> Type Detail: Synchronous Unbuffered (Unregistered)
> Speed: 1600 MHz
> Manufacturer: Undefined
> Serial Number: 00000000
> Asset Tag: A1_AssetTagNum2
> Part Number: F3-2133C9-4GXL
> Rank: 2
> Configured Clock Speed: 1600 MHz
>
> Handle 0x0036, DMI type 20, 35 bytes
> Memory Device Mapped Address
> Starting Address: 0x00100000000
> Ending Address: 0x001FFFFFFFF
> Range Size: 4 GB
> Physical Device Handle: 0x0035
> Memory Array Mapped Address Handle: 0x0030
> Partition Row Position: 1
>
> Handle 0x0037, DMI type 17, 34 bytes
> Memory Device
> Array Handle: 0x002F
> Error Information Handle: Not Provided
> Total Width: Unknown
> Data Width: 64 bits
> Size: No Module Installed
> Form Factor: Unknown
> Set: None
> Locator: DIMM_B2
> Bank Locator: A1_BANK3
> Type: Unknown
> Type Detail: None
> Speed: Unknown
> Manufacturer: A1_Manufacturer3
> Serial Number: A1_SerNum3
> Asset Tag: A1_AssetTagNum3
> Part Number: Array1_PartNumber3
> Rank: Unknown
> Configured Clock Speed: Unknown
> […]
> $ > sudo lshw
> […]
> *-memory
> description: Mémoire système
> identifiant matériel: 0
> taille: 6872MiB
> *-cpu
> produit: AMD A10-7700K Radeon R7, 10 Compute Cores
> 4C+6G
> […]
> $ > dmesg
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Initializing cgroup subsys cpuacct
> [ 0.000000] Linux version 3.16.0-4-amd64
> (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian
> 4.8.4-1) )
> #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24)
> [ 0.000000] Command line:
> BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64
> root=/dev/mapper/Aethelthryth--vg-root ro quiet
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem
> 0x0000000000000000-0x000000000009e7ff]
> usable
> [ 0.000000] BIOS-e820: [mem
> 0x000000000009e800-0x000000000009ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000000e0000-0x00000000000fffff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x0000000000100000-0x000000009d26efff]
> usable
> [ 0.000000] BIOS-e820: [mem
> 0x000000009d26f000-0x000000009d29efff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x000000009d29f000-0x000000009d2aefff]
> ACPI data
> [ 0.000000] BIOS-e820: [mem
> 0x000000009d2af000-0x000000009d7eafff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem
> 0x000000009d7eb000-0x000000009e3e5fff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x000000009e3e6000-0x000000009e3e6fff]
> usable
> [ 0.000000] BIOS-e820: [mem
> 0x000000009e3e7000-0x000000009e5ecfff]
> ACPI NVS
> [ 0.000000] BIOS-e820: [mem
> 0x000000009e5ed000-0x000000009ea32fff]
> usable
> [ 0.000000] BIOS-e820: [mem
> 0x000000009ea33000-0x000000009eff3fff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x000000009eff4000-0x000000009effffff]
> usable
> [ 0.000000] BIOS-e820: [mem
> 0x00000000f8000000-0x00000000fbffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000feb80000-0x00000000fec01fff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000fec10000-0x00000000fec10fff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000fed00000-0x00000000fed00fff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000fed40000-0x00000000fed44fff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000fed80000-0x00000000fed8ffff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x00000000ff000000-0x00000000ffffffff]
> reserved
> [ 0.000000] BIOS-e820: [mem
> 0x0000000100000000-0x000000021effffff]
> usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.7 present.
> [ 0.000000] DMI: System manufacturer System Product
> Name/A88XM-PLUS,
> BIOS 2302 04/28/2015
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable
> ==>
> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn =
> 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF write-through
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-E7FFF uncachable
> [ 0.000000] E8000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000000 mask FFFF80000000
> write-back
> [ 0.000000] 1 base 000080000000 mask FFFFE0000000
> write-back
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] TOM2: 000000021f000000 aka 8688M
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406,
> new
> 0x7010600070106
> [ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable
> ==>
> reserved
> [ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn =
> 0x400000000
> [ 0.000000] found SMP MP-table at [mem
> 0x000fd710-0x000fd71f] mapped
> at [ffff8800000fd710]
> [ 0.000000] Base memory trampoline at [ffff880000098000]
> 98000 size
> 24576
> [ 0.000000] Using GB pages for direct mapping
> [ 0.000000] init_memory_mapping: [mem
> 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
> [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
> [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem
> 0x21ee00000-0x21effffff]
> [ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
> [ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem
> 0x21c000000-0x21edfffff]
> [ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem
> 0x200000000-0x21bffffff]
> [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem
> 0x00100000-0x9d26efff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
> [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
> [ 0.000000] [mem 0x80000000-0x9d1fffff] page 2M
> [ 0.000000] [mem 0x9d200000-0x9d26efff] page 4k
> [ 0.000000] init_memory_mapping: [mem
> 0x9e3e6000-0x9e3e6fff]
> [ 0.000000] [mem 0x9e3e6000-0x9e3e6fff] page 4k
> [ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem
> 0x9e5ed000-0x9ea32fff]
> [ 0.000000] [mem 0x9e5ed000-0x9e5fffff] page 4k
> [ 0.000000] [mem 0x9e600000-0x9e9fffff] page 2M
> [ 0.000000] [mem 0x9ea00000-0x9ea32fff] page 4k
> [ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem
> 0x9eff4000-0x9effffff]
> [ 0.000000] [mem 0x9eff4000-0x9effffff] page 4k
> [ 0.000000] init_memory_mapping: [mem
> 0x100000000-0x1ffffffff]
> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
> [ 0.000000] RAMDISK: [mem 0x35e22000-0x36f08fff]
> [ 0.000000] ACPI: Early table checksum verification
> disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02
> ALASKA)
> [ 0.000000] ACPI: XSDT 0x000000009D2A6080 000074 (v01
> ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: FACP 0x000000009D2AD5D8 00010C (v05
> ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field
> Pm2ControlBlock has zero address or length:
> 0x0000000000000000/0x1
> (20140424/tbfadt-649)
> [ 0.000000] ACPI: DSDT 0x000000009D2A6188 00744C (v02
> ALASKA A M I
> 00000000 INTL 20051117)
> [ 0.000000] ACPI: FACS 0x000000009D7E0080 000040
> [ 0.000000] ACPI: APIC 0x000000009D2AD6E8 00007E (v03
> ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: FPDT 0x000000009D2AD768 000044 (v01
> ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: MCFG 0x000000009D2AD7B0 00003C (v01
> ALASKA A M I
> 01072009 MSFT 00010013)
> [ 0.000000] ACPI: BGRT 0x000000009D2AED48 000038 (v00
> ALASKA A M I
> 01072009 AMI 00010013)
> [ 0.000000] ACPI: HPET 0x000000009D2AD848 000038 (v01
> ALASKA A M I
> 01072009 AMI 00000005)
> [ 0.000000] ACPI: UEFI 0x000000009D2AD880 000042 (v01
> ALASKA A M I
> 01072009 00000000)
> [ 0.000000] ACPI: SSDT 0x000000009D2AD8C8 000B9C (v01 AMD
> BANTRY
> 00000001 AMD 00000001)
> [ 0.000000] ACPI: SSDT 0x000000009D2AE468 00033B (v02 AMD
> BANTRY
> 00000002 MSFT 04000000)
> [ 0.000000] ACPI: CRAT 0x000000009D2AE7A8 0005A0 (v01 AMD
> BANTRY
> 00000001 AMD 00000001)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at [mem
> 0x0000000000000000-0x000000021effffff]
> [ 0.000000] Initmem setup node 0 [mem
> 0x00000000-0x21effffff]
> [ 0.000000] NODE_DATA [mem 0x21eff7000-0x21effbfff]
> [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD ->
> [ffff880217600000-ffff88021d9fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x21effffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
> [ 0.000000] node 0: [mem 0x00100000-0x9d26efff]
> [ 0.000000] node 0: [mem 0x9e3e6000-0x9e3e6fff]
> [ 0.000000] node 0: [mem 0x9e5ed000-0x9ea32fff]
> [ 0.000000] node 0: [mem 0x9eff4000-0x9effffff]
> [ 0.000000] node 0: [mem 0x100000000-0x21effffff]
> [ 0.000000] On node 0 totalpages: 1820255
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 8760 pages used for memmap
> [ 0.000000] DMA32 zone: 640706 pages, LIFO batch:31
> [ 0.000000] Normal zone: 16072 pages used for memmap
> [ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10]
> enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11]
> enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12]
> enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13]
> enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge
> lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000]
> gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address
> 0xfec00000, GSI
> 0-23
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec01000]
> gsi_base[24])
> [ 0.000000] IOAPIC[1]: apic_id 1, version 33, address
> 0xfec01000, GSI
> 24-55
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
> dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
> low
> level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration
> information
> [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 72
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x0009e000-0x0009efff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x000a0000-0x000dffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x000e0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9d26f000-0x9d29efff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9d29f000-0x9d2aefff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9d2af000-0x9d7eafff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9d7eb000-0x9e3e5fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9e3e7000-0x9e5ecfff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9ea33000-0x9eff3fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x9f000000-0xf7ffffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xf8000000-0xfbffffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfc000000-0xfeb7ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfeb80000-0xfec01fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfec02000-0xfec0ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfec10000-0xfec10fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfec11000-0xfecfffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed00000-0xfed00fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed01000-0xfed3ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed40000-0xfed44fff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed45000-0xfed7ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed80000-0xfed8ffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xfed90000-0xfeffffff]
> [ 0.000000] PM: Registered nosave memory: [mem
> 0xff000000-0xffffffff]
> [ 0.000000] e820: [mem 0x9f000000-0xf7ffffff] available for
> PCI
> devices
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512
> nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88021ec00000
> s80896
> r8192 d21504 u524288
> [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288
> alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility
> grouping on.
> Total pages: 1795346
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line:
> BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64
> root=/dev/mapper/Aethelthryth--vg-root ro quiet
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768
> bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
> [ 0.000000] AGP: Checking aperture...
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] AGP: Node 0: aperture [bus addr
> 0x00000000-0x01ffffff]
> (32MB)
> [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory
> hole
> [ 0.000000] AGP: Please enable the IOMMU option in the BIOS
> setup
> [ 0.000000] AGP: This costs you 64MB of RAM
> [ 0.000000] AGP: Mapping aperture over RAM [mem
> 0x94000000-0x97ffffff] (65536KB)
> [ 0.000000] PM: Registered nosave memory: [mem
> 0x94000000-0x97ffffff]
> [ 0.000000] Memory: 7017680K/7281020K available (5209K
> kernel code,
> 946K rwdata, 1832K rodata, 1204K init, 840K bss, 263340K
> reserved)
> […]
>
> Pour dmesg, j'ai arrêté la sortie à la ligne où il est
> manifeste que le
> système ne détecte pas tout ce qu'il devrait en RAM, donc la
> réponse
> doit être située dans ce qui précède cette ligne, mais je n'en
> sais pas
> encore assez sur ces messages pour les analyser correctement.
> Quelqu'un
> de meilleur que moi verrait-il de quoi il retourne ?
>
> Dans l'attente de vos suggestions,
>
> Cordialement.
> --
> David Guyot
>
>
--
David Guyot
Administrateur système, réseau et télécom / Sysadmin
Europe Camions Interactive / Stockway
Moulin Collot
F-88500 Ambacourt
03 29 30 47 85
Attachment:
signature.asc
Description: This is a digitally signed message part